SPECIFICATION CONTROL DRAWING 5028D5312 Date 7-15-13 50 OHM, AWG 28, 7 STRANDS OF AWG 36, TRIAXIAL CABLE CHEMINAX Revision E THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE DESIGNATED. CHARACTERISTIC IMPEDANCE 50 2 ohms, Method A CAPACITANCE 27.8 pF/ft. (nominal) CONDUCTOR 28.3 pF/ft. (maximum) .0150 AWG 28, 7 Strands of VELOCITY OF PROPAGATION 73% (nominal) AWG 36, Silver-Coated Copper ATTENUATION 92.0 dB/100 ft. (maximum) at 4 GHz DIELECTRIC ADDITIONAL REQUIREMENTS .039 Rayfoam L .003 Color - Natural ELECTRICAL CONDUCTOR RESISTANCE 62.0 ohms/1000 ft. (nominal) st INSULATION RESISTANCE 10,000 megohms (minimum) 1 SHIELD CONDUCTOR TO SHIELD for 1000 ft. .052 AWG 40, Silver-Coated Copper JACKET FLAWS SPARK TEST 1.0 kV (rms) IMPULSE TEST 6.0 kV (peak) VOLTAGE WITHSTAND st 1 JACKET CONDUCTOR TO SHIELD 750 volts (rms) (minimum) .072 Thermorad F SHIELD TO SHIELD 500 volts (rms) (minimum) Color - White ENVIRONMENTAL FLAMMABILITY Method C nd 2 SHIELD HEAT SHOCK 225C .085 AWG 40, LOW TEMPERATURE-COLD BEND -55C/3.00 inch mandrel Silver-Coated Copper VOLTAGE WITHSTAND 1000 volts (rms), 1 minute (Post Environmental) PHYSICAL INSULATION (DIELECTRIC) ELONGATION 50% (minimum) nd 2 JACKET 2 TENSILE STRENGTH 1000 lbf/in (minimum) .105 Thermorad F (nominal) JACKET (EACH) .110 ELONGATION 100% (minimum) 2 (maximum) TENSILE STRENGTH 2000 lbf/in (minimum) JACKET THICKNESS (EACH) .008 inch (minimum) .010 inch (nominal) SHIELD COVERAGE (EACH) 90% (minimum) Outer jacket color will be white (designated by a -9 appended to the part number, e.g. 5028D5312-9) unless otherwise specified. Designate outer jacket color with a dash number in accordance with MIL-STD-681. Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. WEIGHT 8.8 lbs/1000 ft. (nominal) Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. Page 1 of 1 Rayfoam, Thermorad, Cheminax, Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Raychem Wire & Cable THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS 501 Oakside Avenue REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE Redwood City, California 94063-3800 ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. 1-800-227-8816 Fax: 1-650-361-6297 2013 Tyco Electronics Corporation, All rights reserved.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Fiber Optic Connectors category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : 0004700001 6100-R 6313 F709034706 F709722200 F709730000 F718183204 F727403500 F727752800 FCXO-12-3BY FO- SCREW(M2X6) 9440F20-27S-190 944-120-6001 944-125-6003 9441F10SL-3P 953-101-5310-P 954-101-57202B A0270169 12-9122 12- 5702 143025NC DSAKB AX101713 AX102420 AX103923 AX104193 AX104230 AX104562 AX104683 AX105203-B25 AX105205-S1 EHSC2M 17-300800 180-044NF06-11-2S 180-044NF06-17-8P 180-044NF07-11-2S 181-011-126 181-011-S 181-057-126 BT34IW HRFCP-HSCJ-1(61) HRFC-R2(40) NKSOPBUY 20500002116 2064996-1 20800001065 2170 9132 2612 2620