Document number: TTDS-050 Issue: 4 Date: April 2011 TECHNICAL DATA SHEET DESCRIPTION TTMS (-2X) & TTMS-MP heat-shrinkable identification tubing APPLICATION / USE Thin wall flame retarded radiation cross-linked modified polyolefin heat- shrinkable tubing, flattened and spooled. Most sizes of TTMS & TTMS-MP tubing have a 3:1 shrink ratio TTMS-2X has a 2:1 shrink ratio, see tables 1 & 2 for details. Used in the identification of wires and cables by computer-based printing onto the tube. Tubing can also provide terminal insulation and strain relief. Suitable for a variety of applications, where wiring system complexity is relatively low. TTMS-MP variant is flattened to an oval shape for ease of installation RECOMMENDED PRINTER & RIBBONS New Applications Printer T2000CT-PRINTER or T6112DS-PRINTER (Optional cutter perforator) Ribbon 2000P-4TT (black) or 2000P-4AG (silver) and 2000P-WH (white) Legacy system Printer TMS-2000Plus printer, Ribbon 2000P-4TT (black) or 2000P-4AG (silver) and 2000P-WH (white) Software TE Connectivity WinTotal software v4.5 or later. APPROVALS Tubing meets the material and performance requirements of SAE AMS-DTL-23053/5 Classes 1 & 3. TTMS-2X product also meets dimensional UL recognized Standard 224 (File E35586). CSA certified (File 31929). See TE Connectivity specification RW 2517 for full performance & dimensional details. While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. Page 1 of 4 Document number: TTDS-050 Issue: 4 Date: April 2011 PRODUCT SIZE RANGE Table 1: TTMS and TTMS-MP Maximum Internal Wall Thickness Size Minimum Internal diameter after After Full Recovery TTMS- or diameter as supplied Full Recovery mm 0.08 TTMS-MP mm (inch) mm (inch) (inch 0.003) 2.4 2.4 (3/32) 0.79 (0.031) 0.58 (0.023) 3.2 3.2 (1/8) 1.06 (0.042) 0.58 (0.023) 4.8 4.8 (3/16) 1.57 (0.062) 0.58 (0.023) 6.4 6.4 (1/4) 2.11 (0.083) 0.58 (0.023) 9.5 9.5 (3/8) 3.17 (0.125) 0.61 (0.023) 12.7 12.7 (1/2) 4.21 (0.166) 0.61 (0.024) 19.0 19.0 (3/4) 6.35 (0.250) 0.61 (0.024) 25.4 25.4 (1.0) 8.45 (0.333) 0.64 (0.025) 38.1 38.1 (1.5) 19.0 (0.750) 0.51 (0.020) 50.8 50.8 (2.0) 25.4 (1.000) 0.64 (0.025) Table 2: TTMS-2X Maximum Internal Wall Thickness Minimum Internal Size diameter after After Full Recovery diameter as supplied TTMS-2X Full Recovery mm 0.08 mm (inch) mm (inch) (inch 0.003) 2.4 2.4 (3/32) 1.20 (0.047) 0.51 (0.020) 3.2 3.2 (1/8) 1.60 (0.063) 0.51 (0.020) 4.8 4.8 (3/16) 2.40 (0.094) 0.51 (0.020) 6.4 6.4 (1/4) 3.20 (0.125) 0.64 (0.025) 9.5 9.5 (3/8) 4.75 (0.187) 0.64 (0.025) 12.7 12.7 (1/2) 6.35 (0.250) 0.64 (0.025) 19.0 19.0 (3/4) 9.50 (0.374) 0.76 (0.030) While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE Connectivity does not guarantee that it is error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for the latest dimensions and design specifications. Page 2 of 4