CUSTOMER DRAWING L1 D1 1) OUTER SEALING SLEEVE, Qty/kit: 1 L3 L2 D3 D2 2) JUMPER BRAID, Qty/kit: 1 3) SOLDERSLEEVE, Qty: 2 L5 L6 D6 D7 D5 4) CRIMP, Qty: See Table 5) SEALING SLEEVE, Qty: See Table 6) MELTABLE INSERT, Qty: See Table OUTER INSULATION SLEEVE, JUMPER BRAID, AND SOLDERSLEEVE DIMENSIONS L1 L2 L3 D1 D2 D3 Part Description Max Min Max Min Min Min D-200-0228-RT 120.6 (4.750) 65.0 (2.559) 17.25 (0.680) 5.0 (0.197) 5.08 (0.200) 4.45 (0.175) D-200-0230-RT 120.6 (4.750) 65.0 (2.559) 17.25 (0.680) 5.0 (0.197) 5.08 (0.200) 4.45 (0.175) D-200-0231-RT 120.6 (4.750) 65.0 (2.559) 17.25 (0.680) 5.0 (0.197) 5.08 (0.200) 4.45 (0.175) D-200-0232-RT 120.6 (4.750) 65.0 (2.559) 20.50 (0.810) 6.5 (0.255) 6.35 (0.250) 5.95 (0.235) D-200-0233-RT 150.0 (5.905) 85.0 (3.346) 20.50 (0.810) 6.5 (0.255) 6.35 (0.250) 5.95 (0.235) D-200-0234-RT 150.0 (5.905) 85.0 (3.346) 20.50 (0.810) 6.5 (0.255) 6.35 (0.250) 5.95 (0.235) D-200-0235-RT 150.0 (5.905) 85.0 (3.346) 20.50 (0.810) 6.5 (0.255) 8.51 (0.335) 7.10 (0.280) D-200-0236-RT 150.0 (5.905) 85.0 (3.346) 20.50 (0.810) 8.9 (0.350) 8.51 (0.335) 7.10 (0.280) D-200-0237-RT 150.0 (5.905) 85.0 (3.346) 20.50 (0.810) 8.9 (0.350) 8.51 (0.335) 7.10 (0.280) D-200-0238-RT 150.0 (5.905) 85.0 (3.346) 31.00 (1.220) 12.7 (0.500) 9.65 (0.380) 8.75 (0.345) D-200-0239-RT 150.0 (5.905) 85.0 (3.346) 20.50 (0.810) 6.5 (0.255) 8.51 (0.335) 7.10 (0.280) D-200-0241-RT 150.0 (5.905) 85.0 (3.346) 31.00 (1.220) 12.7 (0.500) 9.65 (0.380) 8.75 (0.345) D-200-0242-RT 120.6 (4.750) 65.0 (2.559) 20.50 (0.810) 6.5 (0.255) 6.35 (0.250) 5.95 (0.235) D-200-0243-RT 150.0 (5.905) 85.0 (3.346) 31.00 (1.220) 12.7 (0.500) 10.80 (0.425) 10.80 (0.425) D-200-0252-RT 150.0 (5.905) 85.0 (3.346) 31.00 (1.220) 12.7 (0.500) 10.80 (0.425) 10.80 (0.425) TITLE: 1 TO 1, 1 TO 2, 2 TO 2 SPLICES CRIMP, FLEXIBLE SHIELD SPLICE KIT, SHIELDED CABLE 26 THRU 10 AWG, Ni PLATED Unless otherwise specified dimensions are in millimeters. DOCUMENT NO.: Raychem Inches dimensions are shown in brackets Devices D-200-02XX-RT TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to 0.00 N/A amend this drawing at any time. Users REV: DATE: 0.0 N/A ROUGHNESS should evaluate the suitability of the G4 April 4, 2018 0 N/A IN MICRON product for their application. PREPARED BY: CAGE CODE: REVISED PER. SCALE: SIZE: SHEET: AREY 06090 ECO-18-005120 DO NOT SCALE A 1 of 2 2015-2018 TE CONNECTIVITY CORP. ALL RIGHTS RESERVED. If this document is printed it becomes uncontrolled. Check for the latest revision. CUSTOMER DRAWING INNER SEALING SLEEVE, CRIMP SPLICE, AND SEALING RINGS DIMENSIONS Crimp & Meltable Conductor Color L5 1.27 L6 0.25 D5 D6 D7 0.12 Part Description Sleeve Qty Insert Qty Wire Size* or Code Min Ref (0.050) (0.010) (0.005) ( Items 4 &5 ) (Item 6) CMA Range 26-20* 27.94 12.70 2.15 1.14 D-200-0228-RT 1 0 Red N/A 305 1,510 (1.100) (0.500) (0.085) (0.045) 