SL630-C01 TE Connectivity

SL-630 SERIES SPECIFICATIONS High/low liquid level monitor Peel and stick to the outside of a wide range of plastic containers Never comes in contact with liquid no risk of contamination or volume displacement Proven ultrasonic technology Repeatability: 0.1 (2.54 mm) The Non-Invasive Sonic Eye SL-630 is a cost effective ultrasonic sensor for plastic containers. The sensor is designed to adhere to the outside of plastic containers with diameters from 2 (50.8mm) to 10 FEATURES (254mm) with a wall thickness up to 0.25 (6.35mm) as a high/low level liquid level monitor. The sensor sticks to the No calibration required outside of the container, never coming in contact with the Non-invasive miniature sensor designed liquid, so there is no contamination or volume to stick to outside of container displacement. Integral electronics with disposable mounting Effective on plastic bottles with diameters ranging from 2 (50.8 mm) to 10 (254 mm) Independent of color, transparency, shape and size of bottom of container No displacement of liquid volume Eliminates fluid contamination problem APPLICATIONS Chemical Analyzer Immuno Chemistry Chromatography Kidney Dialysis Clinical Chemistry Medical Laser System Hemodialysis Semiconductor Waste Management SENSOR SOLUTIONS /// SL-630 Series 06/2017 Page 1 SL-630 SERIES PERFORMANCE SPECIFICATIONS Parameter Typical Value Parameter Typical Value Repeatability 0.1 (2.54 mm) Protection Transient, reverse polarity Effective Plastic Response Time 200 milliseconds 2 (50.8 mm) to 10 (254 mm) Bottle Diameter Input Power 5 to 24 VDC Wall Thickness Up to 0.25 (6.35 mm) Leakage Current Less than 50 A Sensor Material ULTEM (plastic) Output TTL (high) dry condition Temperature -20 to 158 F (30 to 70 C) Reusable sensor/disposable 12 (305 mm) (for longer lengths Mounting Cable Length mounting tape consult factory) MECHANICAL DIMENSIONS IN INCHES 0.544 0.544 1.151 Disposable Peel and Stick Coupling Figure 1: SL-630 series element with peel and stick disposable mounting tape. NOTES: Clean area on container before installing. Remove backing from tape and adhere to container. Press sensor to container firmly SENSOR SOLUTIONS /// SL-630 Series 06/2017 Page 2