General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 Inrush Power n 1 pole 16A, 1 form A (NO) contact (W pre-make contact + AgSnO ) 2 n 10A/250VAC making and breaking capacity acc. to IEC 60669-1 n 165A/20ms inrush peak current n Mono- or bistable coil n 5kV/10mm coil-contact n Reinforced insulation n Test tab (manual operator) optional Typical applications Lighting systems, movement sensors, filament and incandescent lamp F0272-B loads, motors VZb Approvals Contact Data (continued) VDE REG.-Nr. 6106,UL E214025, cCSAus 14385 Technical data of approved types on request Mechanical endurance 6 6 DC coil >5x10 ops. >10x10 ops. 6 6 Contact Data RT.3T RTS3L bistable version >3x10 ops. >5x10 ops. 3 Contact arrangement 1 form A (NO) contact tab manually operated >1x10 ops. - Rated voltage 250VAC Max. switching voltage 400VAC Rated current 16A Coil Data, monostable DC coil Limiting continuous current 16A, UL: 20A (RTS3L) Coil voltage range 5 to 110VDC Limiting making current, Operative range, IEC 61810 2 max. 20ms (incand. lamps) 165A 120A Coil insulation system according UL1446 class F max. 200s (flourescent lamps) 800A - Breaking capacity max. 4000VA Coil versions, monostable DC coil Contact material W (pre-make cont.) AgSnO Coil Rated Operate Release Coil Rated coil 2 +AgSnO code voltage voltage voltage resistance power 2 1) Contact style pre-make contact single contact VDC VDC VDC 10% mW -1 Frequency of operation, with/without load 360/3600h 005 5 3.5 0.5 62 403 Operate/release time max., DC coil 10/5ms 006 6 4.2 0.6 90 400 Operate/Reset time max., bistable version 10/10ms 012 12 8.4 1.2 360 400 Bounce time max. 4ms 024 24 16.8 2.4 1440 400 048 48 33.6 4.8 5520 417 1) Contact ratings 060 60 42.0 6.0 8570 420 1) Type Contact Load Cycles 110 110 77.0 11.0 28800 420 1) Coil resistance 12%. IEC 61810 3 All figures are given for coil without pre-energization, at ambient temperature +23C. RTS3L A (NO) 20A, 250VAC resistive, 70C 20x10 3 Other coil voltages on request. RTS3L monostable A (NO) 16A, 250VAC resistive, 85C 100x10 3 RTS3T A (NO) 16A, 250VAC resistive, 85C 5x10 UL 508 3 RTS3L A (NO) 20A, 250VAC, general purpose, 70C 20x10 3 RTS3L A (NO) 16A, 250VAC, resistive, 85C 50x10 3 RTS3L A (NO) TV8, 240VAC, 40C 25x10 3 RTS3L A (NO) 1.5hp, 240VAC, 70C 30x10 RTS3T A (NO) 1200W Tungsten, 120VAC/277VAC, 3 60Hz, 50C 6x10 RTS3T A (NO) 620W Discharge lamps (standard ballast), 3 120VAC/277VAC, 60Hz, 50C 6x10 Coil Data, bistable coils 1 coil 2 coils Magnetic system polarized, bistable Coil voltage range 3 to 24VDC Operative range, IEC 61810 2 Limiting voltage, % of rated coil voltage 120% 150% Min./Max. energization duration 30ms/1min at <10% duty factor Coil insulation system according UL1446 class F 1 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 Inrush Power (Continued) Coil Data (continued) Other Data RT.3T RTS3L Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Coil versions, bistable refer to the Product Compliance Support Center at Coil Rated Set Reset Coil Rated coil www.te.com/customersupport/rohssupportcenter code voltage voltage voltage resistance power Ambient temperature VDC VDC VDC 10% mW monostable DC coil -40 to 85C Coil versions, bistable 1 coil bistable 1 coil -10 to 85C A03 3 2.1 1.7 21 429 bistable 2 coils -40 to 85C A12 12 8.4 6.6 360 400 Category of environmental protection A24 24 16.8 13.2 1440 400 IEC 61810 RTII - flux proof Coil versions, bistable 2 coils Vibration resistance (functional), F03 3 2.1 1.7 15 600 monostable version 10g 20g F12 12 8.4 6.6 240 600 Shock resistance (destructive) 100g 2) F24 24 16.8 13.2 886 650 Terminal type PCB-THT, plug-in All figures are given for coil without pre-energization, at ambient temperature +23C. Weight, without / with test tab 14/16g 14g/- Other coil voltages on request. Resistance to soldering heat THT Bistable coils - operation IEC 60068-2-20 270C/10s Version 1 coil 2 coils Packaging/unit Coil terminals A1 A2 A1 A3 A2 without test tab tube/20 pcs., tube/20 pcs., Operate + - + - box/500 pcs. box/500 pcs. Reset - + - + with test tab tray/25 pcs., - Contact position not defined at delivery box/100 pcs. - 2) RTT3T or bistable 2 coil version: pcb mounting only. See Accessories Accessories RTS3. For details see datasheet Accessories Industrial Power Relay R T Socket available for 1 coil version only. NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1) for relays mounted on sockets deratings may apply. Insulation Data Initial dielectric strength between open contacts 1250V rms between contact and coil 5000V rms Clearance/creepage between contact and coil 10/10mm Material group of insulation parts IIIa Tracking index of relay base PTI 250V 2 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company