B-150-03 TE Connectivity

SPECIFICATION CONTROL DRAWING Product Revision Product Dimensions Cable Dimensions Product Name A B L D E F G H0.5 J0.5 min min max max min min max (H0.020) (J0.020) B-150-03 D 2.5 3.0 24.5 3.0 1.5 1.0 2.5 6.0 7.0 (0.098) (0.118) (0.964) (0.118) (0.059) (0.039) (0.098) (0.236) (0.275) B-150-05 F 4.3 4.8 29.3 4.8 2.0 1.5 4.3 8.0 9.0 (0.169) (0.189) (1.153) (0.189) (0.078) (0.059) (0.169) (0.315) (0.354) B-150-07 F 6.8 7.3 32.5 7.3 3.3 2.8 6.8 10.0 11.0 (0.267) (0.287) (1.279) (0.287) (0.130) (0.110) (0.267) (0.393) (0.433) B-150-11 E 10.8 11.5 35.5 11.5 4.5 4.0 10.8 12.0 13.0 (0.425) (0.452) (1.397) (0.452) (0.177) (0.157) (0.425) (0.472) (0.512) B-150-13 A 13.0 15.1 45.5 15.1 7.0 6.5 13.0 16.0 17.0 (0.512) (0.594) (1.79) (0.594) (0.275) (0.256) (0.512) (0.630) (0.669) B-150-17 A 17.0 19.0 55.5 18.0 9.0 8.0 16.0 21.0 23.0 (0.669) (0.748) (2.165) (0.748) (0.354) (0.315) (0.630) (0.827) (0.905) B-150-23 A 22.5 24.5 80.0 23.5 12.0 11.0 21.5 29.0 31.0 (0.885) (0.964) (3.149) (0.925) (0.472) (0.433) (0.846) (1.142) (1.220) B-150-33 B 33.0 35.0 80.0 34.0 19.0 17.0 32.0 29.0 31.0 (1.299) (1.380) (3.149) (1.338) (0.748) (0.689) (1.259) (1.142) (1.220) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin. 2. SOLDER PREFORM WITH FLUX. SOLDER: TYPE Cd18 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. 3. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic. APPLICATION 1. These controlled soldering devices are designed for termination of a bare or tin plated copper shield on a cable having an insulation rated for at least +85C. 2. Temperature range: -55C to +125C. For installation procedure and application equipment, consult RPIP-688-00. For best results, prepare the cable as shown: * A trademark of TE connectivity. TE Connectivity THERMOFIT TITLE: SOLDERSLEEVE* DEVICE 300 Constitution Drive DEVICES LOW-FIRE-HAZARD SHIELD TERMINATION Menlo Park, CA 94025 LOW TEMPERATURE USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO : B-150-XX INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend DCR NUMBER: REPLACES: 0.00 N/A this drawing at any time. Users should D980574 B150XX 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for 0 N/A MICRON their application. DRAWN BY: DATE: REV. DOC ISSUE: SCALE: SIZE: SHEET: M. FORONDA 06/29/98 SEE TABLE 3 None A 1 of 1 Print Date: 11-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.