X-On Electronics has gained recognition as a prominent supplier of PROTO-USBDEVELKIT Pressure Sensor Development Tools across the USA, India, Europe, Australia, and various other global locations. PROTO-USBDEVELKIT Pressure Sensor Development Tools are a product manufactured by TE Connectivity. We provide cost-effective solutions for Pressure Sensor Development Tools, ensuring timely deliveries around the world.
We are delighted to provide the PROTO-USBDEVELKIT from our Pressure Sensor Development Tools category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the PROTO-USBDEVELKIT and other electronic components in the Pressure Sensor Development Tools category and beyond.
PRELIMINARY USBDEVELKIT DEVELOPMENT KIT V3 USB interface Back auxiliary connector for external sensors RoHS-compatible & Pb-free Flash software upgradeable through USB Software compatible with windows 7 / XP Recording software DESCRIPTION The USB demonstration kit provides easy to use hardware and software for evaluation of MEAS pressure sensor. The software allows basic graphing and logging of the row and calibrated pressure and temperature as well as altitude data. The software interface also shows the sensor calibration words and provides tunable averaging of the measured data. FEATURE Supply voltage from USB Demonstrator for future products Graphing and data logging software Sample board for each sensors Fast measurement rate up to ~25 0C to +50C operation temperature samples/s PACKAGE CONTENT 1 USB developer key Samples boards on request. 1 Software driver and manual on Compact Disk CD USBDEVELKIT DEVELOPMENT KIT V3 001 www.meas-spec.com August 8, 2013 000USBDK2034 ECN1444 1/5 PRELIMINARY USBDEVELKIT DEVELOPMENT KIT V3 ABSOLUTE MAXIMUM RATINGS Parameter Conditions Min Max Unit Notes Symbol o Supply voltage USBVDD Ta = 25 C -0.3 6.0 V o Storage temperature T -20 +85 C 1 S NOTE 1) Storage and operation in an environment of dry and non-corrosive gases. RECOMMANDED OPERATION CONDITIONS (Ta = 25C, VDD = 3.0 V unless noted otherwise) Parameter Symbol Conditions Min. Typ. Max Unit Supply voltage VDDUSB 5.0 V Supply current, VDD = 5.0 V I 13.5 mA Active Active I 4 mA Idle Idle Actual 25 Hz Update speed. performance may vary 1 25 Hz with time and computer Operating temperature T 0 +25 +50 C range Internal Self Test Key P error +/-5 mBar FUNCTION GENERAL The USB DEVEL module is meant for evaluation of new and future pressure sensor modules from MEAS Switzerland Srl. The module and software will allow the user to see the raw and calibration data read from the sensor as well the calculated pressure and altitude derived from those data. HUMIDITY, WATER PROTECTION The USB DEMO module case does not provide special water protection. LIGHT SENSITIVITY The USB DEMO module should provide adequate light protection for most indoor and outdoor lightning situations. ESD PRECAUTIONS Some ESD suppressor diodes help protect against the risks due to electrostatic discharges on the USB port connectors up to 2kV direct discharge. USBDEVELKIT DEVELOPMENT KIT V3 001 www.meas-spec.com August 8, 2013 000USBDK2034 ECN1444 2/5