CUSTOMER DRAWING Component Dimensions Cable Dimensions Qty: Part Name A B L D E F G J0.5 Item 2 min min max max min min max J0.020 4.3 4.8 29.3 4.8 2.0 1.5 4.3 9.0 B-155-05-100-18-9 1 0169 0.189 1.154 0.189 0.079 0.059 0169 0.354 6.4 7.3 32.5 7.3 3.3 2.8 6.4 11.0 B-155-07-100-18-9 1 0.250 0.290 1.280 0.290 0.130 0.110 0.250 0.435 10.0 11.5 35.5 11.5 4.5 4.0 10.0 13.0 B-155-11-100-18-9 2 0.395 0.450 .395 0.450 0.175 0.155 0.395 0.510 13.0 15.1 45.5 15.1 7.0 6.5 13.0 17.0 B-155-13-100-18-9 3 0.510 0.595 1.790 0.595 0.275 0.255 0.510 0.670 16.5 19.0 55.0 18.0 9.0 8.0 16.0 23.0 B-155-17-100-18-9 2 0.650 0.750 2.165 0.710 0.355 0.315 0.630 0.905 MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin. 2. SOLDER PREFORM WITH FLUX Qty: see table (one solder washer shown). SOLDER: TYPE Sn42Bi58 per ANSI / J-STD-006. FLUX: TYPE ROM1 per ANSI / J-STD-004. 3. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic. 4. GROUND LEAD: Tyco Electronics / Raychem Zerohal 100G0111-18-9 (AWG18), stranded tin-plated copper. Color: white. APPLICATION 1. These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an insulation rated for at least +85 C, and meeting the dimensional criteria listed in the table above. 2. Temperature range: -55 C to +125 C. 3. When installed properly, it will meet the performance requirements of Tyco Electronics / Raychem Specification RT-1404. 4. For installation procedure and application equipment, consult RPIP-688-01. For best results, prepare the cable as shown: TE Connectivity, TE connectivity (logo), Raychem, and SolderSleeve are trademarks TITLE: SOLDERSLEEVE SHIELD TERMINATOR, Raychem LEAD-FREE LOW-FIRE-HAZARD WITH PRE-INSTALLED LEAD DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. Inches dimensions are shown in brackets B-155-XX-100-18-9 TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend 0.00 N/A this drawing at any time. Users should Revision: Issue Date : 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for their April 2020 0 N/A MICRON application. 2 PREPARED BY: CAGE CODE : DATE: SCALE: SIZE: SHEET: ECO: ECO-20-005386 mforonda 06090 --- A 1 of 1 30-Jun-05 Print Date: 17-Apr-20 2020 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder Sleeves & Shield Tubing category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : 899170-000 620040N001 620069N003 CTA-0050-01 629624-000 6500750004 6501390002 CX0781-000 696396-000 697080-000 D-150- 0331CS2902 D-181-1222-90/9CS2800 D-300-01CS1108 715325N001 908357N001 982127-1 D-436-0182CS246 D-436-37CS2651 D-436- 61CS246 D-436-82-CS2621 D-659-0087 E53797N001 CB0213-000 CB0219-000 S200-2-01 S200-4-00CS2904 LSS-81-16AA-CS5575 ST18-2-00 FLX40-020-04-CS8651 325534-000 CTA-0025 D-108-07CS436 D-128-0010 D-141-0108CS404 D-144-41CS1371 D-150-0231- NRCS2896 D-150-1011 395947-000 427243N001 B-801-18-01 515-9 C67137-000 CB0220-000 D-436-0185CS1102 D-436-36CS2908 D- 436-37CS2908 D-436-52CS246 D-436-83CS2705 D44133N001 LSS-26-8A