SPECIFICATION CONTROL DRAWING Product Revisions Component Dimensions Shall Accommodate Cable With Dimensions Part Ident. B C D E F H L1.75 Name Code min min min max min max (L0.07) ST18-1-55-GA-CL * ST181R 16.5 1.9 2.65 8.25 2.65 0.90 1.9 (0.650) (0.075) (0.105) (0.325) (0.105) (0.035) (0.075) ST18-2-55-GA-CL * ST182R 16.5 2.65 3.68 8.25 3.68 1.40 2.65 (0.650) (0.105) (0.145) (0.325) (0.145) (0.055) (0.105) ST18-3-55-GA-CL * ST183R 16.5 4.3 5.08 8.25 5.08 2.15 4.3 (0.650) (0.170) (0.200) (0.325) (0.200) (0.085) (0.170) ST18-4-55-GA-CL * ST184R 19.1 5.95 6.45 8.25 6.45 3.30 5.95 (0.750) (0.235) (0.255) (0.325) (0.255) (0.130) (0.235) ST18-5-55-GA-CL * ST185R 19.1 7.0 7.6 8.25 7.6 4.30 7.0 (0.750) (0.275) (0.300) (0.325) (0.300) (0.170) (0.275) *For Prod. Revisions: see individual MCDs. MATERIAL 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Cd18 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI J-STD-004. 3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED LEAD: RAYCHEM 55A0111 in accordance with MIL-W-22759/32. Stranded tin plated copper. Color: see CL: lead colors available below. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 105C minimum, meeting the dimensional criteria listed and having tin or silver plated shields. 2. Temperature range: -55C to +125C. 3. When installed in accordance with Raychem Process Standard RCPS-100-70 assemblies will meet performance requirements of Raychem Specification RT-1404. Complete part number is defined as shown: ST18-X 55 GA CL Size Lead type Lead Wire Lead color designation per MIL-STD-681. 1 to 5 M22759/32 Gauge (AWG) Colors available: 20, 22,24,26 20AWG-black, green, white For best results, prepare the cable as shown: 22AWG-black, green, white 24AWG-black, green, blue, white 26AWG-black, green, white All gauges: White with a single black stripe. TITLE: THERMOFIT SOLDERSLEEVE DEVICE TERMINATION DEVICES 300 Constitution Drive WITH LEADS, LOW TEMPERATURE Menlo Park, CA 94025, USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. DOCUMENT NO.: ST18-X-55-GA-CL INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A Raychem reserves the right to amend this DCR NUMBER: REPLACES: 0.00 N/A drawing at any time. Users should evaluate D000227 D981079 0.0 N/A ROUGHNESS IN the suitability of the product for their 0 N/A MICRON application. DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: SIZE: SHEET: M. FORONDA 06-June-00 SEE TABLE 5 None A 1 of 1 If this document is printed it becomes uncontrolled. Check for the latest revision