Potter & Brumfield Solid State Relay SSRK Series 10-30A DIN Mount Solid State Relay With Paired SCR Output, Integral Heatsink File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Engineering Data Features Form: 1 Form A (SPST-NO). Narrow (22.5mm), DIN mount design with integral heatsink. Duty: Continuous. Choice of 10, 20 or 30A rms inverse-parallel connected SCR output. Isolation: 4000V rms input-to-output-to-ground. 24-240VAC and 48-660VAC output types. 9 Insulation Resistance: 10 Ohms, minimum, at 500VDC. 3 - 32VDC, 4 - 32VDC or 90 - 280Vrms input control. Capacitance: 8.0 pf maximum (input to output). 4000V rms optical isolation. Temperature Range: Green LED input status indicator. Storage: 30C to +100C Finger-safe (IP20) screw clamp terminals for load and control. Operating: 30C to + 80C Ground terminal. Case and Mounting: Refer to outline dimension drawing. Termination: Load & Control: Finger safe (IP20) screw clamps accepting wire size up to 10 AWG (3 mm). Ground: 10 screw with 5/16 in. hex/slottted head. Installation Spacing: Minimum 0.8 in (20 mm) space between units. Approximate Weight: 9.87 oz. (280g). Ordering Information SSRK 600 A Typical Part Number > 30 1. Basic Series: SSRK = Slim Solid State Relay with Integral Heatsink for DIN Rail Mounting 2. Line Voltage: 240 = 24 - 240 VAC 600 = 48 - 660 VAC 3. Input Type & Voltage: A = 90 - 280 VAC D = 3 - 32VDC for 240V / 4 - 32VDC for 600V 4. Maximum Switching Rating / Output: 10 = 10.0A rms 20 = 20.0A rms 30 = 30.0A rms Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRK-240A20 SSRK-240A30 SSRK-600A30 SSRK-240D20 SSRK-240D30 SSRK-600D30 Input Specifications DC Control Units Parameter Conditions AC Control Units 240 V 600V Control Voltage Range VIN 25C 90 - 280 Vrms 3 -32 VDC 4 -32 VDC Must Operate Voltage VIN(OP) (Min.) 25C 90 Vrms 3 VDC 4 VDC Must release Voltage VIN(REL) (Min.) 25C 10 Vrms 1 VDC 1 VDC Input Current Range(Typ.) 25C 7.5mA 120 Vrms, 16mA 240 Vrms 18mA 5Vdc 9.5 - 30 mA 1 02-2018, Rev. 0218 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company Potter & Brumfield Solid State Relay SSRK Series (Continued) SCR Output Modules Output Specifications ( +25C unless otherwise specified) Parameter Conditions Nom. Line Voltage Units 10A Rated Units 20A Rated Units 30A Rated Units 240 V model V rms 24 - 240 24 - 240 24 - 240 Load Voltage VL f = 47 - 63Hz 600 V model V rms 48 - 660 48 - 660 48 - 660 240 V model V peak 600 600 600 Repetitive Blocking Voltage (Min.) 600 V model V peak 1200 1200 1200 Load Current IL* 240 V & 600 V model A rms 0.15 - 10 0.15 - 20 0.15 - 30 240 V model A peak 83 300 800 Single Cycle Surge Current (Min.) 600 V model A peak 300 300 800 Leakage Current (Off-State) (Max.) f = 60Hz. - VL = 600Vrms 240 V & 600 V model mA rms 5 5 5 240 V model V peak 1.8 1.8 1.8 On-State Voltage Drop (Max.) IL=Max. 600 V model V peak 1.6 1.6 1.8 240 V model V/s 200 300 500 Static dv / dt (Off-State) (Min.) VL=Max. 600 V model V/s 300 300 500 Turn-On Time (Max.) 240 V & 600 V model ms 10 for DC Input Models, 40 for AC Input Models f = 60Hz. Turn-Off Time (Max.) 240 V & 600 V model ms 10 for DC Input Models, 80 for AC Input Models 240 V model As 41 510 3745 It Rating (Max.) t = 8.3 ms 600 V model As 510 510 3745 IL=Min. 240 V & 600 V model 0.5 0.5 0.5 Load Power Factor Rating (Min.) * See Derating curve Electrical Characteristics (Thermal Derating Curves) Outline Dimensions 2 02-2018, Rev. 0218 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company