601966-6 TE Connectivity

Instruction Sheet Application Tooling for Screw-Machine Contacts 408-7516 14 FEB 18 Rev F PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available. 1. INTRODUCTION This instruction sheet covers tooling selections for crimping, inserting, and extracting screw-machine contacts, and manual application procedures. Application procedures for the other tools are packaged with the tool. NOTE Read these instructions thoroughly before making any selections. NOTE Dimensions in this instruction sheet are in millimeters with inches in brackets . Figures and illustrations are for reference only and are not drawn to scale. Reasons for reissue of this instruction sheet are provided in Section 7, REVISION SUMMARY. 2. DESCRIPTION The screw-machine contacts are supplied in loose-piece for manual (4/8-indent hand crimping tools) application and tape mounted for power assisted (machine) application. Insertion and extraction tools are used to insert contacts into and extract contacts from connectors (see Figure 1). Figure 1 The military uses a standardized numbering system which pertains to the tools that are qualified to military specifications (spec). Refer to Figure 2 for a cross-reference of these tools. Refer to Figure 3 for proper contact and tooling combination. Note: Read the chart from the left page across to the right page. 2018 TE Connectivity Ltd. family of companies. PRODUCT INFORMATION 1-800-522-6752 This controlled document is subject to change. 1 of 19 All Rights Reserved. For latest revision and Regional Customer Service, *Trademark visit our website at www.te.com. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners. 408-7516 Part Description Military Spec Number 601966 1 MIL C 22520/2 01 601967 1 MIL C 22520/1 01 4/8 Indent Hand Crimping Tool 608651 1 ---- -- 601966 2 MIL C 22520/2 02 601966 4 MIL C 22520/2 06 601966 5 MIL C 22520/2 08 Positioner or Turret Head 601966 6 MIL C 22520/2 09 601966 8 MIL C 22520/2 23 601967 2 MIL C 22520/1 02 1 601967 2 MIL C 22520/1 11 91066 1 MIL I 81969/1 01 or MS3156 22 91067 1 MIL I 81969/1 04 Insertion/Extraction Tool 91067 2 MIL I 81969/1 02 or MS3156 20 91066 3 MIL I 81969/1 03 or MS3156 16 445147 1 MIL C 81969/28 02 58284 1 MIL C 81969/28 03 Extraction Tool 91074 1 MIL C 81969/28 01 or MS3178 001 Figure 2 2 of 19 Rev F