5.6:1 shrink ratio HRSR/HRNF/ Available in semi-rigid or flexible flame retarded material HRHF Available with or without sealant/ High ratio adhesive coating heat-shrinkable tubing High Shrink Ratio heat-shrinkable tubing connectors and adaptors, thus simplifying and adhesives. The water-proofing (HR), with expansion ratios as high as repair of damaged cable. sealant provides environmental sealing 5.6:l, is designed to accommodate large and is watertight in wet and corrosive HRSR tubing is available in semi-rigid (FR) size differences between cables and cable locations. The thermoplastic adhesive or flexible (HF) flame retarded material, coating provides excellent strain relief as with or without factory applied sealants well as environmental sealing. Temperature rating Operating temperature range: -55C to +90C Minimum recovery temperature: +120C Ordering information Inside diameter Wall thickness (Min) (Max) (Nom) Expanded Recovered Recovered as supplied after heating after heating mm Inches mm Inches mm Inches Size description 15.3 (0.6) 3.9 (0.15) 1.5 (0.06) HR**-060 31.8 (1.25) 6.1 (0.24) 1.5 (0.06) HR**-125 44.5 (1.75) 8.0 (0.32) 2.4 (0.10) HR**-175 50.8 (2.0) 9.6 (0.38) 2.7 (0.11) HR**-200 63.5 (2.5) 12.7 (0.5) 3.0 (0.12) HR**-250 76.2 (3.0) 19.0 (0.75) 3.0 (0.12) HR**-300 101.6 (4.0) 22.9 (0.9) 3.5 (0.14) HR**-400 Dimensions apply to uncoated tubing. Allow approximately 1.3 mm for coating. Ordering example: HRSR- 060 FR - 10 /97 /NM No Mark (Optional) Colour Black (standard colour) Clear (HRNF/HRHF only) Pre-coat adhesive/sealant options /97 =hot melt adhesive /226=mastic sealant Standard Length Option 10 inches (250 mm) Consult Product Management for other cut lengths FR = Flame-Retardant CL=CLEAR Size code SR=Semi-Rigid flame retardant HF=High-Flex flame retardant NF=Semi Rigid non flame retardant (does not meet mil spec)HRSR/HRNF/HRHF Performance HRHF is a black, highly flexible, crosslinked polyolefin-based material. It is flame retarded and heat resistant. HRSR is a black, semi-rigid crosslinked polyolefin-based material. It is flame retarded and heat resistant. Test method HRHF HRSR Mechanical Tensile strength (min) ASTM D638 8.4 MPa 8.4 MPa Ultimate elongation (min) ASTM D638 200% 200% 2% secant modulus (max) ASTM D882 105 MPa 175 MPa Heat ageing (168 h at 175C) ASTM D2671, D412 Tensile strength (min) ASTM D638 7 MPa 7 MPa Ultimate elongation (min) ASTM D638 100% 100% Heat shock 4 h at 225C MIL-I-23053/15A Pass Pass Electrical Dielectric strength ASTM D2671 7.9 MV/m 7.9 MV/m 13 13 Volume resistivity (min) ASTM D876 10 ohm.cm 10 ohm.cm Flammability Flammability (method B) MIL-I-23053/15A 15 secs (max) 15 secs (max) Chemical Corrosion MIL-I-23053/15A Pass Pass Water absorption (max) ASTM D570 0.5% 0.5% Specific gravity (max) ASTM D1505 1.4 1.5 Fungus resistance ASTM G21 1 or less 1 or less Fluid resistance MIL-I-81765/1A (24 h at room temperature) De-icing fluid (MIL-A-8243) Hydraulic fluid (MIL-H-5606) JP-8 fuel (MIL-T-83133) Lubricating oil (MIL-L-7808) Lubricating oil (MIL-L-23699) 5% NaCI (0-S-1926) After immersion in the above fluids: Tensile strength (min) ASTM D638 5.3 MPa 5.3 MPa Ultimate elongation (min) ASTM D638 100% 100% Specifications Type Raychem HRSR RW 2013 HRHF RW 2013 /226 (S-1278) RW 2020 /97 (S-1297) RW 2019 Raychem and HRSR/HRNF/HRHF are trademarks of Tyco Electronics Corporation. All of the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification. Tyco Electronics Corporation Tyco Electronics UK Ltd Tyco Electronics Raychem K.K. Tyco Electronics Singapore PTE Ltd. 300 Constitution Drive Faraday Road, Dorcan, 3816 Noborito, Tama-ku 26 Ang Mo Kio Menlo Park, CA 94025-1164 Swindon, Wiltshire SN3 Kawasaki Industrial Park 2 USA 5HH Kanagawa 214-8533 Singapore 569507 Tel: (800)-926 2425 (US and Canada) Tel: (44)-1793-528171 Japan Tel: +65 4866151 Tel: +1 650 361 3860 (All other countries) Tel: +81 44 900 5102 www.tycoelectronics.com RI0008