Signal Relays AXICOM W11 Relay V23101 n Multi purpose relay n Small size permitting high packing density n 1 form C contact (1 CO, 1 changeover contact) n 200mW and 450mW coils n 1A and 3A contacts n High shock resistance of 30g n Ambient temperature for sensitive version up to 85C n Immersion cleanable Typical applications Security devices, electric door openers, duplex intercommunication systems, measurement and controls Z AXICOM AXICOM Telecom-, Signal and RF Relays 108-98010 Rev. C Approvals Coil Data Telecom-, Signal and RF Relays 108-98010 Rev. C UL 508 File No. E 111441 Magnetic system neutral W11 Relay V23101 Technical data of approved types on request Coil voltage range 1.5 to 24VDC W11 Relay V23101 Max. coil temperature 130C Contact Data 1.25A 3A Thermal resistance < 125K/W Contact arrangementContact Data 1 form C (CO) Coil Operating Range Max. switching voltage 120VDC, 125VAC Coil versions, monostable Number of contacts and type 1 changeover contacts Rated current 1.25A 3A Coil Rated Operate Limiting Release Coil Rated coil Limiting continuous currContact assembly ent, 85C 1.25A 3A single contacts code voltage voltage Voltage voltage resistance power Unom = Nominal coil voltage 2.6 Switching powerContact material 30W, 62.5VA 72WAgPd, gold plate, 360VA d AgNiVDC VDC VDC VDC 200 mW coil10% mW min. max. min. Umax. = Upper limit of the operative range of 2.4 AgNi, gold plated Contact material AgPd, gold plated AgNi Standard coil, 450mW Umax. at 0 A the coil voltage (limiting voltage) 2.2 Limiting continuous current at max. ambient temperature 1.25 A3 A AgNi, gold plated 001 1.5 1.3 2.6 0.15U max. at 1.25 6 A 375 Uop. min. = Lower limit of the operative range of the Maximum switching current (see load limit diagram) 1.25 A32 A Min. recommended contact load 10mA at 20 mV 002 3 2.1 4.7 0.30 20 450 coil voltage (reliable operate voltage) Minimum switching voltageMaximum swichting voltage 100V 120 Vdc 003 120 Vd5 c 3.5 7.9 0.50 56 446 1.8 For latching relays Uset min. resp. Ureset min. 125 Vac 125 Vac Initial contact resistance 100m at 10mA, 20mV 004 6 4.2 9.5 0.60 80 450 1.6 Urel. min. = Lower limit of the operative range of Maximum switching capacity 30 W / 62.5 VA 72 W / 360 VA Frequency of operation, without load max. 20 operations/s 005 9 6.3 14.2 0.90 180 450 1.4 the coil voltage (reliable release voltage) Thermoelectric potential < 10 V < 10 V Operate / release time max. 7ms/5ms 006 12 8.4 19.0 1.20 320 450 1.2 Initial contact resistance / measuring condition: 10 mA / 20 mV 100 m 100 m Bounce time max., form A/form B 2/10ms 007 24 16.8 38.0 2.40 1280 450 1 Unom. nominal coil voltage Electrical endurance, Electrical endurance Sensitive coil, 200mW 5 standard: at 24 Vdc / 1.25 A min. 3 x 10 operations standard version 101 0.81.5 1.1 3.6 0.15 12 188 5 at 24 Vdc / 3 A min. 2 x 10 operations 5 at 24VDC / 1.25A min. 3x10 ops. 102 3 2.3 7.1 0.30 45 200 5 0.6 at 120 Vac / 1.25 A min. 1.5 x 10 operations Uop. min. 5 5 at 24VDC / 3A min. 2x10 ops. 103 5 3.8 11.6 0.50 120 208 at 120 Vac / 3 A min. 4 x 10 operations 0.4 Urel. min. 5 at 120VAC / 1.25A min. 1.5x10 ops. 104 6 4.5 14.2 0.60 180 200 0.2 5 5 sensitive: at 24 Vdc / 1.25 A min. 2 x 10 operations at 120VAC / 3A min. 4x10 ops. 105 9 6.8 21.2 0.90 400 203 5 at 24 Vdc / 3 A min. 1 x 10 operations 0 sensitive version 106 12 9.0 28.0 1.20 700 206 5 at 120 Vac / 1.25 A min. 1 x 10 operations -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 5 at 24VDC / 1.25A min. 2x10 ops. 107 245 18.0 56.0 2.40 2800 206 at 120 Vac / 3 A min. 3 x 10 operations Ambient Temperature C 5 at 24VDC / 3A min. 1x10 ops. 108 18 13.5 33.0 1.80 1620 200 5 7 All figures are given for coil without pre-energization, at ambient temperature +23C. Mechanical endurance, typat 120VAC / 1.25A min. 1x10 ops. 10 operations 5 at 120VAC / 3A min. 3x10 ops 2.6 6 Mechanical endurance typ. 10x10 operations 450 mW coil 2.4 Max. DC Load Breaking Capacity 2.2 Umax. at 0 A Umax. at 1.25 A Max. DC load breaking capacity 2.0 1.8 1.6 1.4 1.2 Unom. nominal coil voltage 1.0 0.8 Uop. min. 0.6 Urel. min. 0.4 0.2 0.0 -40-30 -20-10 0102030405060708090100 Ambient Temperature C DC current A 1 07-2015, Rev. 0715 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company AXICOM Telecom-, Signal and RF Relays 108-98010 Rev. C Signal Relays AXICOM W11 Relay V23101 W11 Relay V23101 (Continued) Coil Operating Range Coil Data (continued) Insulation Data Unom = Initial dielectric strNominal coil voltageength 2.6 200 mW coil between open contacts 750Vrms Umax. = Upper limit of the