General Purpose Relays PCB Relays Potter & Brumfield Power PCB Relay RT2 n 2 pole 8A, 2 form C (CO) or 2 form A (NO) contacts n Sensitive coil 400mW n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature 85C Typical applications Boiler control, timers, garage door control, POS automation, interface modules VZb Approvals Coil Data Coil voltage range 5 to 110VDC VDE Cert. No. 40007571, UL E214025, cCSAus 1142018, CQC 18002197247 Operative range, IEC 61810 2 Technical data of approved types on request Coil insulation system according UL class F Contact Data Contact arrangement 2 form C (CO) or 2 form A (NO) Coil versions, DC coil Rated voltage 250VAC Coil Rated Operate Release Coil Rated coil Max. switching voltage 400VAC code voltage voltage voltage resistance power Rated current 8A, UL: 10A VDC VDC VDC 10% mW Limiting continuous current 8A, UL: 10A 005 5 3.5 0.5 62 403 Limiting making current, max. 4s, duty factor 10% 15A 006 6 4.2 0.6 90 400 Breaking capacity max. 2000VA 009 9 6.3 0.9 200 400 Contact material AgNi 90/10 012 12 8.4 1.2 360 400 -1 Frequency of operation, with/without load 360/72000h 024 24 16.8 2.4 1440 400 Operate/release time max., DC coil 8/6ms 048 48 33.6 4.8 5520 417 All figures are given for coil without pre-energization, at ambient temperature +23C. Bounce time max., DC coil, form A/form B 4/10ms Other coil voltages on request. Contact ratings Type Contact Load Cycles IEC 61810 3 RT424 DC coil C (CO) 8A, 250VAC, cos=1, 85C 10x10 3 RT444 AC coil A (NO) 8A, 250VAC, cos=1, 70C 50x10 3 RT424 AC coil C (CO) 8A, 250VAC, cos=1, 70C 30x10 UL 508 3 RT424 DC coil A/B (NO/NC) 10A, 250VAC, gen. purpose, 85C 20x10 3 RT424 DC coil A/B (NO/NC) 1/2hp, 240VAC, 85C 1x10 3 RT424 DC coil A/B (NO/NC) Pilot duty, B300, R300, 85C 6x10 EN60947-5-1 RTE24 DC coil A/B (NO/NC) AC15, 250VAC, 3A 6.050 RTE24 DC coil A/B (NO/NC) DC13, 24VDC, 2A 6.050 RTE24 DC coil A/B (NO/NC) DC13, 250VDC, 0.2A 6.050 EN60730-1 3 RT424 DC coil A/B (NO/NC) 6(2)A, 250VAC, 85C 100x10 Insulation Data 6 Mechanical endurance >30x10 operations Initial dielectric strength between open contacts 1000V rms between contact and coil 5000V rms between adjacent contacts 2500V rms Clearance/creepage between contact and coil 10/10mm between adjacent contacts 3/4mm Material group of insulation parts IIIa Tracking index of relay base PTI 250V 1 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays PCB Relays Potter & Brumfield Power PCB Relay RT2 (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to 85C Category of environmental protection IEC 61810 RTII - flux proof, RTIII - wash tight Vibration resistance (functional), form A/form B contact, 30 to 300Hz 20g/5g Shock resistance (destructive) 100g Terminal type PCB-THT, plug-in Weight 13g Resistance to soldering heat THT, IEC 60068-2-20 RTII 270C/10s RTIII 260C/5s Packaging/unit tube/20pcs., box/500pcs. Accessories For details see datasheet Accessories Industrial Power Relay R T NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1) for relays mounted on sockets deratings may apply. Dimensions PCB layout / terminal assignment Bottom view on solder pins S0418-CA S0272-BA *) With the recommended PCB hole sizes a grid pattern from 2.5mm to 2.54 mm can be used. 2 form C (CO) contacts S0163-BJ 2 form A (NO) contacts S0163-BK 2 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company