Relay Product Group General Purpose Relays Power Latching Relay EW60 n 1 pole 60A, 1 form A (NO) contact n Polarized bistable (latching) with 1 or 2 coils n NEMA 410-2011, 16A, 277VAC, electronic ballast 20A branch circuit n 480A inrush, 2.1m sec Typical applications Lightting control, bus actuator, power distribution, circuit protection, inverter Approvals UL Contact Data Material group of insulation parts IIIa Contact arrangement 1 form A (NO) Tracking index of relay base PTI 175V Rated voltage 250VAC Max. switching voltage 440VAC Rated current 60A Other Data Breaking capacity max. 15kVA Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Contact material AgSnO refer to the Product Compliance Support Center at 2 Initial voltage drop 1m 3A, 12V www.te.com/customersupport/rohssupportcenter -1 Frequency of operation with/without load 360/3600h Ambient temperature -40 to 70C Category of environmental protection IEC 61810 RTI (dust protected) 1) Contact ratings Vibration resistance (functional) 1.5mm double amplitude Shock resistance (functional) 50g Type Contact Load Cycles Shock resistance (destructive) 100g UL508 Terminal type PCB Mounting 4 1) EW60-1A3 NO 60A, 250VAC, resistive, 70C 1x10 Weight appr. 37.5g 3 EW60-1A3 NO 60A, 250VAC, general use, 70C 6x10 Packaging/unit 200pcs/carton 1) 4 10...55Hz EW60-1A3 NO 120VAC, 1HP (horsepower) 23C 1x10 3 EW60-1A3 NO 16 or 20A, electr. ballast, 70C 50x10 1) in Process Coil Data Dimensions Magnetic system polarized, bistable (latching) Number of coils 1 or 2 Coil voltage range 12VDC Min./Max. energization duration 100ms/1min at <10% duty factor Coil versions, bistable coil Coil Rated Set Reset Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC 10% W bistable 1 coil BL12 12 9.6 9.6 96 1.5 bistable 2 coil CL12 12 9.6 9.6 48 3/3 All figures are given for coil without preenergization, at ambient temperature +23C Max. coil power: 130% of rated coil power Other coil voltages on request Coil operation 1 coil 2 coils coil terminals A1 A2 A1 A2 A3 Set - + - + Reset + - - + Contact position not defined at delivery Insulation Data Initial dielectric strength between open contacts 1500V rms between contact and coil 4000V rms Initial surge withstand voltage between contact and coil 10000V (1.2/50s) Clearance/creepage between contact and coil 6/9mm 1 04-2016, Rev. 0416 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2016 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company Relay Product Group General Purpose Relays Power Latching Relay EW60 (Continued) Wire Connection drawing PCB Drilling (Copper Side) bistable 1 coil: 1) bistable 2 coils: 1) if 2 coil version Product code structure Typical product code EW 6 0 -1 A 3 -B L12 D 0 4 Type (product family) Version - Current class / Model 6 60A Version - Orientation and PerformanceClass 0 vertical (Bottom-right), standard performance Number of Contact Poles 1 1 pole Contact configuration A form A (NO Contact) Contact material 3 AgSnO 2 Coil version B bistable 1 coil C bistable 2 coils Coil voltage L12 Low Sensitivity, 12V, Category of Protection D RTI (dust proof) Mechanical feature 0 standard Terminals 4 pcb terminals Product code Design Coil Contact material Part Number EW60-1A3-BL12D04 Vertical 12V Bistable, 1 Coil, 1.5W AgSnO 2071366-1 2 EW60-1A3-CL12D04 Vertical 12V Bistable, 2 Coils 3W AgSnO 2071366-2 2 Other types on request 2 04-2016, Rev. 0416 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2016 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company