7-1393148-8 TE Connectivity

General Purpose Panel/Plug-in Relays SCHRACK Power Relay RM 5/6/B 3mm n 2 and 3 pole 10/16A, 2 form A (2 NO) or 3 form A (3 NO) contacts n 3mm contact gap n DC or AC coil n Push-to-test button n Plug-in version, PCB terminals, chassis or DIN rail mount Typical applications Power supplies, pump control. Z Approvals Coil Data VDE Cert. No. 40003144, UL E214025 Coil voltage range 6 to 220 VDC Technical data of approved types on request. 12 to 400 VAC Operative range, IEC 61810 90 to 100% of rated coil voltage Contact Data RM5 RM6 RMB Coil insulation system according UL class 130 (B) Contact arrangement 2 form A 3 form A 3 form A 2 NO 3 NO 3 NO Coil versions, DC coil Contact gap 3mm 3mm 3mm Coil code Rated Coil Rated coil Rated voltage 400VAC 230VAC 230VAC 2) STD LED PD LED+ voltage resistance power Max. switching voltage 440VAC 400VAC 400VAC 2) 1) bipolar PD VDC 10% W Rated current 16A 10A 16A Coil versions, DC coil, RM5, RM6 Limiting making current, max 20ms 30A 25A 30A 006 L06 0A6 LA6 6 24 1.5 Switching power 6000VA 3800VA 6000VA 012 L12 0B2 LB2 12 86 1.7 Contact material AgNi90/10 024 L24 0C4 LC4 24 345 1.7 Min. recommended contact load 24VDC/100mA 048 L48 0E8 LE8 48 1340 1.7 -1 Frequency of operation, with/without load 960/6000h 060 L60 0G0 LG0 60 2200 1.6 Operate/release time max., DC coil 20/5ms 110 M10 1B0 MB0 110 7300 1.7 Bounce time max., form A, DC coil 4ms 1) 221 N21 2C1 NC1 220 30000 1.6 Coil versions, DC coil, RMB Contact ratings 012 - - - 12 62.6 2.3 Type Contact Load Cycles 024 - - - 24 250 2.3 IEC 61810 Operate voltage, DC coil 75% of rated coil votage 3 RM5 A (NO) 16A, 230/400VAC, cos=1, 35C 100x10 Release voltage, DC coil 10% of rated coil voltage 3 RM5 (DC) A (NO) 12A, 400VAC, cos=1, same. pol., 70C 100x10 1) Coil resistance 15%, 3 RM5 A (NO) 10A, 48VDC, 70C 30x10 2) Protection diode PD standard polarity: +A1 / -A2. 3 RM5 A (NO) 10A, 400VAC, 70C 30x10 All figures are given for coil without pre-energization, at ambient temperature +23C. 3 RM6 A (NO) 10A, 230/400VAC, cos=1, 35C to 50C 100x10 RM 5/6 3 RM6 (DC) A (NO) 12A, 400VAC, cos=1, same. pol., 50C 100x10 3 RMB A (NO) 16A, 400VAC same polarity, cos=1, 40C 100x10 UL 508 3 RM5 A (NO) 16A, 415VAC, resistive, 50C 100x10 3 RM5 A (NO) 16A, 277VAC, general purpose, 50C 30x10 3 RM6 A (NO) 10A, 415VAC, resistive, DC-coil, 70C 100x10 3 RM6 A (NO) 10A, 415VAC, resistive, AC-coil, 50C 100x10 3 RM6 A (NO) 10A, 277VAC, gen. purp., DC-coil, 70C 30x10 3 RM6 A (NO) 10A, 277VAC, gen. purp., AC-coil, 50C 30x10 3 RMB A (NO) 16A, 277VAC, general purpose, 25C 30x10 Mechanical endurance 6 DC coil 15x10 operations 6 AC coil 10x10 operations 1 02-2019, Rev. 0219 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2015 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company. General Purpose Panel/Plug-in Relays SCHRACK Power Relay RM 5/6/B 3mm (Continued) Accessories Coil Data (continued) Sockets for Plug-in version RM**2: Coil versions, AC coil For details see datasheet Accessories Power Relay RM Coil code Rated Operate Release Coil Rated coil Note: indicated contact ratings and electrical endurance data for direct STD LED voltage voltage voltage resistance power wiring of relays (according IEC 61810-1) for relays mounted on sockets 50/60Hz 50/60Hz 50/60Hz 1) deratings may apply. VAC VAC VAC 10% VA Coil versions, AC-coil, RM5, RM6 512 R12 12 9.6/10.2 3.6 19.5 2.71/2.27 524 R24 24 19.2/20.4 7.2 80 2.62/2.00 548 R48 48 38.4/40.8 14.4 320 2.60/2.17 560 R60 60 48.0/51.0 18.0 500 2.62/2.20 615 S15 115 92.0/97.8 34.5 1850 2.65/2.22 730 T30 230 184.0/195.5 69.0 7500 2.69/ 2.26 1) 900 V00 400 320.0/340.0 120.0 23500 2.61/2.20 1) Coil resistance 15%. PCB layout / terminal assignment All figures are given for coil without pre-energization, at ambient temperature +23C. Bottom view on pins 3 form A (3 NO) contacts Insulation Data RM5 RM6 RMB Initial dielectric strength between open contacts 2500Vrms 2500Vrms 2500Vrms between contact and coil 2500Vrms 2500Vrms 2500Vrms between adjacent contacts 2500Vrms 2500Vrms 2500Vrms Initial surge withstand voltage 4000V 4000V 4000V between contact and coil 5000V 4000V 4000V between adjacent contacts, RM5 6000V - - Clearance/creepage between contact and coil 4.0/14.9mm 2 form A (2 NO) contacts between adjacent contacts 6.1/7.3mm Material group of insulation parts IIIa Other Data RM5 RM6 RMB Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature for mounting/handling -20 to 40C in operation DC coil -40 to 50C -40 to 60C -40 to 40C AC coil -40 to 50C -40 to 50C - Category of environmental protection IEC 61810 RTI - dust protected Vibration resistance (functional) 12 g, 30 to 150 Hz Terminal type PCB-THT, plug-in, quick-connect (QC) Cover retention, pull/push force 100/100N Mounting position versions with test button not to be mounted with button on top Weight 81g Resistance to soldering heat THT IEC 60068-2-20 270C/10s Packaging unit 10/25 pcs. 2 02-2019, Rev. 0219 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2015 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company.