SPECIFICATION CONTROL DRAWING Product Rev Product Dimensions Cable Dimensions Product L A F M N E Name max min min min max 2.40 (0.094) 93.00 5.50 2.40 15.00 83.00 B-600-31 N/C to (3.660) (0.217) (0.094) (0.590) (3.270) 3.80 (0.150) 3.40 (0.134) 93.00 7.00 3.50 15.00 83.00 B-600-32 N/C to (3.660) (0.276) (0.137) (0.590) (3.270) 5.00 (0.197) 4.50 (0.177) 108.00 9.00 4.50 15.00 83.00 B-600-33 N/C to (4.250) (0.354) (0.177) (0.590) (3.270) 7.00 (0.276) 6.50 (0.256) 108.00 11.00 6.50 15.00 83.00 B-600-34 N/C to (4.250) (0.433) (0.256) (0.590) (3.270) 9.50 (0.374) 9.00 (354) 108.00 13.50 9.00 15.00 83.00 B-600-35 N/C to (4.250) (0.531) (0.354) (0.590) (3.270) 12.70 (0.500) MATERIALS 1 INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SHIELD: Tin plated copper braid, fluxed and tinned at both ends. 3. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI/J-STD-006. FLUX: TYPE ROM1 per ANSI/J-STD-004. APPLICATION 1. These parts are designed to provide an in-line splice between the shield of cables, rated for 135C minimum, meeting the dimensional criteria listed, having tin or silver-plated copper shields. 2. Temperature range: -55C to +150C. 3. Install using Tyco Electronics/Raychem-approved convection or infrared heating tools. For best results, prepare the cable as shown: Tyco Electronics Corporation Title: 300 Constitutional Drive SOLDERSHIELF SPLICE KIT, Menlo Park, CA 94025 USA FLEXIBLE, SINGLE SHIELD Tyco Electronics reserves the right to amend this drawing at any Document No. time. Users should evaluate the suitability of the product for their application B-600-3X UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN Rev.: Rev. Date: MILLIMETERS. 1 13-Jun-03 INCH DIMENSIONS ARE SHOWN IN BRACKETS DRAWN BY: CAGE CODE: Org. Date: File name: SCALE: SIZE: SHEET: mforonda 06090 13-Jun-03 D030317 None A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision.