Versafit V2
PBBs
Highly flame-retardant, low recovery
PBBOs
temperature, metric-sized heat-shrinkable tubing
Versafit V2 heat-shrinkable tubing is are classified as environmentally Bundles wires for very flexible
a cost-effective, environmentally hazardous substances. light-duty harnesses.
friendly choice for many commercial Strain-relieves electrical wire
applications. V2 tubing is made from Compared to noncrosslinked connections for long-term reliability.
a specially formulated, crosslinked materials, V2 tubing has a higher
polyolefin with low recovery temperature rating and exhibits better V2 tubing offers a faster, easier,
temperature, excellent flexibility, thermal stability and resistance to more reliable replacement for
and high flame-retardance (VW-1). physical abuse. molding in place, dip coating,
and tape wrapping.
Unlike other typical flame-retardant V2 tubing performs a variety of
tubings, V2 tubing is free of functions in commercial applications: V2 is UL-recognized and CSA-
polybrominated biphenyls (PBBs) Electrically insulates and protects certified at 125C, 600 V, with
and poly-brominated biphenyl oxides in-line components, disconnect UL VW-1 and CSA OFT flame-
(PBBOs). In Europe, these chemicals terminals, and splices. retardancy ratings.
Temperature rating
Full recovery temperature: 90C
Continuous operating temperature: 45C to 125C
Specifications*
Type Raychem UL CSA
Versafit RW-3023 E35586 VW-1 LR31929 VW-1
* When ordering, always specify latest issue.
Dimensions (millimeters)
W
Expanded as supplied
Fully recovered after heating
D d
As supplied Fully recovered As supplied Fully recovered
D Wall d (max.) W (min.) D Wall d (max.) W (min.)
Inside thickness Inside Wall Inside thickness Inside Wall
Size diameter (nominal) diameter thickness** Size diameter (nominal) diameter thickness**
1.0 1.6 0.2 0.20 0.50 0.33 11.0 11.4 0.3 0.30 5.5 0.56
1.5 2.1 0.2 0.20 0.75 0.35 12.0 12.7 0.3 0.30 6.0 0.56
2.0 2.6 0.2 0.25 1.00 0.43 13.0 13.5 0.3 0.35 6.5 0.66
2.5 3.1 0.2 0.25 1.25 0.43 14.0 14.4 0.4 0.35 7.0 0.68
3.0 3.6 0.2 0.25 1.50 0.43 15.0 15.7 0.4 0.35 7.5 0.68
3.5 4.1 0.3 0.25 1.75 0.43 16.0 16.9 0.4 0.35 8.0 0.68
4.0 4.6 0.3 0.25 2.00 0.43 18.0 19.0 0.4 0.40 9.0 0.76
5.0 5.6 0.3 0.30 2.50 0.56 20.0 21.4 0.4 0.40 10.0 0.76
6.0 6.6 0.3 0.30 3.00 0.56 22.0 23.2 0.4 0.45 11.0 0.89
7.0 7.6 0.3 0.30 3.50 0.56 25.0 26.8 0.4 0.45 12.5 0.89
8.0 8.6 0.3 0.30 4.00 0.56 27.0 28.2 0.5 0.45 12.5 0.89
9.0 9.6 0.3 0.30 4.50 0.56 28.0 30.0 0.5 0.45 14.0 0.89
10.0 10.4 0.3 0.30 5.00 0.56 30.0 32.1 0.5 0.45 15.0 0.89
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering information
Colors Standard Black
Nonstandard Red, blue, yellow, green, white, orange, brown, violet, gray
Size selection Always order the largest size that will shrink snugly over the component being covered.
Standard packaging On spools
Marking Marked with UL, CSA, and Japan -F- Mark legends.
Ordering description Specify product name, size, and color; for example, V2 2.0-0 (0=Black).Specification values
Property Unit Requirement Method of test
Physical Dimensions mm See reverse ASTM D 2671
Longitudinal change
ASTM D 2671 percent +1, 5 ASTM D 2671
UL 224 percent +3, 3 UL 224
Eccentricity (recovered) percent 30 maximum ASTM D 2671
Tensile strength MPa (psi) 10.3 (1500) minimum ASTM D 2671
Ultimate elongation percent 200 minimum ASTM D 2671
4
Secant modulus (as supplied) MPa (psi) 172 (2.5 x 10 ) maximum ASTM D 2671
Low-temperature flexibility No cracking UL 224
(1 hour at 30C/22F)
Heat shock No cracking UL 224
(4 hours at 250C/482F)
Heat aging UL 224
(7 days at 158C/316F)
Followed by tests for:
Tensile strength MPa (psi) 70% minimum UL 224
of unaged specimens
Ultimate elongation percent 100 minimum UL 224
Flexibility No cracking UL 224
Dielectric withstand seconds 60 minimum ASTM D 2671
at 2500 V
Dielectric breakdown volts 50% minimum ASTM D 2671
of unaged specimens
Dielectric strength kV/mm (volts/mil) 19.7 (500) minimum ASTM D 2671
Restricted shrinkage Pass UL 224
Electrical Dielectric withstand seconds 60 minimum ASTM D 2671
at 2500 V
Dielectric strength kV/mm (volts/mil) 19.7 (500) minimum ASTM D 2671
14
Volume resistivity ohm-cm 10 minimum ASTM D 2671
Chemical Corrosive effect No corrosion ASTM D 2671
(7 days at 158C/316F)
Copper stability No brittleness, glazing, ASTM D 2671
(7 days at 158C/316F) cracking, or severe
discoloration of tubing.
No pitting or blackening of copper.
Followed by test for:
Ultimate elongation percent 100 minimum ASTM D 2671
Flammability Pass UL 224, VW-1
Water absorption (recovered) percent 0.5 maximum ASTM D 2671
(24 hours at 23C/73F)
Fungus resistance ISO 846
Method B
Followed by tests for:
Tensile strength MPa (psi) 10.3 (1500) minimum ASTM D 2671
Ultimate elongation percent 200 minimum ASTM D 2671
Dielectric strength kV/mm (volts/mil) 19.7 (500) minimum ASTM D 2671
Note: Consult RW-3023 for specific details about test procedures.
Versafit and Raychem are trademarks of Tyco Electronics Corporation.
Users should independently evaluate the suitability of the product for their application.
Tyco Electronics Corporation
300 Constitution Drive Faraday Road 3816 Noborito, Tama-ku Asia Pacific Headquarters
Menlo Park, CA 94025-1164 Dorcan, Swindon, SN3 5HH Kawasaki, Kanagawa 214-8533 26 Ang Mo Kio, Industrial Park 2
USA United Kingdom Japan Singapore 569507
Tel:(800) 926-2425 (US & Canada) Tel: +44 1793 528171 Tel: +81 44 900 5102 Tel: +65 4866 151
Tel:+1 (650) 361-3860 (All other countries)
All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes
no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporations only obligations are those in the Standard Terms and
Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the
product. Tyco Electronics Corporations Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing
without notification to the Buyer which do not affect compliance with any applicable specification.
For more information about this product visit www.tycoelectronics.com
1995, 2002 Tyco Electronics Corporation Printed in USA 1654072 Revised 04/04