HX-SCE-6.4-50-4 TE Connectivity

TECHNICAL DATA SHEET TE Document: TTDS-108 Issue: 6 Date: July 2014 HX LFH Heat Shrink Marker Sleeve HX Low Fire Hazard (LFH) marker sleeves for the identification of wires and cables. Presented as cut sleeves organised in a ladder format. Manufactured using a specially developed radiation cross-linked material. Formulated to give Low Fire Hazard properties, which allow this product to be used in locations where fire may pose a risk to human life, and property. Typical installations include rail, mass transit, and heavy industrial. HX (LFH) marker sleeves are available as part of a complete printing system. The system comprises specific printers, thermal transfer ribbons and WINTOTAL software. KEY FEATURES TEMPERATURE RATING Operating Temperature Range -55C to 105C (-40F to 221F) Zero Halogen Low Toxic Fumes ENVIRONMENTAL Low Smoke Does not contain any declarable or prohibited substances from the UNIFE Railway Industry Substances List Self-extinguishing, non-flame propagating No Halogens, Sulphur, Nitrogen, Phosphorus and Cadmium sources Low heat release rate above trace level. The flame retardant used in this product does not Resistant to key industrial and rail fluids contain melamine cyanurate. (defined by RW-2072) Does not promote mould growth (ASTM G21 zero rating) Excellent resistance to burning Further information and a downloadable declaration covering RoHS - typical LOI 39% and REACH compliance can be found at the TE Product Compliance Sleeve diameters from 2.4mm to 38.1mm Support Centre: Shrink ratio 2:1 TECHNICAL DATA SHEET TE Document: TTDS-108 Issue: 6 Date: July 2014 ORDERING INFORMATION HX LFH Heat Shrink Marker Sleeve AVAILABLE FORMAT OPTIONS Prescoring Perforated score to produce multiple marker sleeves from each HX-SCE sleeve. Standard Not scored Code Blank Non standard Side scored Code SS Sided scored w ith one pre score Code SS1 1 Prescore Code S1 2 Prescores Code S2 3 Prescores Code S3 Packaging sizes 1000 piece packages available Standard 1K - for all HX-SCE sizes upto to 25.4 2500 pieces available for 4.8 and Non Standard 2.5k - 6.4 HX-SCE sizes up to 25.4 5000 pieces available for 2.4 and 3.2 5k - HX-SCE sizes 250 piece package available for all <no number> HX-SCE sizes Colors Standard Yellow White Code 4 9 Non standard Red Green Blue Orange Code 2 5 6 3 Specify product name, pack size, sleeve size, sleeve length (always 50) pre-score (blank if not required) and colour. Ordering example: HX-SCE-1K-4.8-50-S1-4 Inside diameter Recommended w ire diameter After Ordering description As supplied use range recovery (minimum) (Maximum) mm inches mm inches mm inches 1.19 0.047 HX-SCE-1K-2.4-50-<score>-<color> 2.4 0.094 1.27 - 1.90 0.050 - 0.075 1.58 0.060 HX-SCE-1K-3.2-50-<score>-<color> 3.2 0.126 1.77 - 2.66 0.069 - 0.105 2.36 0.090 HX-SCE-1K-4.8-50-<score>-<color> 4.8 0.189 2.54 - 4.06 0.100 - 0.160 3.18 0.125 HX-SCE-1K-6.4-50-<score>-<color> 6.4 0.250 3.81 - 5.46 0.150 - 0.215 4.75 0.187 HX-SCE-1K-9.5-50-<score>-<color> 9.5 0.375 5.59 - 8.12 0.220 - 0.320 6.35 0.250 HX-SCE-1K-12.7-50-<score>-<color> 12.7 0.500 6.99 - 10.79 0.275 - 0.425 9.53 0.375 HX-SCE-1K-19.0-50-<score>-<color> 19.0 0.730 10.16 - 16.25 0.400 - 0.640 12.70 0.500 HX-SCE-1K-25.4-50-<score>-<color> 25.4 1.000 14.29 - 21.59 0.563 - 0.850 19.05 0.750 HX-SCE-38.1-50-<score>-<color> 38.1 1.500 20.95 - 33.02 0.825 - 1.300 Standard pack size for 38.1 is 250 pieces PRINTER INFORMATION SOFTWARE Print Quality and Print Performance can only be Cable Markers are fully supported by WINTOTAL and PrintEasy label guaranteed when specific TE printer and ribbons are used. printing software, available from the TE product store: The current list of printers and ribbons can be found in TE