5-1393127-5 TE Connectivity

General Purpose Panel/Plug-in Relays Potter & Brumfield PRD Series Power Relay n Contact ratings to 50A n Magnetic blowouts available for switching DC loads n Contact arrangement up to 2 form C (2CO) n 1 form C auxiliary switch available n UL class B insulation Typical applications Industrial controls, lighting. Approvals Contact ratings (continued) UL E22575 CSA LR15734 VDE Reg.Nr.C144 Type Load Cycles 1) Models with all screw terminals are UL Listed. Others are UL Recognized. UL 508 Technical data of approved types on request. Models with screws or quick connects for main terminals Code F, AgCdO, 1 pole 2) 3 Contact Data 50A, 240VAC, general purpose 20x10 3 Contact arrangement 1 and 2 form A (NO) 1 and 2 form C (CO) 30A, 277VAC, resistive 100x10 3 1 form X (NO-DM) 1.5HP, 120VAC 100x10 3 Rated voltage 600VAC,125VDC 2HP, 250VAC 100x10 3 Rated current 50A 10A, 600VAC 100x10 Contact material Ag, AgCdO, W Code F, AgCdO, 2 pole 2) 3 Min. recommended contact load 1A, 12VDC or 12VAC 50A, 240VAC, general purpose 20x10 3 Initial contact resistance 75m max. 30A, 240VAC 100x10 3 Initial voltage drop 75mV 20A, 277VAC 100x10 3 Frequency of operation 7200 ops/hr 1.5HP, 120VAC 100x10 3 Operate/releases time max. 40/20ms 2HP, 250VAC 100x10 3 Bounce time max. 10ms 10A, 600VAC 100x10 2) In order to achieve 50A rating with contact code F, termination Code 0 or A is required. Contact ratings Code H, Ag with magnetic blowout, 1 or 2 pole Type Load Cycles 1) 3 20A, 125VDC 100x10 UL 508 3 1/3HP, 125VDC 100x10 Models with screws or quick connects for main terminals Code J, AgCdO with magnetic blowout, 1 or 2 pole Code Y, Ag, 1 pole 3 3 20A, 125VDC 100x10 25A, 277VAC 100x10 3 3 1/3HP, 125VDC 100x10 1HP, 120VAC 100x10 3 Code N, W stationary with AgCdO movable, 1 or 2 pole 2HP, 250VAC 100x10 3 3 25A, 250VAC 100x10 10A, 600VAC 100x10 3 3 1HP, 125VAC 100x10 7A, 50VDC, resistive 100x10 3 2HP, 250VAC 100x10 Code Y, Ag, 2 pole 3 1) UL 508 25A, 240VAC 100x10 3 Models with box lugs for main terminals 20A, 277VAC 100x10 3 Code P, Ag, 1 form X 1HP, 120VAC 100x10 3 3 50A, 277VAC, general purpose 100x10 2HP, 250VAC 100x10 3 3 30A, 277VAC, ballast 6x10 7A, 50VDC, resistive 100x10 3 3 15A, 277VAC, tungsten 6x10 10A, 600VAC 100x10 3 102LRA, 17FLA, 240VAC 30x10 Code G, AgCdO, 1 pole 3 3 120LRA, 20FLA, 120VAC 30x10 30A, 277VAC, resistive 100x10 3 3 1.5HP, 120VAC 30x10 1.5HP, 120VAC 100x10 3 3 3HP, 240VAC 30x10 2HP, 250VAC 100x10 3 Factory ratings 10A, 600VAC 100x10 Models with box lugs for main terminals Code G, AgCdO, 2 pole 3 Code R, Ag with magnetic blowout, 1 form X 30A, 240VAC 100x10 3 3 60A, 28VDC, resistive 100x10 20A, 277VAC 100x10 3 3 30A, 125VDC 100x10 1.5HP, 120VAC 100x10 3 2HP, 250VAC 100x10 3 6 5 Mechanical endurance DC Coil, 1x10 ops. AC Coil 5x10 ops. 10A, 600VAC 100x10 1) Any PRD relay deviating electrically or physically from the standard models in the table is not UL or CSA listed. All horsepower ratings are for single phase motors.. Auxiliary Snap-Action Switch Contact Data Contact arrangement 1 form C (CO) Rating 5A, 120VAC, 60Hz., 25C Contact material Ag 1 06-2015, Rev. 0615 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2015 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company. General Purpose Panel/Plug-in Relays Potter & Brumfield PRD Series Power Relay (Continued) Coil Data Insulation Data Coil voltage range 6 to 110VDC Initial dielectric strength 6 to 480VAC between open contacts 2000V rms Coil insulation system according UL Class B between contact and coil 2000V rms Coil versions, DC coil between adjacent contacts 2000V rms Coil Rated Operate Release Coil Rated coil Initial insulation resistance code voltage voltage voltage resistance power between insulated elements 100M VDC VDC VDC 10% W 6 6 4.5 0.6 18 2 Other Data 12 12 9 1.2 71 2 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 24 24 18 2.4 288 2 refer to the Product Compliance Support Center at 48 48 36 4.8 1150 2 www.te.com/customersupport/rohssupportcenter 110 110 82.5 11 6050 2 Ambient temperature All figures are given for coil without preenergization, at ambient temperature +23C. AC coil: -55C to 45C Other coil voltages on request. DC coil: -55C to 80C Category of environmental protection Coil versions, AC coil IEC 61810 RT0 - open relay Coil Rated Operate Release Coil Rated coil Terminal type Screw, Quick connects, Box lugs code voltage voltage voltage resistance power Weight 284g VAC VAC VAC 15% VA Packaging/unit tray/20 pcs., box/40pcs. 6 6 5.1 0.6 0.86 9.8 12 12 10.2 1.2 3.2 9.8 Accessories 24 24 20.4 2.4 12 9.8 120 120 102 12 290 9.8 Product Code Description 240 240 204 24 1200 9.8 35D013 Metal dust cover 480 480 408 48 4500 9.8 All figures are given for coil without preenergization, at ambient temperature +23C. Other coil voltages on request. Dimensions PRD/PRDA 1, 3, 5 and 7 PRD/PRDA 11 PRD-3 P and R 2 MTG. HOLES DIA. 2.5 MAX875 MAX875 MAX31 .31 3.375 MAX31 .187 + .005 (63.3) (22.23) (22.23) (7.9) .003 (7.9) (85.73) (7.9) .81 1.687 4.75 + .13 (42.85) (20.6) ( ) .08 4 2 4 2 2 6 6 6 8 2.51 MAX. 2.50 2.51 MAX. (63.5) (63.75) (63.8) COIL COIL BOX LUG COIL 1.875 1.875 1.875 (47.63) CONNECTOR (47.63) 7 (47.63) 5 5 3 1 1 3 5 1 2 MTG. HOLES .81 2 MTG. HOLES DIA. (20.6) DIA187 + .005 .59 MAX. 2.5 MAX187 + .005 .003 (15.0) (64) .003 4.75 + .13 ( ) 4.75 + .13 .08 ( ) .08 2.28 MAX. (57.9) 2.50 MAX. 2.50 MAX.ON PRD7 2.28 MAX. (63.5) (57.9) (63.5) .375 (9.53) 2.23 3.00 (56.6) (76.2) .375 3.375 .375 4.250 MAX. (9.53) (9.53) (85.73) (107.95) 3.375 MAX. 2.5 MAX. W/O AUX SWITCH W/O AUX SWITCH (85.73) (63.5) 2 06-2015, Rev. 0615 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2015 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company.