CUSTOMER DRAWING TABLE 1 Product Component Dimensions Gauge Quantity/Kit Name A B C D E F G H Size Range Item Item 4/ MIN MIN REF MIN MAX MIN MIN MIN (AWG) 3 Color Code 4.00 5.95 88.90 2.16 13.00 5.70 1.90 1.20 1 D-150-20 20 - 26 1 (0.157) (0.234) (3.500) (0.085) (0.512) (0.224) (0.075) (0.047) Red 2.16 13.00 5.70 1.90 1.20 3 20 - 26 3 6.85 8.00 84.00 (0.085) (0.512) (0.224) (0.075) (0.047) Red D-150-21 (0.270) (0.315) (3.307) 2.80 14.85 6.60 2.55 1.65 1 16 - 18 1 (0.110) (0.585) (0.260) (0.100) (0.065) Blue 2.75 8.70 89.00 2.16 13.00 5.70 1.90 1.20 4 D-150-22 20 - 26 4 (0.108) (0.343) (3.504) (0.085) (0.512) (0.224) (0.075) (0.047) Red 9.40 10.72 76.20 2.80 14.85 6.60 2.55 1.65 4 D-150-24 16 - 18 4 (0.370) (0.422) (3.000) (0.110) (0.585) (0.260) (0.100) (0.065) Blue TE Connectivity, TE connectivity (logo), and Raychem are trademarks TITLE: SPLICING KIT - SHIELDED CABLE Unless otherwise specified dimensions are in millimeters. DOCUMENT NO.: Inches dimensions are shown in brackets Raychem DIMENSIONING AND TOLERANCING PER ASME Devices D-150-20/-21/-22/-24 Y14.5-2009 TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend this 0.00 N/A drawing at any time. Users should evaluate the Revision: Issue Date: 0.0 N/A ROUGHNESS suitability of the product for their application. D4 March 2020 0 N/A IN MICRON REVISED BY: CAGE CODE: SCALE: SIZE: SHEET: ECO: ECO-20-003572 T. NGUYEN 06090 NTS A1 1 of 3 2003-2020 TE Connectivity Corporation. All rights reserved. MATERIALS 1. SOLDERSLEEVE: INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL0 per ANSI-J-STD-004. MELTABLE RINGS: Environment resistant fluorocarbon. Color: Natural. 2. JUMPER BRAID: Tin plated copper wires. 3. SEALING SLEEVE: Heat-shrinkable, transparent blue, with immersion resistant, thermoplastic sealing rings, 4. CRIMP SPLICE: Tin plated copper alloy. BASE METAL: Copper alloy 101 or 102 per ASTM B-75. PLATING: Tin per ASTM-B545 and ASTM-B339. APPLICATION 1. These kits are used to provide a shielded immersion resistant in-line splices in shielded cables when installed as outlined herein, rated for at least 125 C minimum. 2. Temperature range: -55 C to +150 C. INSTALLATION PROCEDURE 1. Cable Preparation. Strip the cables as shown: (Single conductor shown for clarity) TABLE 2 Cable Dimensions Part Gauge (AWG) D F Number Name max min of conductors Min Max 4.00 0.650 D-150-20 26 20 1 (0.157) (0.026) 6.85 0.650 D-150-21 26 20 2 or 3 (0.270) (0.026) 6.85 0.650 18 16 1 (0.270) (0.026) 7.25 0.650 D-150-22 24 20 4 (0.285) (0.026) 9.40 0.650 D-150-24 18 16 4 (0.370) (0.026) DOCUMENT NO. REV: DATE: SHEET: D4 January 07, 2020 2 of 3 D-150-20/-21/-22/-24