ASSY USED ON:
BAND (SUPPLIED FLAT) 3 8
(SEE PART NUMBER BREAKDOWN
FOR OPTIONS)
CODE 40 - BANDING BACKSHELL
BNX40AB00-1608 -S
SERIES
BNX - BAND STRAP NOT INCLUDED
BND - BAND STRAP INCLUDED
(SEE BAND TERMINATION
CONFIGURATION)
CONNECTOR INTERFACE
MATERIAL
REFER TO CH00-0250-016
FINISH
REFER TO CH00-0250-016
ANGLE
ORDER NUMBER (TABLE 1)
ENTRY SIZE (TABLE 2)
BAND TERMINATION CONFIGURATION 3 8
V - ONE STEP STANDARD BAND
W - ONE STEP MICROBAND
U - TWO STEP STANDARD BAND
FOR BNX, LEAVE BLANK
OPTION FIELD SEPARATOR
MODIFICATION CODE
REFER TO CH00-0250-016 2
NOTES:
1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD BY MEANS
OF A BAND STRAP AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR.
2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS,
SEE CH00-0250-016.
3. SEE DRAWING BND-XXXXX FOR MORE INFORMATION.
4. BACKSHELL TO BE PERMANENTLY MARKED WITH CODE IDENTIFICATION NUMBER AND FULL BASIC
PART NUMBER (e.g. 06090-BND40AB00-1814). BACKSHELL TO BE MARKED WITHBN EVEN IF
NO BAND IS ORDERED. THE BAND TERMINATION CONFIGURATION CODE IS FOR ORDERING INFORMATION ONLY
AND IS NOT A PART MARKING REQUIREMENT.
5. ALL ENTRY SIZES ARE SHOWN IN TABLE 2. MAXIMUM ENTRY SIZES ARE SHOWN IN TABLE 1.
IF MAX ENTRY IS EXCEEDED, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED.
SEE CH00-0250-016 FOR FURTHER DETAILS.
6. BACKSHELL MATES TO MIL-DTL-38999, SERIES III AND IV, CLASS C, F, K, AND W,
D38999/20, /24, /26, /40, /46 AND /47 CONNECTORS, AND WHEN SO
MATED SHALL PROVIDE A WATER-TIGHT SEAL MEETING THE REQUIREMENTS OF
MIL-C-85049, PARA. 3. 5. 7.
7. THESE DIMENSIONS APPLY IF A SELF-LOCKING COUPLING NUT IS USED
8. V AND U BANDS ARE SUITABLE FOR ENTRY SIZES 03-24, W IS SUITABLE FOR ENTRY SIZES 03-12 ONLY.
CONTACT FACTORY FOR BAND OPTIONS ON LARGER ENTRY SIZES.
DATE
3RD ANGLE
K.WINCZURA
DRAWN
PROJECTION TITLE:
15/09/2015
NOT TO
CHECKED 15/09/2015 SCALE
BANDING BACKSHELL
UNLESS OTHERWISE SPECIFIED
APPROVED K.SHEPPARD 15/09/2015
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
APPROVED H.SMITH 15/09/2015
ANGULAR +/- 1
REVISIONS
LTR DATE APPROVED
DESCRIPTION
MIL-DTL-38999 SERIES III & IV
F 15/09/2015 H.SMITH
REVISED PER ECO-15-010973
G REVISED PER ECO-15-016545 17/11/2015
H.SMITH
TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING DRAWING NO: DRAWING REV: SHT
TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
BND40A G 1
POLAMCO/TE CAGE CODE: U5792G
D
ASSY USED ON:
IF MAX ENTRY IS EXCEEDED BACKSHELL
WILL BE SUPPLIED AS TYPE 2
30,00
16,80`0,50 30,00
18,00
SILICONE
O-RING 3,50
13,00
PART MARK
5
HERE
PART MARK
STRAIGHT BACKSHELL - TYPE 2
STRAIGHT BACKSHELL - TYPE 1
HERE
C
16,80`0,50 F
45 BACKSHELL - TYPE 1 45 BACKSHELL - TYPE 2
W H
16,80`0,50
T M
90 BACKSHELL - TYPE 1
90 BACKSHELL - TYPE 2
H
W
16,80`0,50
T
M
90 BACKSHELL - TYPE 1
90 BACKSHELL - TYPE 2
STAINLESS STEEL AND
STAINLESS STEEL AND
NICKEL ALUMINIUM BRONZE
NICKEL ALUMINIUM BRONZE
DATE
3RD ANGLE
K.WINCZURA
DRAWN
PROJECTION TITLE:
15/09/2015
NOT TO
CHECKED 15/09/2015 SCALE
BANDING BACKSHELL
UNLESS OTHERWISE SPECIFIED
APPROVED K.SHEPPARD 15/09/2015
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
APPROVED H.SMITH 15/09/2015
ANGULAR +/- 1
REVISIONS
LTR DATE APPROVED
DESCRIPTION
MIL-DTL-38999 SERIES III & IV
F 15/09/2015 H.SMITH
REVISED PER ECO-15-010973
G REVISED PER ECO-15-016545 17/11/2015
H.SMITH
TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING DRAWING NO: DRAWING REV: SHT
TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
BND40A G 2
POLAMCO/TE CAGE CODE: U5792
B
A THREAD
XXXX
E
Z
S
Y
E
K
B
A THREAD
XXXX
J
J