B-801-08 TE Connectivity

SPECIFICATION CONTROL DRAWING Product Revision Product Name D X B-801-06 G 0.68 0.8 B-801-08 F 0.88 1 MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. 3. PIN: Phosphor bronze coated with Sn60 Pb40 solder alloy. APPLICATION 1. These controlled soldering devices are designed for termination of a tin or silver plated stranded AWG26, AWG24 and AWG22 conductor having an insulation rated for at least +125C on a PC board with X diameter hole. If AWG20 wire is used, pre-tinning is recommended. 2. Temperature range: -55C to +150C. For application tooling, contact your local Raychem technical service. For best results, prepare the wire as shown: * A trademark of Raychem Corporation. TITLE: Raychem Corporation THERMOFIT 300 Constitution Drive PINPAK* DEVICE FOR PCB DEVICES Menlo Park, CA 94025 TERMINATION USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO.: B-801-0X INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A Raychem reserves the right to amend this DCR NUMBER: REPLACES: 0.00 N/A drawing at any time. Users should evaluate D990184 D980896 0.0 N/A ROUGHNESS IN the suitability of the product for their 0 N/A MICRON application. DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: SIZE: SHEET: M. FORONDA 03/22/99 SEE TABLE 2 None A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision.