Series CCR-33M/CR-33M
Miniature DC3 GHz
COAX SWITCHES
Latching SPDT Coaxial Switch
PART NUMBER DESCRIPTION
CCR-33M Commercial Latching SPDT, DC-3GHz
CR-33M Elite Latching SPDT, DC-3GHz
Available with
The CCR-33M/CR-33M is a broadband, SPDT, electromechanical, coaxial switch designed to switch
USB & Ethernet
Control!
a microwave signal from a common input to either of two outputs. The characteristic impedance is 75
Ohms. The small switches incorporate mini-SMB connectors.
The CCR-33M/CR-33M series switch is offered with a latching actuator. This design is compatible with
the two most common mounting hole patterns. The CCR-33M/CR-33M series switch is interchangeable
with a variety of switches.
ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
Operating Temperature
Form Factor SPDT,
Commercial Model, CCR-33M 40C to 65C
break before make
Elite Model, CR-33M*** 55C to 85C
Frequency Range
Vibration (MIL-STD-202 Method 214, 10 gs RMS
CCR-33M DC3 GHz
Condition D, non-operating)
CR-33M DC3 GHz
Shock (MIL-STD-202 Method 213, 500 gs
Characteristic Impedance 75 Ohms
Condition D, non-operating)
Operate Time 10 ms (max.)
Standard Actuator Life 5,000,000 cycles
Actuation Voltage Available 12 15 24 28 V
Actuator Life w/ Additional Features 1,000,000 cycles
Actuation Current, max. @ ambient 140 170 90 65 mA
Connector Type mini-SMB
Humidity (Moisture Seal) Available
Weight 1.65 oz. (46.78g) (max.)
TYPICAL PERFORMANCE CHARACTERISTICS
Frequency DC1 GHz 12 GHz 23 GHz
Insertion Loss, dB, max. 0.2 0.3 0.3
Isolation, dB, min. 70 65 65
VSWR , max. 1.2:1 1.3:1 1.3:1
For maximum limits, please see charts on page 3-5
PART NUMBERING SYSTEM
CCR-33 M 6 C - T **
Series Options
Connectors Actuator Type
Actuator Voltage
Connector Options
Connector Actuator Voltage
Actuator Type T: TTL Drivers with Diodes
M: mini-SMB Female 6: 28 Vdc Latching
0: Standard Contacts D: Transient Suppression
7: 15 Vdc Latching
C: Indicator Contacts*** Diodes
8: 12 Vdc Latching
D: Self Cutoff Only R: Positive + Common
9: 24 Vdc Latching
E: Indicators and Self Cutoff*** N: Narrow Body
M: Moisture Seal
**SEE PARTS LIST ON PAGES 7-8 S: 9 Pin D-Sub Connector
For other options, contact factory. *** Indicator Contacts Operating Temperature
-50C to 85C (Elite Model Only)
2019 TELEDYNE RELAYS (800) 284-7007 www.teledynecoax.com CCR-33M/CR-33M Page 1
CCR-33M\CR-33M\022019\Q1Series CCR-33M/CR-33M
Miniature DC3 GHz
COAX SWITCHES
Latching SPDT Coaxial Switch
SCHEMATICS AND MECHANICAL OUTLINE
2X SOLDER TERMINALS
SOLDER WIRE MAXIMUM
TEMP 250C FOR NO
MORE THAN 5 SEC
Indicators TTL Analog
Standard
Width Body
H = 1.30 MAX. STD MODEL
H = 1.80 MAX. TTL MODEL
2X SOLDER TERMINALS
2X SOLDER TERMINALS
SOLDER WIRE MAXIMUM
SOLDER WIRE MAXIMUM
TEMP 250C FOR NO
TEMP 250C FOR NO
MORE THAN 5 SEC
MORE THAN 5 SEC
H= 1.30 MAX. STD MODEL
H= 1.80 MAX. TTL MODEL
H= 1.30 MAX. STD MODEL
H= 1.80 MAX. TTL MODEL
Optional Narrow
Width Body
1 H = 1.30 MAX. STD MODEL
Standard
H = 1.80 MAX. TTL MODEL
6
Width Body
H = 1.30 MAX. STD MODEL
H = 1.80 MAX. TTL MODEL
P/N 2706650
-s option 9-pin 2X d -SOLDER TERMINALSsub orconnect (example : ccr -33m 60-s )
SOLDER WIRE MAXIMUM
TEMP 250C FOR NO
MORE THAN 5 SEC
9 PIN D-SUB PINOUT FOR LATCHING SPDT
TRUTH TABLE (with TTL option)
OPTIONS
Indicator
Logic Input RF Path
Pin Indicators &
(if applicable)
Basic Indicators TTL
No. TTL
1
1 2 IN IN A B
1 1 1
9
to 1 to 2
2 2 2
0 0 No Change
3 C C Common Common
P/N 2707572
1 0 On Off C 0
4 1 1
5 2 2
0 1 Off On 0 C
6 Vsw Vsw
1 1 Forbidden
7 A A
8 B B
1 5
Optional Narrow
6 10
9 C C
Width Body 11 15
H = 1.30 MAX. STD MODEL
H = 1.80 MAX. TTL MODEL
CCR-33M/CR-33M Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2019 TELEDYNE COAX SWITCHES
AMPHENOL P/N
P-17EHD-015P
CCR-33M\CR-33M\022019\Q1