FS2030-000X-0500-G TE Connectivity

FS20 Low Force Compression Load Cell SPECIFICATIONS 500 to 5000 Grams-Force Amplified Output Interchangeable Industry Standard Packaging CE Compliance The FS20 is a low compression force sensor that creates new markets previously unrealizable due to cost and performance constraints. The FS20 offers normalized zero and span for interchangeability and is thermally FEATURES compensated for changes in zero and span with respect to temperature. Small Size, Low Noise The FS20 incorporates TEs proprietary Microfused Robust, High Reliability technology which employs micromachined silicon High Over-Range Capability piezoresistive strain gages fused with high temperature Low Deflection glass to a high performance stainless steel substrate. Essentially Unlimited Cycle Life Expectancy Microfused technology eliminates age-sensitive organic Low Off Center Errors epoxies used in traditional load cell designs providing Fast Response Time excellent long term span and zero stability. The FS20 Industry Standard Packaging measures direct force and is therefore not subject to lead- 500 to 5000 Grams-Force Range die fatigue failure common with competitive designs which Reverse Polarity Protected use a pressure capsule embedded within a silicone gel- filled cavity. Operating at very low strains, Microfused technology provides an essentially unlimited cycle life APPLICATIONS expectancy, superior resolution, and high over-range Robotics End-Effectors capabilities. Variable Force Control The FS20 brings your OEM product to life whether Load and Compression Sensing you need thousands or millions of load cells annually. Medical Pumps Although the standard model is ideal for a wide range of Contact Sensing applications, our dedicated design team at our Load Cell Weighing Engineering Center is ready to provide you with custom Household Appliances designs for your OEM applications. Please refer to the FC22 and FC23 for higher force applications. SENSOR SOLUTIONS /// FS20 05/2020 Page 1 FS20 Low Force Compression Load Cell STANDARD RANGES Range Grams-Force 0 to 0500 0 to 0750 0 to 1000 0 to 1500 0 to 2000 0 to 3000 0 to 5000 PERFORMANCE SPECIFICATIONS Supply Voltage: 5.0V, Ambient Temperature: 25C (unless otherwise specified). TE Connectivity reserves the right to update and change these specifications without notice. PARAMETERS MIN TYP MAX UNITS NOTES Excitation Voltage 4.975 5 5.025 Vdc Zero Output (FS2030) 0.45 0.5 0.55 Vdc Zero Output (FS2050) 0.95 1 1.05 Vdc Output Span (FS2030) 3.9 4 4.1 Vdc Output Span (FS2050) 2.9 3 3.1 Vdc Non-Linearity -1 1 %FSO Zero Return -0.80 0.80 %FSO Span Repeat -0.80 0.80 %FSO Hysteresis -0.80 0.80 %FSO Thermal Zero Shift -0.05 0.05 %FSO/C 1 Thermal Sensitivity Shift -0.05 0.05 %FSO/C 1 Zero Drift -0.5 0.5 %FSO 3 minutes Creeping -0.5 0.5 %FSO 3 minutes Isolation Resistance (250Vdc) 50 M Safe Load Limit 2.5X Rated Operating Temperature -40 +85 C Storage Temperature -40 +85 C Compensated Temperature 0 50 C Humidity 0 90 %RH Deflection at Rated Load 0.05 mm Endurance 1.0 E+6 FS cycles For custom configurations, consult factory. Notes 1. Maximum temperature error over compensated range with respect to 25C CE Compliance IEC61000-4-2 4 KV/4 KV (Air/Contact) IEC61000-4-3 (3 V/m) IEC55022 Class A SENSOR SOLUTIONS /// FS20 05/2020 Page 2