20-16* 27.94 14.60 2.80 1.63 D-200-0230-RT 1 0 Blue N/A 779 2,680 (1.100) (0.575) (0.110) (0.064) 16-12* 27.94 14.60 4.32 2.46 D-200-0231-RT 1 0 Yellow N/A 1,900 6,755 (1.100) (0.575) (0.170) (0.097) 16-12* 27.94 14.60 4.32 2.46 D-200-0232-RT 1 0 Yellow N/A 1,900 6,755 (1.100) (0.575) (0.170) (0.097) 27.94 12.70 2.15 1.14 2.87 D-200-0233-RT 2 2 Red 305 1,510 (1.100) (0.500) (0.085) (0.045) (0.113) 27.94 14.60 2.80 1.63 2.87 D-200-0234-RT 2 2 Blue 779 2,680 (1.100) (0.575) (0.110) (0.064) (0.113) 27.94 14.60 4.32 2.46 3.81 D-200-0235-RT 2 2 Yellow 1,900 6,755 (1.100) (0.575) (0.170) (0.097) (0.150) 27.94 12.70 2.15 1.14 3.81 D-200-0236-RT 2 2 Red 305 1,510 (1.100) (0.500) (0.085) (0.045) (0.150) 27.94 14.60 2.80 1.63 3.81 D-200-0237-RT 3 2 Blue 779 2,680 (1.100) (0.575) (0.110) (0.064) (0.150) 27.94 14.60 4.32 2.46 5.26 D-200-0238-RT 3 2 Yellow 1,900 6,755 (1.100) (0.575) (0.170) (0.097) (0.207) 27.94 14.60 2.80 1.63 3.81 D-200-0239-RT 3 2 Blue 779 2,680 (1.100) (0.575) (0.110) (0.064) (0.150) 27.94 14.60 4.32 2.46 5.26 D-200-0241-RT 2 2 Yellow 1,900 6,755 (1.100) (0.575) (0.170) (0.097) (0.207) 33.02 14.09 6.10 3.28 D-200-0242-RT 1 0 N/A 5,180 13,100 N/A (1.300) (0.555) (0.240) (0.129) 33.02 14.09 6.10 3.28 5.26 D-200-0243-RT 3 2 N/A 5,180 13,100 (1.300) (0.555) (0.240) (0.129) (0.207) 33.02 14.09 6.10 3.28 5.26 D-200-0252-RT 2 2 N/A 5,180 13,100 (1.300) (0.555) (0.240) (0.129) (0.207) MATERIALS 1. CABLE SEALING SLEEVE: INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer. Color: black MELTABLE INSERTS: Environment resistant modified thermoplastic fluoroelastomer. Color: light blue. 2. JUMPER BRAID: Nickel-plated copper alloy. 3. SOLDERSLEEVE: INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn96 per ANSI / J-STD-006. FLUX: TYPE ROM1 per ANSI / J-STD-004. Thermal indicator: color changes from orange to colorless. MELTABLE INSERT: Thermally Stabilized Thermoplastic. Color: blue. 4. CRIMP SPLICE: Nickel-plated copper alloy. 5. SEALING SPLICE SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer, containing two environment resistant sealing rings. Transparent blue. 6. MELTABLE INSERT: Environment resistant modified thermoplastic fluoroelastomer. Color: light blue. APPLICATION 1. These kits are designed to make an environment-resistant, 1 to 1, 1 to 2, or 2 to 2 in-line splice in shielded single, twisted pair, trio and quad cables having nickel-plated conductors and insulations rated for 150C minimum. 2. Temperature rating: -55C to +200C. 3. For product selection and installation procedures refer to the applicable sections of TE Connectivity RPIP-1103. DOCUMENT NO.: REV: REVISED PER. DATE: SHEET: D-200-02XX-RT G4 ECO-18-005120 April 4, 2018 2 of 2 2015-2018 TE CONNECTIVITY CORP. ALL RIGHTS RESERVED. If this document is printed it becomes uncontrolled. Check with the web for the latest revision