SPECIFICATION CONTROL DRAWING C5E-24C424-B24 Date: 5/18/2020 Issue: D CAT5e CABLE, AWG 24 Page 1 of 2 THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS TABLE II Conductor Pair Component Dimensions 1 Insulation inches (nom) AWG 24 19/36, SPHSCA Conductor: .0235 Pair 2 4 Insulation: Foamed FEP .0460 Cable Assembly Inner Shield 3 Core: 4 Pairs .200 Inner Shield Aluminum/Polyimide, .004 inch thick, .208 Outer shield Al facing out. Outer Shield: AWG 38, silver-coated copper .225 Jacket Jacket: FEP, .015 inch thickness .255 + .033 TABLE I - Color Coding Cable Weight: 42.90 lbs/kft Pair Conductor 1 Conductor 2 Designate outer jacket color with a dash number appended to the part number. Example: Clear jacket C5E-24C424-B24-X 1 9 (white) 6L (light blue) 2 9 (white) 3L (light orange) Color code designators shall be in accordance with MIL-STD-681. An L after the number indicates a light color. 3 9 (white) 5L (light green) 4 9 (white) 1L (light brown) ELECTRICAL CHARACTERISTICS TABLE III Frequency Insertion Loss Return Loss NEXT ACRF PS NEXT PSACRF Propagation Delay MHz dB/100m dB/100m dB/100m dB/100m dB/100m dB/100m ns/100m (nom/max) (min) (min) (min) (min) (min) (max) 1 2.4/2.64 20.0 65.3 63.8 62.3 60.8 570 4 4.9/5.4 23.0 56.3 51.8 53.3 48.8 552 8 6.9/7.6 24.5 51.8 45.7 48.8 42.7 547 10 7.8/8.6 25.0 50.3 43.8 47.3 40.8 545 16 9.9/10.9 25.0 47.3 39.7 44.3 36.7 543 20 11.1/12.2 25.0 45.8 37.8 42.8 34.8 542 25 12.5/13.8 24.2 44.3 35.8 41.3 32.8 541 31.25 14.1/15.5 23.3 42.9 33.9 39.9 30.9 540 62.5 20.4/22.4 20.7 38.4 27.9 35.4 24.9 539 100 26.4/29.0 19.0 35.3 23.8 32.3 20.8 538 Note: Values in Table III for RL and NEXT are for reference only. Actual values shall be determined utilizing the formulas in ANSI/TIA-568 2 Issue in e ect Electrical Testing: In accordance with ANSI/TIA-568.2 Issue in e ect. Capacitance: Mutual Capacitance: 5.6 nF/100 m (nom) at 1 kHz Pair to ground capacitance unbalance: 330 pF/100 m (max) at 1 kHz. Impedance: 100 15 ohms at 1 to 100 MHz. (for reference only). Delay Skew: 45 ns/100 meter (maximum) at 1 to 100 MHz. Velocity of Propagation: 76% (nominal) Other codes and su xes may be added to the part number, as necessary, to capture any additional requirements imposed TE Connectivity Corporation by the purchase order. Users should evaluate the suitability of this product for their application. TE Connectivity Raychem Wire & Cable Corporation also reserves the right to make changes in materials or processing, which do not a ect compliance with any 501 Oakside Avenue speci cation, without noti cation to Buyer. Redwood City, California 94063-3800 This speci cation sheet takes precedence over documents referenced herein. Referenced documents shall be of the issue 1-800-522-6752 in e ect on date of invitation for bid. Raychem, TE connectivity (logo) and TE (logo) are trademarks. 2020 TE Connectivity Corporation. All rights reserved.SPECIFICATION CONTROL DRAWING C5E-24C424-B24 Date: 5/18/2020 Issue: D Page 2 of 2 ADDITIONAL REQUIREMENTS & RATINGS Temperature Rating: -65C to +200C Voltage Withstand: 1000 volts (rms), conductor to conductor and shield. 500 volts (rms) shield to shield when applicable per NEMA WC 27500. Flammability: Shall meet the requirements of FAR Part 25.869 (a) (4) Appendix F, Part I (a) (3) when tested in accordance with Appendix F Part I (b) (7) Shield Coverage: 90% minimum Jacket Tensile Strength: 2000 psi minimum Jacket Elongation: 200% minimum Jacket Flaws: Spark Test: 1 kV (rms) Impulse Dielectric Test: 6.0 kV (peak) Testing: This cable is to be tested in accordance with Spec1200 as applicable. Cable will be supplied in 50 ft minimum lengths unless otherwise speci ed. TE Connectivity Corporation Raychem Wire & Cable 501 Oakside Avenue Redwood City, California 94063-3800 1-800-522-6752