SPECIFICATION CONTROL DRAWING Product Revision Component Dimensions Shall Accommodate Cable with Dimensions Product Ident. L1.75 B C H E F D Name Code (L0.070) min min min max min max 16.50 1.90 2.65 8.25 2.65 0.90 1.90 S03-01-R D S0301R (0.650) (0.070) (0.105) (0.325) (0.105) (0.035) (0.075) 16.50 2.65 3.68 8.25 3.68 1.40 2.65 S03-02-R D S0302R (0.650) (0.105) (0.145) (0.325) (0.140) (0.055) (0.105) 16.50 4.30 5.08 8.25 5.08 2.15 4.30 S03-03-R D S0303R (0.650) (0.170) (0.200) (0.325) (0.200) (0.085) (0.170) 19.10 5.95 6.45 8.25 6.45 3.30 5.95 S03-04-R D S0304R (0.750) (0.235) (0.255) (0.325) (0.255) (0.130) (0.235) 19.10 7.00 7.60 8.25 7.60 4.30 7.00 S03-05-R D S0305R (0.750) (0.275) (0.300) (0.325) (0.300) (0.170) (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Color change violet to colorless. 3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED BRAID: Tin-plated copper strands. CMA 640. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the dimensional criteria listed and having tin or silver-plated shields and insulation compatible with the insert material. For compatible insulations, see MIL-S-83519/2 or consult TE Connectivity/Raychem. 2. When installed per TE Connectivity /Raychem process standard RCPS-100-70, assemblies will meet those requirements of TE Connectivity /Raychem Specification RT-1404 and MIL-S-83519/2, which do not require electrical testing while parts are immersed in water. 3. Temperature range: -55C to +150C. 4. Parts shall be marked with identification code per table. For best results, prepare the cable as shown: SolderSleeve is a trademark of TE Connectivity. TITLE: TE Connectivity SOLDERSLEEVE DEVICES SHIELD Raychem 300 Constitution Drive, TERMINATION WITH PRE-INSTALLED Menlo Park, CA. 94025, U.S.A. BRAID DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. Inches dimensions are shown in brackets S03-01/-05-R TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend 0.00 N/A this drawing at any time. Users should evaluate PROD. REV.: DOC. ISSUE: DATE: 0.0 N/A ROUGHNESS IN the suitability of the product for their SEE TABLE 5 15-Apr-11 0 N/A MICRON application. DRAWN BY: CAGE CODE: REPLACES: DCR NUMBER: SCALE: SIZE: SHEET: M. FORONDA 06090 None A 1 of 1 D982098 D030251 Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision. 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder & Shield Tubing category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : CTC-0062-20-9/5-9 CTC-0062-22-9/5-9 680441-000 D-150-0331CS2902 D-181-1222-90/9CS2800 D-300-01CS1108 982127-1 D-436- 0127CS391 D-436-0182CS246 D-436-37CS2651 D-436-58CS246 D-436-61CS246 D-436-82-CS2621 D-750-0005CS2493 E53797N001 S200-2-01 S200-4-00CS2904 LSS-81-16AA-CS5575 SO63-2-9036-22CS2677 SO63-3-01CS293 SO63-3-9036-20CS2677 SO63-3-9036- 22CS2677 SO63-4-9036-20CS2677 SO63-5-9036-22CS2677 CC1525-000 CTA-0025 D-108-01CS227 D-108-07CS436 D-128-0010 D-141- 0108CS404 D-142-51-202-7754 D-144-41CS1371 D-150-0231-NRCS2896 B-801-18-01 515-9 C67137-000 D-436-36CS2908 D-436- 37CS2908 D-436-52CS246 D-436-83CS2705 D-438-0102 LSS-26-8A 427243-000 D-106-2012 D-300-08CS1108 UWCS-2U/7.6-1C/5.8 620026-000 B-004-00 699055-000 140945-000