55A7113 SPECIFICATION CONTROL DRAWING TITLE Date Revision WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED, 6-10-11 R NORMAL WEIGHT, 600 VOLT This specification sheet forms a part of the latest issue of Raychem Specification 55PC. INSULATION - RADIATION-CROSSLINKED, CONDUCTOR - BARE COPPER MODIFIED ETFE TABLE I. CONSTRUCTION DETAILS DIAMETER OF FINISHED WIRE STRANDED WIRE CONDUCTOR MAXIMUM PART NUMBER MAXIMUM CONDUCTOR SIZE STRANDING RESISTANCE DIAMETER 1/ WEIGHT (in.) (AWG) (number x AWG) AT 20C (in.) (lbs/1000 ft.) MINIMUM MAXIMUM (ohms/1000 ft) 55A7113-22-* 22 7 x 30 .029 .030 16.0 .050 .003 3.2 55A7113-20-* 20 7 x 28 .037 .038 10.0 .058 .003 4.8 55A7113-18-* 18 19 x 30 .045 .048 6.58 .066 .003 6.7 55A7113-16-* 16 19 x 29 .052 .057 4.61 .075 .003 9.3 55A7113-14-* 14 19 x 27 .071 .075 2.96 .092 .003 14.5 55A7113-12-* 12 37 x 28 .088 .092 1.73 .110 .003 23.7 55A7113-10-* 10 37 x 25 .111 .115 1.15 .133 .004 36.5 TABLE II. PERFORMANCE DETAILS BEND TESTING PART NUMBER MANDREL DIAMETER WEIGHT 1/ (inch) ( 3%) (lb) ( 3%) CROSSLINK VERIFICATION CROSSLINK VERIFICATION 55A7113-22-* .500 2.00 55A7113-20-* .500 3.00 55A7113-18-* .750 4.00 55A7113-16-* 1.00 4.00 55A7113-14-* 1.00 6.00 55A7113-12-* 1.50 6.00 55A7113-10-* 2.00 6.00 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER. AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Raychem Wire & Cable 501 Oakside Avenue DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL. Redwood City, CA 94063-3800 Page 1 of 2 Phone: 1-800-227-8816 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. Fax: 1-650-361-6297 REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. 2011 Tyco Electronics Corporation. All rights reserved.Revi- SCD Page 2 of 2 R SPECIFICATION CONTROL DRAWING 55A7113 WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 200C at 3000 hours (minimum) VOLTAGE RATING: 600 volts (rms) at sea level COLOR: White preferred CROSSLINK VERIFICATION: 300 3C for 1 hour IDENTIFICATION AND COLOR STRIPING DURABILITY: 125 cycles (250 strokes) (minimum), 500 g weight INSULATION ELONGATION AND TENSILE STRENGTH: Elongation, 50% (minimum) 2 Tensile Strength, 5000 lbf/in (minimum) INSULATION FLAWS: Spark Test, 3.0 kV (rms) Impulse Dielectric Test, 8.0 kV (peak) INSULATION THICKNESS: .008 in. (minimum), .010 in. (nominal) SHRINKAGE: 230 3C for 1 hour, 0.125 in. (maximum) in 12 inches VOLTAGE WITHSTAND (Post Environmental): 2500 volts (rms) PART NUMBER: The * in the part numbers on page 1 shall be replaced by a color code designator. 1/ Example: AWG 16, white, 55A7113-16-9 AWG 16, white with a black stripe: 55A7113-16-90 1/ See footer section on page 1