STP-36 Tektronix

Screw Terminal Accessory Boards STA-3108-D1: Adapter panel that adapts the CONN-3160-D1: Screw Terminal Panel. The STA-50: The STA-50 is a universal 50-pin screw 36-pin connector (from the KPCI-3130 or CONN-3160-D1 Adapter Panel brings all KPCI- terminal board. Two 50-pin male connectors KPCI-3132 digital I/O port) of the CAB-1284CC 3160 digital I/O signals out to an external panel and a user breadboard area are provided. The cable to a 50-pin header (mounted on the via 50-pin headers. This panel allows connection signals on the two connectors are tied together STA-3108-D1) with signals arranged for use with of the ADP-5037 to allow the KPCI-3160 to oper- and brought out to screw terminals. Requires a KPCI-PIO96 accessories. ate the SRA-01 or ERA-01, ERB-24 or SSIO-24 CACC-2000 cable. relay products or to allow digital connections Dimensions: 13.2cm 17.0cm 5.8cm via the STP-50 or STA-50 Screw Terminal Panel and accessory boards. Requires the CAB-1800 or CAB-1800/S cable. Dimensions: 5.2L 6.7W 2.3H STA-MB: The STA-MB Screw Terminal Accessory provides sockets for 4 MB-Series modules. Two parallel 37-pin D male connectors provide STA-300: Screw Terminal Accessory. Mounts on interfaces for DAS boards and accessories. The a panel and includes nylon standoffs for tabletop MB-Series module inputs and outputs as well as applications. Requires a CAB-305 cable. the I/O connector pins are brought out to screw kUSB-ST: Extra screw terminal blocks. For use terminals. You then wire the MB-Series outputs with KUSB-3102, -3108. to pins on the I/O connectors according to the req uirements of your application. STA-1800HC: The STA-1800HC is a dedicated screw terminal accessory for the DAS-1800HC. All I/O connections on the DAS-1800HC are brought out to labeled screw terminals. For ease kUSB-STP100: Screw terminal panel with 100- of wiring differential inputs, each channel has pin, male, D-type connector. This screw terminal an adjacent ground connection. A CJC sensor panel will only work with the KUSB-CABDIO. with terminal blocks is included to facilitate the For use with KUSB-3160. measurement of thermocouples with the DAS- STA-U: The STA-U is a universal screw terminal 1801HC. Four 37-pin D-type male connectors are accessory designed to connect to many Keithley available for connecting external accessories. Up data acquisition boards. It includes one 25-pin to 2 MB01 backplanes can be accommodated. female D-type connector and two 37-pin male A breadboard area with power connections is D-type connectors tied together. All 37 lines are available for custom circuitry. brought out to screw terminal connections. A Dimensions: 16.0 4.75 (40.6cm 12.1cm) small breadboard area is available for additional circuitry. The STA-U is used for direct connec- 1.888.KEITHLEY (U.S. only) www.keithley.com A G R E A T E R M E A S U R E O F C O N F I D E N C E Connection accessories DATA ACQUISITION PRODUCTS Connection accessoriesScrew Terminal Accessory Boards tion to data acquisition boards or it can be used STP-37/FC: Screw Terminal Panel with female in conjunction with an expansion accessory such D37 connector. The STP-37/FC brings the signals as the EXP-GP to provide connection to the sig- out to external screw terminals on an encased nals not available on the expansion accessory. panel. The female D37 connector prevents user voltages from being exposed when the cable is Dimensions: 5.2L 6.7W 2.3H unplugged. Requires a C-3200 or C1800/M cable. DI N r a i l compat i ble. Dimensions: 4.9 3.1 1.25 (12.4cm 7.9cm 3.2cm) STP-100: Screw Terminal Panel with 100-pin male D-type connector. The STP-100 brings signals out to numbered screw terminals. Requires a CAB-1800 cable. Compatible with STC-37: Direct Screw Terminal Connector (37 DAS-1800HC and KPCI-1800HC boards. pin). The STC-37 plugs directly onto the I/O Dimensions: 5.5 7.0 1.5 (12.4cm 7.9cm 3.2cm) connector at the back of the PC. All lines are brought out to screw terminals. STP-100U: Accessory for KPCI-3160. Provides STP-50: Screw Terminal Panel with 50-pin Dimensions: 2.5L 4.75H 0.75W (6.4cm 12.1cm 1.9cm) direct digital connections from the KPCI-3160 to male header. The STP-50 brings signals out access all digital I/O signals. to screw terminals. Requires a CDAS-2000 or CACC-2000 cable. Dimensions. 6.1 2.9 1.25 (15.5cm 7.4cm 3.2cm) STP-50/C: Screw Terminal Panel with case and 50-pin male header. DIN rail compatible. Dimensions: 6.2 3.1 1.5 (15.7cm 7.9cm 3.8cm) STP-36: Screw Terminal Panel. The STP-36 brings all KPCI-3130/3132, KPCI-PDISO8A, or KPCI-PIO32IOA signals out to external screw ter- minals. The standard versions come with rubber STP-3110: Screw Terminal Panel. Mounts on a standoffs, making the STP-37 ideal for placing panel and includes nylon standoffs for tabletop on a desktop or mounting in custom panels. applications. For use with KPCI-3110 and -3116 Requires a CAB-1284CC-.5 half-meter cable or data acquisition boards. CAB-307 and CAB-308 CAB-1284CC-2 two-meter cable. cables are required. STP-68: Screw Terminal Panel. The STP-68 brings all signals out to external screw terminals. Requires a CAB-305 cable. Not CE approved. STP-37: Screw Terminal Panel with 37-pin male D-type connector and CJC sensor. The STP-37 is a cost-effective means of providing general-pur- STP-3140: Screw Terminal Panel. Brings all KPCI- pose screw terminal connections and CJC sen- 3140 signals out to external screw terminals. The sor. Requires a C1800 or S1800 cable. STP-3140 comes with nylon standoffs, making Dimensions: 4.8 2.9 1.25 (12.2cm 7.4cm 3.2cm) it ideal for placing on a desktop or mounting in custom panels. Requires CAB-305 cable (1m/39). 1.888.KEITHLEY (U.S. only) www.keithley.com A G R E A T E R M E A S U R E O F C O N F I D E N C E DATA ACQUISITION PRODUCTS Connection accessories Connection accessories