4 3 2 1 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION - REVISIONS ALL RIGHTS RESERVED. COPYRIGHT copyright dateBY - C P LTR DESCRIPTION DATE DWN APVD REVISED TOLERANCE 20APR2018 JS AS 2 FLYING LEADS OFF-(ON) 17.50 D .689 D CAP COLOR: SEE TABLE 2.0 POS.1 POS.2 Model .08 12.00 .473 No. PB6 OFF 5.00 MOM(ON) 1.20 .197 C C .047 CONNECTED OPEN CLOSE TERMINALS 7.30 9.40 .287 .370 SCHEMATIC 1 2 1 2 M12x0.75 EPOXY SWITCH FUNCTION 10.00 .394 HEAT SHRINK TUBE 50010 19.7394 SPECIFICATIONS: MATERIALS: MAXIMUM CURRENT/VOLTAGE RATING WITH RESISTIVE LOAD: CAP: POLYAMIDE 6/6 400mA 32VAC, 200mA 50VDC, 125mA 125VAC PLUNGER: POLYAMIDE 6/6 OR POLYCARBONATE RUBBER: SILICONE INITIAL CONTACT RESISTANCE: 100m MAXIMUM, RESISTANCE BUSHING: POLYAMIDE 6/6 OF THE WIRE NOT INCLUDED. CASE: DIALLYL PHTHALATE (DAP) (UL94 V-0) B INSULATION RESISTANCE: 1 G MINIMUM AT 500 VDC TERMINALS/CONTACTS: COPPER ALLOY, GOLD OVER B DIELECTRIC STRENGTH: 1,500 VAC RMS SILVER PLATED CONTACT BOUNCE: 10ms HEX NUT: BRASS, NICKEL PLATED (1) ELECTRICAL LIFE AT FULL LOAD: 500,000 CYCLES LOCK WASHER: BRASS, NICKEL PLATED (1) MECHANICAL LIFE: 1,000,000 CYCLES O-RING: SILICONE (1) TOTAL TRAVEL: 1.5 (.059) WIRE: UL 3385, 20 AWG, SECTION 0.6mm ACTUATION FORCE: 3 TO 6N SPRING: STEEL OPERATING TEMPERATURE: -30 TO 85 C HEAT SHRINK TUBE: POLYOLEFIN DEGREE OF PROTECTION: IP68, 1 HOUR 1 METER TORQUE: 0.5Nm MAXIMUM APPLIED TO NUT PACKAGING: +0.05 SWITCHES ARE BUNDLED. HARDWARE IS NOT ASSEMBLED TO THE SWITCH. 12.90 1 -0.03 COMPLIANCE: +.002 .508 ALL MATERIALS AND FINISHES SHALL COMPLY WITH EU DIRECTIVE 2002/95/EC OF 27JAN2003(RoHS) -.001 SOLDER PROCESSING: MANUAL SOLDERING: SOLDER IRON, 30 WATTS, CONTROLLED AT 350 C, APPROXIMATELY 5 SECONDS WHILE APPLYING SOLDER. 10.70 2 TERMINAL 2 BLACK FLAT .421 1. HARDWARE IS SHIPPED UNASSEMBLED. FLAT 1 TERMINAL 1 BLACK NO. DESCRIPTION WIRE COLOR +0.00 DWN 22FEB2018 THIS DRAWING IS A CONTROLLED DOCUMENT. RAVI.S -0.10 TE Connectivity CHK 22FEB2018 A A +.000 2 ALEXANDER SHARPE .535 DIMENSIONS: TOLERANCES UNLESS APVD NAME OTHERWISE SPECIFIED: -.004 22FEB2018 ALEXANDER SHARPE mm INCHES SWITCH,PUSHBUTTON,FLAT CAP NO LED, PRODUCT SPEC 0 PLC - PANEL CUT-OUT FLYING LEADS WITH HEAT SHRINK,SEALED, 1 PLC 0.4 .016 - THICKNESS: 1.5mm~4.0mm 2 PLC 0.25 .010 OFF-(ON) AND ON-(OFF) APPLICATION SPEC 3 PLC - .059~.157 4 PLC SIZE CAGE CODE DRAWING NO RESTRICTED TO - - ANGLES 5 MATERIAL FINISH WEIGHT 2329386 - 00779 A2 - - SCALE SHEET OF REV CUSTOMER DRAWING - - 3:2 1 3 2 1471-9 (3/13)4 3 2 1 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION - REVISIONS ALL RIGHTS RESERVED. COPYRIGHT copyright dateBY - C P LTR DESCRIPTION DATE DWN APVD SEE SHEET 1 - - - - FLYING LEADS ON-(OFF) 17.50 .689 D D POS.1 POS.2 Model CAP COLOR: SEE TABLE No. PB7 ON MOM(OFF) CONNECTED 12.00 CLOSE OPEN 2.0 TERMINALS .473 .08 C C 1 2 2 SCHEMATIC 1 5.00 1.20 .197 .047 SWITCH FUNCTION 7.30 10.00 .287 .394 M12x0.75 10.00 EPOXY 15.90 .394 14.00 16.00 2.50 .626 .551 .630 .098 HEAT SHRINK TUBE 50010 19.7394 16.00 .630 B B M12x0.75 SI 1.00 THK O-RING HEX NUT .039 1.20 .047 +0.05 LOCK WASHER 12.90 -0.03 +.002 .508 1 -.001 FLAT FLAT 2 TERMINAL 2 BLACK 10.70 1 TERMINAL 1 BLACK +0.00 .421 -0.10 NO. DESCRIPTION WIRE COLOR +.000 DWN 22FEB2018 .535 THIS DRAWING IS A CONTROLLED DOCUMENT. 2 RAVI.S -.004 TE Connectivity CHK 22FEB2018 A A ALEXANDER SHARPE DIMENSIONS: TOLERANCES UNLESS APVD NAME OTHERWISE SPECIFIED: 22FEB2018 ALEXANDER SHARPE mm INCHES SWITCH,PUSHBUTTON,FLAT CAP NO LED, PRODUCT SPEC 0 PLC - FLYING LEADS WITH HEAT SHRINK,SEALED, PANEL CUT-OUT 1 PLC 0.4 .016 - 2 PLC 0.25 .010 THICKNESS: 1.5mm~4.0mm OFF-(ON) AND ON-(OFF) APPLICATION SPEC 3 PLC - .059~.157 4 PLC SIZE CAGE CODE DRAWING NO RESTRICTED TO - - ANGLES 5 MATERIAL FINISH WEIGHT 2329386 - 00779 A2 - - SCALE SHEET OF REV CUSTOMER DRAWING - - 3:2 2 3 2 1471-9 (3/13)