5510700002 TE Connectivity

TAK-Caps Adhesive-Lined Cap Table 1: Dimensions (inches) Open Barrel Length Overall Length Expanded Recovered Recovered Wall with As Supplied As Supplied I.D. Minimum I.D. adhesive Minimum Size Minimum (1) Maximum (L) (D) Maximum (d) (W) 1/8 .125 .040 .019 .620 1.060 3/16 .187 .070 .024 .620 1.060 Color: Natural Material: The caps shall be fabricated from modified polyvinylidene fluoride with an interior coating of thermoplastic adhesive. Table 2: Properties: Values apply only to outer jacket. Properties Unit Requirements Method of Test Longitudinal Change Percent +0, -10 ASTM D 2671 3 minutes at 200C Tensile Strength PSI 5000 minimum ASTM D 2671 1-inch bench marks Ultimate Elongation Percent 150 minimum 1-inch jaw separation 2-inches/minute jaw separation speed Dielectric Strength Volts/mil 500 minimum ASTM D 2671 Note 1 13 Volume Resistivity ohm-cm 10 ASTM D 2671 Note 1: Recover the specimens on metal mandrels for 10 minutes at 175 3C, or until the specimens are completely shrunk on the mandrel. Acceptance Tests: Visual Appearance Dimensions Specification Control Drawing Tyco Electronics Corporation Title: TAK-Caps 300 Constitutional Drive Adhesive-Lined Cap Menlo Park, CA 94025 USA Tyco Electronics reserves the right to amend this drawing at any Document No : time. Users should evaluate the suitability of the product for their TAK-Caps application Cage Code: Scale: Size: Rev. Date: Rev.: Sheet: 06090 None A 30-Oct-96 E 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Heat Shrink Tubing and Sleeves category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : 770-006S102 5685710001 CR8248-000 CR9960-000 603312-4 607381P039 611112-000 617867N001 6500750004 CZ1420-000 D-306-38 770-007A303 770-010Y106W1 770-010Y706W1 7771210001 MFP-1/4 -Clear MFP-3/64 -Clear 790-3012 MFT-MT2000-NO.14-0-SP MHHT-4-15K2-G-104 MIL-LT-1-1/2-4-SP MIL-LT-1-1/2-9-STK MIL-LT-1/2-2-STK MIL-LT-3-0-SP MIL-LT-3/32-0-SP MIL-LT-3/32-6- SP MIL-LT-3/4-6-SP MIL-LT-3/8-0-SP 8159270001 839602-000 8423-6 FP301-116-6 -Black FP301-1/2-48 -Black FP301-12-48 -Black- Hdr FP301-1/4-48 -Black FP301-1/4-48 -White-Hdr FP301-1-6 -Clear FP301-18-48 -Black-Hdr FP301-1/8-6 -Black FP301-18-6 -Black- Bulk FP301-316-48 -Blue-Hdr FP301-316-6 -Clear FP301-332-6 -Black 912229N002 120-126-16BL 121-001-09 121-018-32 121-018-40 121-123-1-1-32BTC 121-123-1-1-40BTC