Specification Control EPD-RWC-12305 Drawing 7 conductor cable Issue E - 6/7/2018 Identification, colors & marks Cross section A 9/95 C B B 91 96 B 93 A 90/92 Components ID Quantity Part number Description A 2 EPD-RWC-12304 Twisted pair, shielded B 3 82A0111-22 Primary wire C 1 10610 Kevlar Strength Member Cable Outer Description Thickness OD Inches mm Inches mm Core 0.191 4.86 Wrap PET tape .001 0.002 0.05 0.195 4.97 Shield Spiral tinned copper 36 awg regular 0.006 0.14 0.206 5.24 Jacket Thermorad O black 0.027 0.69 0.260 6.62 Cable OD tolerance + 0.013 + 0.33 Specification Raychem WCD 3303 Weight 48.20 lb/kft 71.86 Kg/Km Page 1 of 2 This specification sheet takes precedence over documents referenced herein. Referenced documents shall be of the issue in effect on date of invitation to bid. Proposed specification control drawings may be altered prior to final issue. RCD Version 1.2 Level 1 Ser 5 RWC 8/7/95Specification Control EPD-RWC-12305 Drawing 7 conductor cable Issue E - 6/7/2018 Continued Physical properties Component Sequence The placing of the components in the cross sectional view of the cable is for reference only and is not a requirement. Notes Color code designators shall be in accordance with MIL-STD-681. Colors Dimensions and Weight Dimensions and finished cable weight are nominal, unless otherwise specified. Nominal values are for information only. Nominal values are not requirements. Export License Note These commodities, technology, or software, when exported from the United States, are required to be exported in accordance with the Export Administration Regulations. Diversion contrary to U.S. law is prohibited. Identification, Colors & Marks The following is the key to the descriptions in the left hand view of the cable on Page 1. Line 1: Identifies the component per the components ID list. Line 2: Color codes. Line 3: Mark on component mark on component jacket. Minimum length Cable will be supplied in 50 ft. minimum lengths unless otherwise specified. Part Number Note Other codes and suffixes may be added to the Part Number as necessary, to capture any additional requirements imposed by the purchase order. Specification Information This drawing is the property of TE Connectivity Corporation and may not be used for any purpose other than for that which it is supplied without the express written authority of TE Connectivity Corporation. Trademarks Raychem, Thermorad , TE Connectivity and TE Connectivity (logo) are trademarks. Page 2 of 2 This specification sheet takes precedence over documents referenced herein. Referenced documents shall be of the issue in effect on date of invitation to bid. Proposed specification control drawings may be altered prior to final issue. RCD Version 1.2 Level 1 Ser 5 RWC 8/7/95