6609044-1 TE Connectivity

Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 Multipurpose Power Line RFI Filter for Emission Control V and W Series UL Recognized CSA Certied VV1 / VW1 VDE ApprovedE VV6 / VW6 Both the V and W series are effective to control Specications 2 emissions in equipment using SCR and T L circuits Maximum leakage current each Line to Ground: for compliance with FCC Part 15, Subpart J and 120 VAC 60 Hz: .5 mA EN55022, Level A, down to 150kHz 250 VAC 50 Hz: .82 mA Hipot rating (one minute): Line to Ground: 2250 VDC V Series Line to Line: 1450 VDC Offers an N = 3 (T) Line to Ground impedance to Rated Voltage (max): 250 VAC common mode and an N = 5 Dbl. Pi) impedance for Line to Line differential mode interference Operating Frequency: 50/60 Hz Designed for susceptibility use when equipment Rated Current: 3 to 20A* impedance at RF frequencies is low Operating Ambient Temperature Range (at rated current I ): -10C to +40C W Series r In an ambient temperature (T ) higher than +40C a Offers an N = 4 (Dbl. L) Line to Ground the maximum operating current (I ) is calculated as o impedance for common mode and an N=5 (Dbl. follows: I = I (85-Ta)/45 o r Pi) impedance for Line to Line differential mode interference Electrical Schematics Designed for use when equipment impedance at V Series RF frequencies is high LINE LOAD Two stage construction provides excellent suppression at high frequencies Ordering Information 20 V V 6 W Series (3, 6 & 10A) LINE LOAD Input / Output Style 1 .250 6.3 spade terminals 6 Threaded bolt 7 IEC inlet* (line side) .250 6.3 spade terminals W Series (20A) (load side) LINE LOAD V or W Series Leakage current designation V Standard Current Rating B20VW7, 20A model tested by Underwriters Laboratories 3, 6, 10 or 20A to US and Canadian requirements and is VDE approved at 16A, 250VAC *IEC 60320-1 C20 inlet mates with C19 connector 86 Dimensions are in inches and millimeters unless otherwise specied. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specications subject to change.RFI Power Line Filters Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 Multipurpose Power Line RFI Filter for Emission Control (continued) Case Styles (continued) V and W Series VW7 Threaded inserts Available Part Numbers 3VV1 3VW1 2.25 6VV1 3VW1 B 57.15 10VV1 10VW1 20VV1 20VW1 1 20VV6 20VW6 .047 .010 1.19 .25 20VW7* 5.33 .025 135.38 .635 A C Case Styles V1 / W1 (3, 6 & 10A) Recommended Panel Cutout B .157 Dia. 2.30 3.98 58.42 D E 1.22 1.60 C L 30.99 40.46 C A .75 19.05 .219 Mounting Plane R 5.56 2.12 53.85 V1 / W1 (20A) Case Dimensions A B CD E Part No. E D B 3VV1, 3VW1 6VV1, 6VW1 2.00 50.8 10VV1, 10VW1 A C 20VV1, 20VW1 V6 / W6 20VV6, 20VW6 20VW7 E D B 2.00 50.8 A C *20VW7, 20A model tested by Underwriters Laboratories to US and Canadian requirements and is VDE approved at 16A, 250VAC 87 Dimensions are in inches and millimeters unless otherwise specied. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specications subject to change.