Series CCR-33M/CR-33M Miniature DC3 GHz COAX SWITCHES Latching SPDT Coaxial Switch PART NUMBER DESCRIPTION CCR-33M Commercial Latching SPDT, DC-3GHz CR-33M Elite Latching SPDT, DC-3GHz Available with The CCR-33M/CR-33M is a broadband, SPDT, electromechanical, coaxial switch designed to switch USB & Ethernet Control a microwave signal from a common input to either of two outputs. The characteristic impedance is 75 Ohms. The small switches incorporate mini-SMB connectors. The CCR-33M/CR-33M series switch is offered with a latching actuator. This design is compatible with the two most common mounting hole patterns. The CCR-33M/CR-33M series switch is interchangeable with a variety of switches. ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Operating Temperature Form Factor SPDT, Commercial Model, CCR-33M 40C to 65C break before make Elite Model, CR-33M*** 55C to 85C Frequency Range Vibration (MIL-STD-202 Method 214, 10 gs RMS CCR-33M DC3 GHz Condition D, non-operating) CR-33M DC3 GHz Shock (MIL-STD-202 Method 213, 500 gs Characteristic Impedance 75 Ohms Condition D, non-operating) Operate Time 10 ms (max.) Standard Actuator Life 5,000,000 cycles Actuation Voltage Available 12 15 24 28 V Actuator Life w/ Additional Features 1,000,000 cycles Actuation Current, max. ambient 140 170 90 65 mA Connector Type mini-SMB Humidity (Moisture Seal) Available Weight 1.65 oz. (46.78g) (max.) TYPICAL PERFORMANCE CHARACTERISTICS Frequency DC1 GHz 12 GHz 23 GHz Insertion Loss, dB, max. 0.2 0.3 0.3 Isolation, dB, min. 70 65 65 VSWR , max. 1.2:1 1.3:1 1.3:1 For maximum limits, please see charts on page 3-5 PART NUMBERING SYSTEM CCR-33 M 6 C - T ** Series Options Connectors Actuator Type Actuator Voltage Connector Options Connector Actuator Voltage Actuator Type T: TTL Drivers with Diodes M: mini-SMB Female 6: 28 Vdc Latching 0: Standard Contacts D: Transient Suppression 7: 15 Vdc Latching C: Indicator Contacts*** Diodes 8: 12 Vdc Latching D: Self Cutoff Only R: Positive + Common 9: 24 Vdc Latching E: Indicators and Self Cutoff*** N: Narrow Body M: Moisture Seal **SEE PARTS LIST ON PAGES 7-8 S: 9 Pin D-Sub Connector For other options, contact factory. *** Indicator Contacts Operating Temperature -50C to 85C (Elite Model Only) 2019 TELEDYNE RELAYS (800) 284-7007 www.teledynecoax.com CCR-33M/CR-33M Page 1 CCR-33M CR-33M 022019 Q1Series CCR-33M/CR-33M Miniature DC3 GHz COAX SWITCHES Latching SPDT Coaxial Switch SCHEMATICS AND MECHANICAL OUTLINE 2X SOLDER TERMINALS SOLDER WIRE MAXIMUM TEMP 250C FOR NO MORE THAN 5 SEC Indicators TTL Analog Standard Width Body H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL 2X SOLDER TERMINALS 2X SOLDER TERMINALS SOLDER WIRE MAXIMUM SOLDER WIRE MAXIMUM TEMP 250C FOR NO TEMP 250C FOR NO MORE THAN 5 SEC MORE THAN 5 SEC H= 1.30 MAX. STD MODEL H= 1.80 MAX. TTL MODEL H= 1.30 MAX. STD MODEL H= 1.80 MAX. TTL MODEL Optional Narrow Width Body 1 H = 1.30 MAX. STD MODEL Standard H = 1.80 MAX. TTL MODEL 6 Width Body H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL P/N 2706650 -s option 9-pin 2X d -SOLDER TERMINALSsub orconnect (example : ccr -33m 60-s ) SOLDER WIRE MAXIMUM TEMP 250C FOR NO MORE THAN 5 SEC 9 PIN D-SUB PINOUT FOR LATCHING SPDT TRUTH TABLE (with TTL option) OPTIONS Indicator Logic Input RF Path Pin Indicators & (if applicable) Basic Indicators TTL No. TTL 1 1 2 IN IN A B 1 1 1 9 to 1 to 2 2 2 2 0 0 No Change 3 C C Common Common P/N 2707572 1 0 On Off C 0 4 1 1 5 2 2 0 1 Off On 0 C 6 Vsw Vsw 1 1 Forbidden 7 A A 8 B B 1 5 Optional Narrow 6 10 9 C C Width Body 11 15 H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL CCR-33M/CR-33M Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2019 TELEDYNE COAX SWITCHES AMPHENOL P/N P-17EHD-015P CCR-33M CR-33M 022019 Q1