CUSTOMER DRAWING
1
3 2 3
4
Product Dimensions Cable Dimensions
Color
Product Ident.
Code
L1.75 B C D E F G
Name Code
(CL)
[L0.075] min min max max min min
16.50 1.90 2.67 1.90 2.67 0.90 0.50
S200-1-W2-GA-CL S2001R 9
[0.650] [0.075] [0.105] [0.075] [0.105] [0.035] [0.020]
16.50 2.67 3.68 2.67 3.68 1.40 0.75
S200-2-W2-GA-CL S2002R 9
[0.650] [0.105] [0.145] [0.105] [0.145] [0.055] [0.030
16.50 4.32 5.08 4.32 5.08 2.15 1.25
S200-3-W2-GA-CL S2003R 9
[0.650] [0.170] [0.200] [0.170] [0.200] [0.085] [0.050]
19.10 5.97 6.48 5.97 6.48 3.30 1.80
S200-4-W2-GA-CL S2004R 9
[0.750] [0.235] [0.255] [0.235] [0.255] [0.130] [0.070]
19.10 6.98 7.62 6.98 7.62 4.30 2.50
S200-5-W2-GA-CL S2005R 9
[0.750] [0.275] [0.300] [0.275] [0.300] [0.170] [0.100]
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn96 per ANSI / J-STD-006.
FLUX: TYPE ROM1 per ANSI / J-STD-004.
THERMAL INDICATOR: Fusible ring.
3. MELTABLE RINGS: Environment resistant modified thermoplastic fluoropolymer. Color: light blue.
4. PRE-INSTALLED LEAD: Stranded nickel-plated copper wire in accordance with SAE-AS22759/87. Color: see table.
APPLICATION
1. These parts are designed to provide an environment resistant shield termination on cables, rated for 150 C minimum, meeting the
dimensional criteria listed, having silver or nickel-plated shields and insulations compatible with the insert material.
2. Install using TE Connectivity-approved convection or infrared heating tools in accordance with TE Connectivity process standard
RCPS-100-71. When installed with approved convection or infrared heating tools, assemblies will meet the performance
requirements of SAE AS83519. Infrared tools are not recommended for use with black cable jackets.
3. Parts shall be marked with identification code per table.
4. Temperature range: -65 C to +200 C.
5. For best results, prepare the cable as shown:
Part Number Guide:
S200-X-W2-GA-CL
Lead color per MIL-STD-681
Lead AWG. Check for availability.
Lead type AS22759/87 (RCW5987)
Size 1 to 5 G is the minimum diameter on which the sleeve will seal.
TE Connectivity, TE connectivity (logo), Raychem, and SolderSleeve are trademarks
TITLE:
SOLDERSLEEVE SHIELD TERMINATOR WITH LEADS,
IMMERSION RESISTANT, 200 DEG C,
ROHS COMPLIANT
Unless otherwise specified dimensions are in millimeters. DOCUMENT NO.:
Raychem
[Inches dimensions are shown in brackets]
Devices
S200-X-W2-GA-CL
TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to
0.00 N/A amend this drawing at any time.
Revision : Issue Date :
0.0 N/A ROUGHNESS Users should evaluate the suitability
April 2020
0 N/A IN MICRON of the product for their application.
D
DRAWN BY: CAGE CODE: DATE: SCALE: SIZE: SHEET:
ECO: ECO-20-004961
P.TALLY 06090 NTS A 1 of 1
April 16, 2020
2020 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision. X-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for TE Connectivity manufacturer:
Other Similar products are found below :
D38999/24FJ4AN 570416-000 CLTEQ-M81CE-SSRELAY-4-20V 4-1195131-0 650069-000 SMD100-2 358838-000 CB-1022B-78
RM707012 RP410012 MMS42 1-640426-8 2EDL4CM DTS20W19-11PD-3028-LC RM202615 NC6-P104-06 MSPS103B DTS26F21-
41HE-LC DTS26F21-41AE DTS26F21-41PE-LC DTS26F21-11SE-3028-LC 30DCB6 1932144-1 293545-4 LVR125S MS27466T25F4PB
CKB-38-78010 TR04AI-TINELLOCKRING 1206SFF150F/63-2 D38999/20JB35HA TE1500A2R2J D38999/20WC8BB DTS24F19-11SC-
3028-LC D38999/24WG11HA D38999/24WG11HN MS27467T21F11H DJT16E21-11HA MS27467T21F35J MS27467T21F11J
MS27467T21F16H-LC MS27467T21F35H MS27467T21F41H-LC 1206SFH150F/24-2 RP330024 DJT16E21-11PA-LC DJT16E21-11HA-
LC DJT16E21-11AA MS27467T21B11JA DJT16E21-11JA MS27467T21B11JA-LC