CUSTOMER DRAWING
Product Name Product Dimensions Cable Dimensions
B C H E F G D
A1.75 J0.5
20 AWG 22 AWG 24 AWG 26 AWG min min min max min min max
(A0.07) (J0.02)
S02-01-R S02-06-R S02-11-R S02-16-R 16.5 1.90 2.65 8.25 2.65 0.90 0.50 1.90 7.5
(0.650) (0.075) (0.105) (0.325) (0.105) (0.035) (0.020) (0.075) (0.295)
S02-02-R S02-07-R S02-12-R S02-17-R 16.5 2.65 3.68 8.25 3.68 1.40 0.75 2.65 7.5
(0.650) (0.105) (0.145) (0.325) (0.145) (0.055) (0.030) (0.105) (0.295)
S02-03-R S02-08-R S02-13-R S02-18-R 16.5 4.30 5.08 8.25 5.08 2.15 1.25 4.30 7.5
(0.650) (0.170) (0.200) (0.325) (0.200) (0.085) (0.050) (0.170) (0.295)
S02-04-R S02-09-R S02-14-R S02-19-R 19.1 5.95 6.45 8.25 6.45 3.30 1.80 5.95 7.5
(0.750) (0.235) (0.255) (0.325) (0.255) (0.130) (0.070) (0.235) (0.295)
S02-05-R S02-10-R S02-15-R S02-20-R 19.1 7.00 7.60 8.25 7.60 4.30 2.50 7.00 7.5
(0.750) (0.275) (0.300) (0.325) (0.300) (0.170) (0.100) (0.275) (0.295)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: Color change: violet to colorless.
3. MELTABLE RING: Environment resistant thermoplastic. Color: blue.
4. GROUND LEAD: MIL-W-22759/32-AA-90 lead gauge per table.
APPLICATION
1. These parts are designed to provide an environment resistant shield termination on cables meeting the following criteria:
Dimensions: Per table. Jacket rating: 125 C.
Shield plating: Tin or silver. Jacket material: See M83519/2 or consult TE Connectivity.
2. Parts are qualified to M83519/2.
3. For assembly information, refer to Raychem document RCPS-100-70.
For best results, prepare the cable as shown:
TITLE:
Raychem
SOLDERSLEEVE* SHIELD TERMINATOR,
DEVICES
IMMERSION RESISTANT, MIL-S-83519/2
DOCUMENT NO.:
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
S02-XX-R
TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to
0.00 N/A amend this drawing at any time. Users
REV : DATE :
0.0 N/A ROUGHNESS IN should evaluate the suitability of the
5 30-Mar-2020
0 N/A MICRON product for their application.
PREPARED BY: CAGE CODE: ECO: SCALE: SIZE: SHEET:
M. FORONDA 06090 ECO-20-004510 NTS A 1 of 1
2020 TE Connectivity Ltd. Family of Companies. All Rights Reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
*TE Connectivity, TE connectivity (logo), Raychem, SolderSleeve are trademarks X-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for Solder Sleeves & Shield Tubing category:
Click to view products by TE Connectivity manufacturer:
Other Similar products are found below :
D-260-C-A 899170-000 620040N001 620069N003 620263N004 CTA-0050-01 629624-000 6501390002 CX0781-000 CX0782-000
696396-000 697080-000 715325N001 FLX40-030-02-CS8652 D-436-38CS2908 CB0213-000 CB0219-000 274384-000 285343-000
970053-000 ST18-2-00 FLX40-020-04-CS8651 317035-000 325534-000 D-100-00-WOTI D-150-1011 395947-000 427243N001 C03534-
000 CB0220-000 D44133N001 477436-000 451893-000 931289-000 162583-000 585769N001 610001N004 6200060004 622041N003
626167-000 EG3678-000 650075N002 6500820003 6500850004 650126N010 650127N005 146201-000 7400720001 CA3200N001 82-A2