CUSTOMER DRAWING SOLDERSHIELD SPLICE SLEEVE CRIMP SPLICE SEALING SLEEVE Product Dimensions Primary AWG Color Part Names L Max D1 D2 D3 D4 A2.54 No. Range Code (0.100) D-200-0228 1 26-20 Red 80.52 (3.170) 50.30 (1.970) 4.29 (0.169) 3.00 (0.118) 1.14 (0.045) 2.79 (0.110) D-200-0229 1 20-16 Blue 80.52 (3.170) 50.30 (1.970) 5.50 (0.217) 4.00 (0.157) 1.63 (0.064) 4.00 (0.157) D-200-0230 1 16-12 Yellow 80.52 (3.170) 50.30 (1.970) 6.50 (0.256) 5.00 (0.197) 2.46 (0.097) 4.32 (0.170) D-200-0231 2 26-20 Red 105.92 (4.170) 74.93 (2.950) 5.50 (0.217) 4.00 (0.157) 1.14 (0.045) 2.16 (0.085) D-200-0232 2 18-16 Blue 105.92 (4.170) 74.93 (2.950) 6.50 (0.256) 5.00 (0.197) 1.63 (0.064) 2.79 (0.110) D-200-0233 2 14 Yellow 105.92 (4.170) 74.93 (2.950) 7.50 (0.295) 6.00 (0.236) 2.46 (0.097) 4.32 (0.170) D-200-0234 2 12 Yellow 105.92 (4.170) 74.93 (2.950) 10.50 (0.413) 9.04 (0.356) 2.46 (0.097) 4.32 (0.170) D-200-0236 3/4 22-20 Red 105.92 (4.170) 74.93 (2.950) 6.50 (0.256) 5.00 (0.197) 1.14 (0.045) 2.16 (0.085) D-200-0237 3/4 18-16 Blue 105.92 (4.170) 74.93 (2.950) 7.50 (0.295) 6.00 (0.236) 1.63 (0.064) 2.79 (0.110) D-200-0238 3/4 14-12 Yellow 108.00 (4.250) 74.93 (2.950) 10.50 (0.413) 9.04 (0.356) 2.46 (0.097) 4.32 (0.170) D-200-0239 3/4 18-16 Blue 108.00 (4.250) 74.93 (2.950) 10.50 (0.413) 9.04 (0.356) 1.63 (0.064) 4.32 (0.170) MATERIALS 1. SOLDERSHIELD SPLICE SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer, containing two environment resistant sealing rings and a solder impregnated, flux-coated copper-wire braid. Transparent blue. SOLDER: TYPE Sn96 per ANSI J-STD-006. FLUX: TYPE ROM1 per ANSI J-STD-004. 2. CRIMP SPLICE (1, 2, OR 4 PER KIT): Nickel-plated copper alloy. 3. SEALING SPLICE SLEEVE (1, 2, OR 4 PER KIT): Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer, containing two environment resistant sealing rings. Transparent blue. APPLICATION 1. These kits are designed to make an environment-resistant, 1 to 1 in-line splice in shielded single, twisted pair, trio and quad cables having nickel-plated conductors and insulations rated for 150C minimum. 2. Temperature rating: -55C to +200C. 3. For installation procedures refer to the applicable sections of Raychem Process Standard RCPS 150-05. TITLE: 300 Constitution Dr 1 TO 1 SPLICES CRIMP, SOLDERSHIELD Menlo Park, CA SPLICE KIT, SHIELDED CABLE 26 THRU 12 94025, U.S.A. AWG, Ni PLATED, 1 TO 4 CONDUCTORS Unless otherwise specified dimensions are in DOCUMENT NO.: Raychem millimeters. D-200-02XX Devices Inches dimensions are shown in brackets TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to 0.00 N/A amend this drawing at any time. Users REV: DATE: 0.0 N/A ROUGHNESS should evaluate the suitability of the F June 21, 2010 0 N/A IN MICRON product for their application. PREPARED BY: CAGE CODE: ECO NUMBER: SCALE: SIZE: SHEET: UNGUYEN 06090 ECO-10-014788 NTS A 1 of 1 2009-2010 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder & Shield Tubing category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : CTC-0062-20-9/5-9 CTC-0062-22-9/5-9 650076N001 680441-000 D-150-0331CS2902 D-181-1222-90/9CS2800 D-300-01CS1108 982127- 1 D-436-0127CS391 D-436-0182CS246 D-436-37CS2651 D-436-58CS246 D-436-61CS246 D-436-82-CS2621 D-659-0087 D-750- 0005CS2493 E53797N001 S200-2-01 S200-4-00CS2904 LSS-81-16AA-CS5575 SO63-2-9036-22CS2677 SO63-3-01CS293 SO63-3-9036- 20CS2677 SO63-3-9036-22CS2677 SO63-4-9036-20CS2677 SO63-5-9036-22CS2677 CC1525-000 CTA-0025 CTA-0025CS072 D-108- 01CS227 D-108-07CS436 D-128-0010 D-141-0108CS404 D-142-51-202-7754 D-144-41CS1371 D-150-0231-NRCS2896 B-801-18-01 B- 801-58 515-9 D-436-36CS2908 D-436-37CS2908 D-436-52CS246 D-436-83CS2705 D-438-0102 LSS-26-8A 427243-000 D-106-2012 D- 300-08CS1108 UWCS-2U/7.6-1C/5.8 620026-000