931289N001 TE Connectivity

CUSTOMER DRAWING Product Dimensions Product Mark A1.75 B C Name A0.070 min min SO63-1-9036-22 16.50 1.90 2.65 SO63-1-9036-20 SO631R 0.650 0.075 0.105 SO63-1-9036-18 SO63-2-9036-22 16.50 2.65 3.55 SO63-2-9036-20 SO632R 0.650 0.105 0.145 SO63-2-9036-18 SO63-3-9036-22 16.50 4.30 5.00 SO63-3-9036-20 SO633R 0.650 0.170 0.200 SO63-3-9036-18 SO63-4-9036-22 19.10 5.95 6.50 SO63-4-9036-20 SO634R 0.750 0.235 0.255 SO63-4-9036-18 SO63-5-9036-22 19.10 7.00 7.60 SO63-5-9036-20 SO635R 0.750 0.275 0.300 SO63-5-9036-18 MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. Marked per table. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR RING: SOLDER: TYPE Sn63 per ANSI / J-STD-006. FLUX: TYPE ROL1 per ANSI / J STD-004. TERMAL INDICATOR RING: Fusible alloy with melt point of 221C. 3. MELTABLE RINGS: Environment resistant fluorocarbon-based thermoplastic 4. PRE-INSTALLED LEAD: Raychem 55PC6121-GA. GA=size (AWG) of lead, color: white with 2 black stripes. APPLICATION 1. These parts are designed to provide an environment resistant shield termination on cables, rated for 125 C min. having tin or silver-plated shields, and jackets compatible with the insert material. See M83519/2 or consult TE Connectivity. 2. When properly installed, these parts will meet the performance requirements of Raychem RT-1404 and SAE-AS-83519/2. 3. Part selection: Measure cable jacket diameter at its maximum point. Select the smallest terminator that has a B diameter larger than the cable diameter. 4. Cable is to be stripped to expose 6.0 -7.5mm 0.235-0.295 of shield. 5. Part may be installed using any TE Connectivity-approved convection or infra-red heating tool. Tools must be equipped with a suitable reflector. For detailed assembly instruction see Raychem RCPS-100-70. TE Connectivity, TE connectivity (logo), Raychem, and SolderSleeve are trademarks TITLE: SOLDERSLEEVE DEVICE WITH Raychem PRE-INSTALLED LEAD, IMMERSION RESISTANT Devices . DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. Inches dimensions are shown in brackets SO63-X-9036-GA TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend 0.00 N/A this drawing at any time. Users should Revision: Issue Date: 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for their C March 2020 0 N/A MICRON application. PREPARED BY: DATE: CAGE CODE : SCALE: SIZE: SHEET: ECO: ECO-20-004474 mforonda 06090 --- A 1 of 1 17-Feb-2017 2020 TE Connectivity Corporation. All rights reserved. SolderSleeve is a trademark of Tyco Electronics Corporation If this document is printed it becomes uncontrolled. Check for the latest revision. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder Sleeves & Shield Tubing category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : D-260-C-A 899170-000 620040N001 620069N003 620263N004 CTA-0050-01 629624-000 6501390002 CX0781-000 CX0782-000 696396-000 697080-000 715325N001 FLX40-030-02-CS8652 D-436-38CS2908 CB0213-000 CB0219-000 274384-000 285343-000 970053-000 ST18-2-00 FLX40-020-04-CS8651 317035-000 325534-000 D-100-00-WOTI D-150-1011 395947-000 427243N001 C03534- 000 CB0220-000 D44133N001 477436-000 451893-000 931289-000 162583-000 585769N001 610001N004 6200060004 622041N003 626167-000 EG3678-000 650075N002 6500820003 6500850004 650126N010 650127N005 146201-000 7400720001 CA3200N001 82-A2