operative range of 2.4 Umax. at 0 A between contact and coil 1000Vrms the coil voltage (limiting voltage) 2.2 Umax. at 1.25 A Initial insulation resistance at 500VDC > 109 Uop. min. = Lower limit of the operative range of the 2 Capacitance coil voltage (reliable operate voltage) 1.8 between open contacts max. 2pF For latching relays Uset min. resp. Ureset min. 1.6 between contact and coil max. 10pF Urel. min. = Lower limit of the operative range of 1.4 the coil voltage (reliable release voltage) 1.2 Other Data 1 Unom. nominal coil voltage Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 0.8 AXICOMAXICOM refer to the Product Compliance Support Center at 0.6 Telecom-, Signal and RF Relays 108-98010 Rev. C Telecom-, Signal and RF Relays www.te.com/customersupport/r108-98010 Reohssupportcenterv. C Uop. min. AXICOMAXICOM 0.4 Urel. min. Ambient temperature -40 to +85C Telecom-, Signal and RF RelaysTelecom-, Signal and RF Relays 108-98010 Re108-98010 Rev. C v. C W11 RelaCategory of enviry V23101onmental protection W11 Relay V23101 0.2 IEC 61810 RT III - wash tight 0 W11 RelaW11 Relay V23101y V23101 Vibration resistance (functional) 10g, 10 to 200Hz -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature C Shock resistance (functional) Terminal assignmentTerminal assignment IEC 60068-2-27 (half sine) 30g Coil operative range graphs Shock resistance (destructive) 100g DimensionsDimensions Dimensions in mmDimensions in mm Relay top view U Nominal coil voltage2.6 Relay top view Terminal type PCB-THT nom 450 mW coil U Upper limit of the operative range of the coil voltage (limiting max Weight max. 4g 2.4 voltage) when coils are continously energized Resistance to soldering heat THT 2.2 V23101-D1 xxx-Axxx THT V23101-D0 xxxTHTUmax. at 0 A-Axxx V23101-D1 xxx-Axxx V23101-D0 xxx-Axxx U Lower limit of the operative range of op. min. IEC 60068-2-20 265C/10s V23101-Dxxx-XxxxV23101-Dxxx-XxxxUmax. at 1.25 A the coil voltage (reliable operate voltage) 2.0 Ultrasonic cleaning not recommended 6 pin version with symmetrical coil assignment 5 pin version with symmetrical coil assignment U Lower limit of the operative range of6 pin version with symmetrical coil assignment 5 pin version with symmetrical coil assignment rel. min. mm mm inch inch 1.8 Packaging/unit tube/25 pcs. the coil voltage (reliable release voltage) L 1.6 L 15.5 0.1 15.5 0.1 0.610 0.0040.610 0.004 box/625 pcs. W W 10.5 0.1AXICOM 10.5 0.1AXICOM0.413 0.0040.413 0.004 1.4 Telecom-, Signal and RF Relays 108-98010 Rev. C Telecom-, Signal and RF Relays 108-98010 Rev. C H 1H 1.5 - 0.2 11.5 - 0.2 0.453 - 0.0080.453 - 0.008 1.2 Unom. nominal coil voltage T T 3.5 - 0.2 3.5 - 0.2 0.138 - 0.0080.138 - 0.008 1.0 W11 Relay V23101 W11 Relay V23101 0.8 Uop. min. 0.6 THT VersionTHT Version Urel. min. 0.4 Terminal assignment Terminal assignment 0.2 0.0 15.50.1 15.50.1 10.50.1 10.50.1 Relay top view Relay top view -40-30 -20-10 0102030405060708090100 Terminal assignment Ambient Temperature C TOP view on component side of PCB V23101-D1 xxx-Bxxx V23101-D0 xxx-Bxxx V23101-D1 xxx-Axxx V23101-D1 xxx-Bxxx V23101-D0 xxx-Axxx V23101-D0 xxx-Bxxx V23101-D1 xxx-Axxx V23101-D0 xxx-Axxx 6 pin version with symmetrical 6 pin version with asymmetrical 5 pin version with symmetrical 5 pin version with asymmetrical coil assignment coil assignment coil assignment coil assignment 6 pin version with asymmetrical coil assignment6 pin version with asymmetrical coil assignment 5 pin version with asymmetrical coil assignment5 pin version with asymmetrical coil assignment 6 pin version with symmetrical coil assignment6 pin version with symmetrical coil assignment 5 pin version with symmetrical coil assignment5 pin version with symmetrical coil assignment V23101-D0xxx-Axxx V23101-D0xxx-Bxxx V23101-D1xxx-Axxx V23101-D1xxx-Bxxx Mounting hole laMounting hole layout yout View onto the component side of the PCB (top view)View onto the component side of the PCB (top view) V23101-D1 xxx-Bxxx V23101-D0 xxx-Bxxx V23101-D1 xxx-Bxxx V23101-D0 xxxPCB layout -Bxxx Version: 6 pinsTOP view on component side of PCBVersion: 6 pins Version: 5 pins (without pin noVersion: 5 pins (without pin no. 6) . 6) 6 pin version with asymmetrical coil assignment 5 pin version with asymmetrical coil assignment 6 pin version with asymmetrical coil assignment 5 pin version with asymmetrical coil assignment 6 pin version 5 pin version All specications subject to change. Consult Tyco Electronics for latest specications. 8 of 13 2 07-2015, Rev. 0715 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company