TECHNICAL DATA SHEET TMS-90-SCE Document number: TTDS-212 Issue: 1 HEAT SHRINK MARKER SLEEVE Date: December 2011 Material Description: General purpose flame retarded, radiation cross-linked, modified polyolefin heat-shrinkable marker sleeve. Assembled as organized cut sleeves in a ladder configuration. 3:1 and 2:1 shrink ratio products available. Identification of wires and cables by computer-based printing onto sleeves. Use: Sleeves can also provide terminal insulation, strain relief and mechanical protection. Suitable for a wide variety of applications, including aerospace, military and rail applications. See document 411-121005 Customer printer ribbon matrix, for current Print Method/Ribbon: recommended printer / ribbon systems. 1 Sleeves may also be laser marked using the LMS 9000 1 Contact a TE Sales Engineer for further details -55C to +135C (-67F to +275F). Service Temperature: 40C (104F). Maximum Storage Temperature: 120C (248F) Minimum Recovery Temperature: White and Yellow. Colors: Storage life (pre-installation) shall be in compliance with AMS SAE 23053/5. Shelf Life 5 years when stored between 18C to 35C (64F to 95F). UL recognised standard 224 (File E35586). Specifications / CSA certified (File LR31929). Approvals: AMS SAE 23053/5 Class 1 NFF 00608 Cat A SAE AS 5942 Mark Adherence MIL 202F Method 215 Resistance to Solvents Author: L Smith / A F Kean Issue date: Dec 2011 Page: 1 of 3 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. TECHNICAL DATA SHEET TMS-90-SCE Document number: TTDS-212 Issue: 1 HEAT SHRINK MARKER SLEEVE Date: December 2011 PERFORMANCE: Physical Properties Tensile Strength: 10.3MPa minimum (SAE-AMS-DTL-23053/5). Ultimate Elongation: 200% minimum (SAE-AMS-DTL-23053/5). 2% Secant Modulus: 172.4MPa maximum (SAE-AMS-DTL-23053/5). Longitudinal Change: 5% (SAE-AMS-DTL-23053/5). Thermal Properties Heat Ageing: 100% UE retained and print legible after 336 hours at 175 C (347 F). Heat Shock: No cracking, dripping or flowing and print legible after 4 hours at 250 C (482 F). Low Temperature Flexibility: No cracking after 4 hours at -55 C (-67 F), followed by mandrel bend. Other Properties Resistance To Fungus: ISO EN 846 Method B: 56 days exposure. No change in mechanical and electrical properties. Print legible. Flammability: UL224 (C22.2 No. 198.1-99) Flame Test All Tubing FED STAN 228 method 5221 ASTM D876 Burn time 30 seconds maximum. No flag burn no burning of cotton or dripping. Water Absorption: 0.5% maximum (ASTM D570), 24hours at 23C. Dielectric Strength: 19.7MV/m minimum (ASTM D2671). Author: L Smith / A F Kean Issue date: Dec 2011 Page: 2 of 3 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.