SSRM Series Solid State Relays SSRM series 45-65A DIN Mount Solid State Relay With Paired SCR Output, Integral Heatsink File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to confirm the product meets the requirements for a given application. Features Engineering Data DIN mount design with integral heatsink. Form: 1 Form A (SPST-NO). Choice of 45, 55 or 65A rms inverse-parallel connected SCR output. Duty: Continuous. 48 - 660VAC output. Isolation: 4,000V rms input-to-output-to-ground. 9 4 -32VDC or 90 - 140Vrms input control. Insulation Resistance: 10 Ohms, minimum, at 500VDC. 4,000V rms optical isolation. Capacitance: 8.0 pf maximum (input to output). Green LED input status indicator. Temperature Range: Finger-safe (IP20) screw clamp terminals for load and control. Storage: 40C to +125C Ground terminal. Operating: 40C to + 80C Case and Mounting: Refer to outline dimension drawing. Termination: Control: Finger safe (IP20) screw clamps accepting wire size up to 12 AWG (2.5 mm). Load: Finger safe (IP20) screw clamps accepting wire size up to 8 AWG (3.8 mm). Ground: 10 screw with 5/16 in. hex/slottted head. Installation Spacing: Minimum 0.8 in (20 mm) space between units. Approximate Weight: 16.9 oz. (479 g). Ordering Information Sample Part Number SSRM -600 A 55 1. Basic Series: SSRM = Solid State Relay with Integral Heatsink for DIN Rail Mounting 2. Line Voltage: 600 = 48 - 660 VAC 3. Input Type & Voltage: A = 90 - 140VAC D = 4 - 32VDC 4. Maximum Switching Rating/Output: 45 = 45.0A rms 55 = 55.0A rms 65 = 65.0A rms Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRM-600A45 SSRM-600A55 SSRM-600A65 SSRM-600D45 SSRM-600D55 SSRM-600D65 Input Specifications Parameter Conditions AC Control Units DC Control Units 90 - 140 Vrms 4.0 - 32 VDC Control Voltage Range V IN 25C 32 VDC Reverse Voltage V (Max.) IN 25C Must Operate Voltage V (Min.) 90 Vrms 4.0 VDC 25C IN(OP) Must Release Voltage V (Min.) 25C 10 Vrms 1.0 VDC IN(REL) Input Current (Typ.) 25C 15 mA 120 Vrms 14 mA 5 VDC Input Current (Max.) 25C 30 mA Issued 4-09 Dimensions are in inches over Dimensions are shown for reference USA: 1-800-522-6752 South America: 55-11-2103-6000 www.tycoelectronics.com (millimeters) unless otherwise purposes only. Specifications and Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. availability subject to change. Mexico: 01-800-733-8926 Japan: 81-44-844-8013 1 1 C. America: 52-55-1106-0803 UK: 44-8706-080208I N P U T S SSRM Series Solid State Relays Output Specifications ( 25 C, unless otherwise specified) Parameter Conditions Units 45A Rated Units 55A Rated Units 65A Rated Units Load Voltage Range V f = 47 - 63 Hz. L V rms 48 - 660 48 - 660 48 - 660 Repetitive Blocking Voltage (Min.) V peak 1200 1200 1200 Load Current Range I * 0.15 - 45.0 0.25 - 55.0 0.25 - 65.0 L A rms Single Cycle Surge Current (Min.) A peak 625 1,000 1,200 Leakage Current (Off-State) (Max.) f = 60 Hz. V = 600Vrms mA rms 1.0 1.0 1.0 L Thermal Resistance Junction to Case R (Max.) C/W 0.63 0.31 0.28 JC On-State Voltage Drop (Max.) I = Max. V peak 1.7 1.7 1.7 L V = Max. 500 500 500 Static dv/dt (Off-State) (Min.) V/s L Turn-On Time (Max.) f = 60 Hz. ms 8.3 for DC Input Models, 10.0 for AC Input Models Turn-Off Time (Max.) f = 60 Hz. ms 8.3 for DC Input Models, 40.0 for AC Input Models 2 2 A Sec. 1,620 4,150 6,000 I t Rating (Max.) t = 8.3 ms Load Power Factor Rating (Min.) 0.5 0.5 0.5 I = Max. L *See Thermal Derating Curves. Electrical Characteristics (Thermal Derating Curves) 45 A 55 A 65 A 60 90 90 50 75 75 40 60 60 30 45 45 20 30 30 10 15 15 10 20 30 40 50 60 70 80 10 20 30 40 50 60 70 80 10 20 30 40 50 60 70 80 Ambient Temperature (C) Ambient Temperature (C) Ambient Temperature (C) Outline Dimensions 1.0 (25.4) MOUNTING HOLE 0.75 0.17 (4.3) DIA. (19.1) 3.5 (88.9) INPUT 3.0 (76.2) 2.5 (63.5) OUTPUT MOUNTING SLOT Disclaimer 0.17 x 0.20 (4.3 x 5.1) 1.75 3.0 (44.5) While Tyco Electronics has made every reasonable effort to ensure the (76.2) .9 accuracy of the information in this document, Tyco Electronics does not (22.9) guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the BLACK information contained herein at any time without notice. Tyco Electronics ANODIZED ALUMINUM expressly disclaims all implied warranties regarding the information 4.3 HEATSINK (109.2) contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult Tyco Electronics for the latest dimensions and design specifications. Recommended Torque Range for Terminal Screws: Control: 5 - 6 in lb (0.6 - 0.7 Nm). Output: 10 - 15 in lb (1.1 - 1.7 Nm). 2009 by Tyco Electronics Corporation. All Rights Reserved. TE logo and Tyco Electronics are trademarks. Catalog 8-1773454-5 Dimensions are in inches over Dimensions are shown for reference South America: 55-11-2103-6000 USA: 1-800-522-6752 Issued 4-09 (millimeters) unless otherwise purposes only. Specifications and Hong Kong: 852-2735-1628 Canada: 1-905-470-4425 specified. availability subject to change. Japan: 81-44-844-8013 Mexico: 01-800-733-8926 2 www.tycoelectronics.com UK: 44-8706-080208 C. America: 52-55-1106-0803 T A T U S Output Current (Arms) Output Current (Arms) Output Current (Arms)