S03-10-R-100HN TE Connectivity

SPECIFICATION CONTROL DRAWING Product Revision Product Dimensions Cable Dimensions Product Ident. B C H E F D L 1.75 Name Code min. min. min. max. min. max. (L 0.07) S03-06-R-100HN A S0306R 16.5 1.90 2.67 8.20 2.67 0.90 1.90 (0.650) (0.075) (0.105) (0.323) (0.105) (0.035) (0.075) S03-07-R-100HN A S0307R 16.5 2.67 3.68 8.20 3.68 1.40 2.67 (0.650) (0.105) (0.145) (0.323) (0.145) (0.055) (0.105) S03-08-R-100HN A S0308R 16.5 4.32 5.08 8.20 5.08 2.15 4.32 (0.650) (0.170) (0.200) (0.323) (0.195) (0.085) (0.170) S03-09-R-100HN A S0309R 19.1 5.97 6.48 8.20 6.48 3.30 5.97 (0.750) (0.235) (0.255) (0.323) (0.255) (0.130) (0.235) S03-10-R-100HN A S0310R 19.1 6.98 7.62 8.20 7.62 4.30 6.98 (0.750) (0.275) (0.300) (0.323) (0.300) (0.170) (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Color change violet to colorless. 3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED BRAID: Nickel plated copper strands per ASTM B355 Class 7. CMA 640. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material. For compatible insulations, see MIL-S-83519/2 or consult Raychem. 2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem Specification RT-1404 and MIL-S-83519/2 which do not require electrical testing while parts are immersed in water. 3. Temperature range: -55C to +150C. 4. Parts shall be marked with identification code per table. For best results, prepare the cable as shown: TITLE: Raychem Corporation THERMOFIT 300 Constitution Drive SOLDERSLEEVE* DEVICE DEVICES Menlo Park, CA 94025 SHIELD TERMINATION WITH BRAID USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO.: S03-XX-R-100HN INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A Raychem reserves the right to amend this DCR NUMBER: REPLACES: 0.00 N/A drawing at any time. Users should evaluate D990967 N/A 0.0 N/A ROUGHNESS IN the suitability of the product for their 0 N/A MICRON application. DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: SIZE: SHEET: M. FORONDA 12/03/99 SEE TABLE 0 None A 1 of 1 * A trademark of Raychem Corporation. If this document is printed it becomes uncontrolled. Check for the latest revision.