RP7SL012 TE Connectivity

General Purpose Low Power PCB Relays SCHRACK Special Load PCB Relay RP3SL n 1 pole 16A, 1 form A (NO) contact n For high inrush currents up to 120A n Mono- or bistable n 4kV/8mm coil-contact Typical applications Lighting control, timers, motor control, building automation. Z Approvals Coil Data VDE Cert. No. 40025448 (DC versions only), UL E214024 Coil data, monostable coil Technical data of approved types on request. Coil voltage range 5 to 110VDC Operative range, IEC 61810 Contact Data flux proof version 2 Contact arrangement 1 form A (NO) wash tight version 1 Rated voltage 250VAC Coil versions, DC coil Max. switching voltage 400VAC Coil Rated Operate Release Coil Rated coil Rated current code voltage voltage voltage resistance power flux proof version 16A 1) VDC VDC VDC 10% mW wash tight version 12A 005 5 3.8 0.5 54 500 Limiting making current 006 6 4.5 0.6 68 500 max. 4 s, duty factor 10 % 25A 012 12 9.0 1.2 270 500 max. 20 ms (incandescent lamp) 120A 1) 024 24 18.0 2.4 1100 500 Breaking capacity max. 1) 048 48 36.0 4.8 4400 500 flux proof version 4000VA 1) 060 60 45.0 6.0 6540 500 wash tight version 3000VA Contact material AgSnO -1 Frequency of operation, with/without load 960/72000h Operate/release time max., monostable 14/12ms Set/reset time max., bistable 30/25ms Bounce time max. monostable 5/7ms bistable 5/15ms Contact ratings Type Contact Load Cycles IEC61810 3 RP3SL A (NO) 16A, 250VAC resistive, 70C 50x10 3 RP7SL A (NO) 12A, 250VAC resistive, 70C 100x10 Coil Data, bistable coil 1 coil 2 coils Mechanical endurance 6 Coil voltage range 5 to 24VDC monostable >20x10 operations 6 Operative range, IEC 61810 1 bistable >1x10 operations Reset voltage min/max, % of Urtd 70/110% 75/120% Min./Max. energization duration 20ms/1min at < 50%DF Coil versions, bistable Coil Rated Set Reset Reset Coil Rated coil code voltage voltage voltage R1 resistance power 1) VDC VDC VDC /W 10% mW Coil versions, bistable 1 coil A05 5 3.7 3.6 39/0.5 21 1250 A12 12 9.0 8.7 220/0.5 115 1250 A24 24 18.0 16.7 820/0.5 460 1250 Coil versions, bistable 2 coils 1) F12 12 9.0 9.0 105 1250 1) F24 24 18.0 18.0 460 1250 1) Coil resistance 15% . All figures are given for coil without pre-energization, at ambient temperature +23C, duty factor 20%. Other coil voltages on request. 1 10-2014, Rev. 1014 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2014 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company. General Purpose Low Power PCB Relays SCHRACK Special Load PCB Relay RP3SL (Continued) Insulation Data Circuit scheme for bistable 1 coil Initial dielectric strength between open contacts 2000V rms between contact and coil 4000V rms Clearance/creepage between contact and coil 8/8mm Material group of insulation parts IIIa Tracking index of relay base PTI250V Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature flux proof version -40 to +70C wash tight version -40 to +35C PCB layout / terminal assignment Category of environmental protection Bottom view on solder pins IEC 61810 RTII - flux proof, RTIII - wash tight Vibration resistance (functional), form A contact 20g Shock resistance (destructive) 100g Terminal type PCB-THT Mounting distance, 12A/16A 0mm/3mm Weight 18g Resistance to soldering heat THT, IEC 60068-2-20 flux proof version 270C/10s wash tight version 260C/5s Packaging/unit monostable and bistable 1coil version tube/20 pcs., box/500 pcs. bistable 2coil version tray/25 pcs., box/100 pcs. Bistable versions: Indicated contact position during or after coil energization with reset voltage. 2-coil versions: Operate A2, A3 Reset A1, A3 b) for 2 coil version only Dimensions 2 10-2014, Rev. 1014 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2014 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company.