C3P24D25 Teledyne

Series C3P24D25C Three-Phase Output to 25A 280 Vac DC Control Part Number Description C3P24D25 25A, 280 Vac C3P24D25C 25A, 280 Vac Part Number Explanation FEATURES/BENEFITS Three-phase solid state relay in a compact SIP package NOTES High-temperature plastic housing for mechanical 1) Line Voltage (nominal): 48 = 480 Vac ruggedness 2) Switch Type: D = Zero-cross turn-on 3) Thermal Pad: -12 (ex: C3P24D25C-12) Tight zero-cross window for low EMI Exposed ceramic baseplate for reduced thermal MECHANICAL SPECIFICATION resistance 0.193 (4.90) 2.8 DESCRIPTION (71.12) The Series C3P three-phase AC solid-state relays are .500 (12.7) C3P24D25C designed to control medium amounts of power in three- 0.150 SOLID STATE RELAY FRANCE 1.090 (3.81) (27.69) phase applications. Optical isolation ensures complete CONTROL OUTPUT 24-280VAC/25A 3.5-10VDC PHASE 1 PHASE 2 PHASE 3 12 12 12 +- protection of the C3Ps control circuit from load transients. MAX 0.140 (3.6) OF CERAMIC The C3Ps compact plastic housing provides a low-cost 0.500 (12.70) alternative to large metallic threephase contactors. The 0.050 X 0.020 THICK 0.425 (1.27 X 0.51) (10.8) C3P is designed with heatsinking in mind. The ceramic 0.039 (1) baseplate provides excellent thermal performance. The 0.150 TYP. 0.450 0.450 (11.43) (11.43) (3.81) relays tight zero-cross window greatly reduces EMI. 3.200 0.325 (81.28) (8.26) APPLICATIONS Heating control WEIGHT: 1.093 oz. (31g) HVAC controls Figure 1 Dimensions in inches mm Light/Lamp control Three-phase AC loads INPUT (CONTROL) SPECIFICATION Min Max Units Control Range C3P24D25 10 30 Vdc CONTROL CHARACTERISTIC C3P24D25C 3.5 10 Vdc 35 30 Input Current Range 9 30 mA C3P24D25C 25 Must Turn-Off Voltage 1 Vdc 20 Input Internal Resistor (Typical) 250 C3P24D25 Input Resistance (See Figrue 2) 15 10 Reverse Voltage Protection 5 C3P24D25 30 Vdc 0 0 2 4 6 8 1012141618202224262830 C3P24D25C 10 Vdc Control Voltage (V) Figure 2 2016 TELEDYNE RELAYS (800) 284-7007 www.teledynerelays.com C3P24D25C 1 C3P24D25C 112016 Q4 Input Current (mA)Series C3P24D25C Three-Phase Output to 25A 280 Vac DC Control OUTPUT (LOAD) SPECIFICATION THERMAL CHARACTERISTICS 0.75C/W 95 95 Min Max Units 3 Phases 90 90 1C/W 85 85 Operating Range 24 280 Vrms 80 80 75 75 Peak Voltage 600 Vpeak 70 70 1.5C/W 2 Phases 65 65 60 60 Load Current Range .05 25 Arms 55 55 2C/W 50 50 (See Figure 4) 45 45 40 40 35 35 Maximum Surge Current Rating (Non-Repetitive) 1Phase 30 30 4C/W 25 25 (See Figure 5) 250 A 20 20 15 15 On-State Voltage Drop 0.81 + (0.018 x I) V 10 10 5 5 00 00 Zero-Cross Window (Typical) 12 V 00 2 4 6 8 10 12 14 16 18 20 22 24 00 10 20 30 40 50 60 70 80 90 100 Load Current (A) Ambient Temperature (C) Off -State Leakage Current (60 Hz) 1 mA Figure 4 Turn-On Time 8.3 ms Turn-Off Time 8.3 ms SURGE CURRENT Off -State dv/dt 500 V/s Operating Frequency Range 47 2000(*) Hz 2 2 I t for Match Fusing (<8.3 ms) 260 A S Thermal Resistance (One phase) R /c thj Junction-Case 0.85 C/W 250 ENVIRONMENTAL SPECIFICATION Min Max Units Operating Temperature -40 100 C Storage Temperature -55 100 C Input-Ouput Isolation 2500 Vi 1 10 100 Output-Case Isolation 2500 Vi Number of Equal Amplitude Current Pulses at 60Hz Rated Impulse Voltage 2500 V Figure 5 BLOCK DIAGRAM RECOMMENDED OUTPUT VOLTAGE PROTECTION A1 Ph DETECTION/ POLE A CONTROL AC CIRCUIT A2 + Ic Rc AC voltage Uc protection + B1 by VDR on OPTO DETECTION/ - VDC the PCB POLE B ISOLATED CONTROL Input AC AC CONTROL CIRCUIT B2 C1 Load DETECTION/ POLE C CONTROL AC CIRCUIT Figure 6 C2 An external Voltage Dependent Resistor (VDR) is recommended in case of Figure 3 voltage spike. NOTES NOTES 1. Electrical specifi cations at 25 C unless otherwise specifi ed. (*) Relay built with back-to-back thyristors and high performance optocouplers. Relays have been tested at Teledyne Relays with frequencies 2. See fi gure 6 for output protection recommendation higher than 2000 Hz on a resistive load. For other loads the user will have to check functionality in fi nal application. 3. For additional/custom options, contact factory C3P24D25C 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2016 TELEDYNE RELAYS C3P24D25C 112016 Q4 Power Dissipation (W) Max On-State Surge Current (Arms)