CUSTOMER DRAWING Component Dimensions Shall Accommodate Cable with Dimensions Product Name Ident. L1.75 B C H E F D Code (L0.070) min min min max min max 16.50 1.90 2.65 8.25 2.65 0.90 1.90 S03-01-R S0301R (0.650) (0.075) (0.105) (0.325) (0.105) (0.035) (0.075) 16.50 2.65 3.68 8.25 3.68 1.40 2.65 S03-02-R S0302R (0.650) (0.105) (0.145) (0.325) (0.145) (0.055) (0.105) 16.50 4.30 5.08 8.25 5.08 2.15 4.30 S03-03-R S0303R (0.650) (0.170) (0.200) (0.325) (0.200) (0.085) (0.170) 19.10 5.95 6.45 8.25 6.45 3.30 5.95 S03-04-R S0304R (0.750) (0.235) (0.255) (0.325) (0.255) (0.130) (0.235) 19.10 7.00 7.60 8.25 7.60 4.30 7.00 S03-05-R S0305R (0.750) (0.275) (0.300) (0.325) (0.300) (0.170) (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Color change violet to colorless. 3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED BRAID: Tin-plated copper strands. CMA 640. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125 C minimum, meeting the dimensional criteria listed and having tin or silver-plated shields and insulation compatible with the insert material. For compatible insulations, see MIL-S-83519/2 or consult TE Connectivity. 2. When installed per TE Connectivity /Raychem process standard RCPS-100-70, assemblies will meet those requirements of TE Connectivity /Raychem Specification RT-1404 and MIL-S-83519/2, which do not require electrical testing while parts are immersed in water. 3. Temperature range: -55 C to +150 C. 4. Parts shall be marked with identification code per table. For best results prepare the cable as shown below. TITLE: SOLDERSLEEVE* DEVICES SHIELD Raychem TERMINATION WITH PRE-INSTALLED DEVICES BRAID DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. Inches dimensions are shown in brackets S03-01/-05-R TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to 0.00 N/A amend this drawing at any time. Users REV : DATE : 0.0 N/A ROUGHNESS IN should evaluate the suitability of the E 30-Mar-2020 0 N/A MICRON product for their application. PREPARED BY: CAGE CODE: ECO: SCALE: SIZE: SHEET: M. FORONDA 06090 ECO-20-004510 NTS A 1 of 1 2020 TE Connectivity Ltd. Family of Companies. All Rights Reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. *TE Connectivity, TE connectivity (logo), Raychem, SolderSleeve are trademarks X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder Sleeves & Shield Tubing category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : 899170-000 620040N001 620069N003 CTA-0050-01 629624-000 6500750004 6501390002 CX0781-000 696396-000 697080-000 D-150- 0331CS2902 D-181-1222-90/9CS2800 D-300-01CS1108 715325N001 908357N001 982127-1 D-436-0182CS246 D-436-37CS2651 D-436- 61CS246 D-436-82-CS2621 D-659-0087 E53797N001 CB0213-000 CB0219-000 S200-2-01 S200-4-00CS2904 LSS-81-16AA-CS5575 ST18-2-00 FLX40-020-04-CS8651 325534-000 CTA-0025 D-108-07CS436 D-128-0010 D-141-0108CS404 D-144-41CS1371 D-150-0231- NRCS2896 D-150-1011 395947-000 427243N001 B-801-18-01 515-9 C67137-000 CB0220-000 D-436-0185CS1102 D-436-36CS2908 D- 436-37CS2908 D-436-52CS246 D-436-83CS2705 D44133N001 LSS-26-8A