CUSTOMER DRAWING XY = WIRE GAUGE (AWG) Product Revision Product Dimensions Product Name A B C D E F L1 L2 K AWG min min min min min min max max min D-181-3220-90/9 F 20 D-181-3222-90/9 F 5.20 4.70 4.45 3.95 4.00 1.30 17.00 21.5 150.0 22 D-181-3224-90/9 F .205 .185 .175 .155 .157 .051 .669 .85 5.90 24 D-181-3226-90/9 F 26 MATERIALS 1. INSULATION SLEEVES: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORMS WITH FLUX: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. 3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: gray. 4. GROUND LEAD: Raychem 55A0111-XY in accordance with MIL-W-22759/32, AWG XY (see table), stranded tin plated. Color: white. 5. GROUND LEAD: Raychem 55A0111-XY in accordance with MIL-W-22759/32, AWG XY (see table), stranded tin plated. Color: white with black strip. APPLICATION 1. These parts are designed to provide an environment protected coaxial termination on cables, rated for 125C minimum, meeting the dimensional criteria listed, and having a tin or silverplated shields. 2. Temperature range: -55C to +150C. Install using Raychem-approved convection or infrared heating tools in accordance with Raychem process standard RCPS-200-36. For best results, prepare the cable as shown: NOTE: For best result, prepare the cable as illustrated above. TITLE: COAXIAL SOLDERSLEEVE DEVICE Raychem Devices WITH PRE-INSTALLED LEAD UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO.: D-181-32XX-90/9 INCHES DIMENSIONS ARE BETWEEN .xxx BRACKETS. TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to amend DATE: REVISED PER: 0.00 N/A this drawing at any time. Users should June 12, 2015 ECO-15-008855 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for their 0 N/A MICRON application. DRAWN BY: CAGE CODE: CAD NAME: PROD. REV.: REVISION: SIZE: SHEET: M. FORONDA 06090 D-181-32XX-90 9.doc SEE TABLE C1 A 1 of 1 2015 TE CONNECTIVITY LTD. FAMILY OF COMPANIES. ALL RIGHT RESERVED. If this document is printed it becomes uncontrolled. Check for the latest revision.