Series 2380 Programmable DC Electronic Loads Series 2380 programmable DC electronic loads can sink a wide range of voltages and currents. The 200W Model 2380-500-15 can accept up to 500V or 15A. The 250W Model 2380-120-60 can accept up to 120V or 60A. The 750W Model 2380- 500 30 can accept up to 500V or 30A. These single-output, stand-alone electronic loads are cost-effective and self-contained. Multiple Operating Modes These DC electronic loads can operate in constant current (CC), constant voltage (CV), constant resistance (CR), or constant power (CP) mode. They can also be configured to provide a dynamically changing load to the DC source with load switching times 200W, 250W, and 750W models as fast as 25kHz. Versatile internal, external, and remote triggering options allow synchronizing the dynamic load behavior with other events. Supports up to 500V or 60A Comprehensive Protection Constant current (CC),constant voltage (CV), constant resistance Protection functions built into Series 2380 DC electronic loads ensure the reliability (CR), and constant power (CP) and safety of all tests. These functions include over temperature protection (OTP), operating modes over voltage protection (OVP), over current protection (OCP), over power protection (OPP), and local/remote reverse voltage (LRV/RRV) protection. A power-on system LED simulated load test mode self-test ensures the instrument is operating properly. Readback voltage and current resolution down to 0.1mV/0.01mA Full Complement of Settings and Controls Dynamic mode with cycle rate up To maximize testing efficiency, you can save test parameters into any one of 100 memory locations for quick recall. All load parameters, such as voltage, to 25kHz current, slew rate, and dynamic mode time intervals, can be set using the front Voltage rise and fall time panel controls or programmed remotely. A numeric keypad and rotary knob measurement allow entering settings quickly and setting parameters to their full resolution Current monitor function easily. USB-TMC, GPIB and RS-232 interfaces are built in for remote control and communication. A current monitor interface simplifies monitoring input current List mode waveforms by providing a connection for an oscilloscope. Battery test mode Built-in GPIB,USB, and RS-232 interfaces Figure 1. Use either the rotary knob or the keypad to quickly enter settings and set parameter values using all the available resolution. A Tektronix Company Programmable DC electronic loads DC POWER SUPPLIES Programmable DC Electronic Loads 2380 Programmable DC Electronic Loads Ordering Information 2380-500-15 Programmable DC Electronic Load, 500V, 15A, 200W 2380-120-60 Programmable DC Electronic Load, 120V, 60A, 250W Model 2380-500-15 rear panel Model 2380-500-15 front view showing the safety 2380-500-30 covers on the input terminals. Programmable DC Electronic Load, 500V, 30A, 750W 2380J-500-15 Programmable DC Electronic Load, 500V, 15A, 200W-Japan only 2380J-120-60 Programmable DC Electronic Load, 120V, 60A, 250W-Japan only 2380J-500-30 Programmable DC Electronic Load, 500V, Model 2380-500-30 rear panel 30A, 750W-Japan only ACCESSORIES AVAILABLE SERVICES AVAILABLE 2380-001 9-pin Rear Panel Mating Connector Model Number*-1-EW Accessories Supplied 3-year factory warranty from date of shipment 2380-002 DUT Connection Protective Cover extended 1 additional year Quick Start Guide 7007-2 Double-Shielded Premium IEEE-488 Interface Model Number*-5Y-EW Documentation CD Cable, 2m (6.5 ft) 3-year factory warranty from date of shipment KP-CL-488LPA IEEE-488.2 Interface Board for the PCI Bus extended to 5 years Power cord USB-B-1 USB Cable, Type A Connector to Type B C/Model Number*-3Y-STD Connector, 1m (3.3 ft) KeithleyCare 3 YR STD Calibration Plan C/Model Number*-3Y-DAT RACK MOUNT KITS FOR THE 2380-500-15 AND KeithleyCare 3 YR Calibration w/Data Plan THE 2380-120-60 APPLICATIONS C/Model Number*-5Y-STD 4299-7 Universal Fixed Rack Mount Kit KeithleyCare 5 YR STD Calibration Plan Environmental test, stress test, RMU2U Fixed Rack Mount Kit C/Model Number*-5Y-DAT and accelerated life testing 386759800 RMU2U Rack Mount Cosmetic Filler Panel KeithleyCare 5 YR Calibration w/Data Plan for AC/DC power sources and * Replace the specific power supply model number in place RACK MOUNT KIT FOR THE 2380-500-30 of Model Number to generate the appropriate model DC/DC modules 2380-RM Full-Rack-Width Instrument Fixed number for a service item. Example for a 2380-500-15, Rack Mount Kit a 1-year extended warranty model number would be LED lighting drivers and high 2380-500-15-EW. power component testing Automotive electronics testing Battery research and discharge testing Production test A Tektronix Company Programmable DC Electronic Loads DC POWER SUPPLIES