Series CCR-53S/CR-53S Miniature DC26.5 GHz COAX SWITCHES Latching SPDT Coaxial Switch PART NUMBER DESCRIPTION CCR-53S Commercial Latching SPDT, DC-26.5GHz CR-53S Elite Latching SPDT, DC-26.5GHz Available with The CCR-53S/CR-53S is a broadband, SPDT, electromechanical, coaxial switch designed to switch USB & Ethernet Control a microwave signal from a common input to either of two outputs. The characteristic impedance is 50 Ohms. The small switches incorporate SMA connectors. The CCR-53S/CR-53S series switch is offered with a latching actuator. This design is compatible with the two most common mounting hole patterns. The CCR-53S/CR-53S series switch is interchangeable with a variety of switches. ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Operating Temperature Form Factor SPDT, Commercial Model, CCR-53S 25C to 65C break before make Elite Model, CR-53S*** 55C to 85C Frequency Range Vibration (MIL-STD-202 Method 214, 10 gs RMS CCR-53S DC26.5 GHz Condition D, non-operating) CR-53S DC26.5 GHz Shock (MIL-STD-202 Method 213, 500 gs Characteristic Impedance 50 Ohms Condition D, non-operating) Operate Time 10 ms (max.) Standard Actuator Life 5,000,000 cycles Actuation Voltage Available 12 15 24 28 V Actuator Life w/ Additional Features 1,000,000 cycles Actuation Current, max. ambient 140 170 90 65 mA Connector Type SMA Humidity (Moisture Seal) Available Weight 1.65 oz. (46.78g) (max.) TYPICAL PERFORMANCE CHARACTERISTICS Frequency DC3 GHz 36 GHz 612 GHz 1218 GHz 18-22 GHz 22-26.5 GHz Insertion Loss, dB, max. 0.2 0.2 0.4 0.5 0.6 0.7 Isolation, dB, min. 70 70 60 60 50 50 VSWR , max. 1.25:1 1.25:1 1.4:1 1.5:1 1.6:1 1.8:1 For maximum limits, please see charts on page 3-5 PART NUMBERING SYSTEM CCR-53 S 6 C - T ** Series Options Connectors Actuator Type Actuator Voltage Connector Actuator Voltage Actuator Type Options S: SMA Female 6: 28 Vdc Latching 0: Standard Contacts T: TTL Drivers with Diodes 7: 15 Vdc Latching C: Indicator Contacts*** D: Transient Suppression 8: 12 Vdc Latching D: Self Cutoff Only Diodes 9: 24 Vdc Latching E: Indicators and Self Cutoff*** R: Positive + Common N: Narrow Body **SEE PARTS LIST ON PAGES 8-9 M: Moisture Seal S: 9 Pin D-Sub Connector For other options, contact factory. *** Indicator Contacts Operating Temperature -50C to 85C (Elite Model Only) 2019 TELEDYNE RELAYS (800) 284-7007 www.teledynecoax.com CCR-53S/CR-53S Page 1 CCR-53S CR-53S 022019 Q1Series CCR-53S/CR-53S Miniature DC26.5 GHz COAX SWITCHES Latching SPDT Coaxial Switch SCHEMATICS AND MECHANICAL OUTLINE Indicators TTL Analog Indicators 2X SOLDER TERMINALS TTL 2X SOLDER TERMINALSAnalog SOLDER WIRE MAXIMUM SOLDER WIRE MAXIMUM TEMP 250C FOR NO TEMP 250C FOR NO MORE THAN 5 SEC MORE THAN 5 SEC 2X SOLDER TERMINALS 2X SOLDER TERMINALS SOLDER WIRE MAXIMUM SOLDER WIRE MAXIMUM TEMP 250C FOR NO TEMP 250C FOR NO MORE THAN 5 SEC MORE THAN 5 SEC Mar16,2011 10:27am H = 1.30 MAX. STD MODEL H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL H = 1.80 MAX. TTL MODEL H = 1.30 MAX. STD MODEL H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL H = 1.80 MAX. TTL MODEL H= 1.30 MAX. STD MODEL H= 1.30 MAX. STD MODEL H= 1.80 MAX. TTL MODEL H= 1.80 MAX. TL MODEL Optional Narrow Width Body Standard Width Body Optional Narrow Width Body Standard Width Body 1 6 P/N 2706650 -s option 9-pin d -sub orconnect (example : ccr -53s 60-s ) 9 PIN D-SUB PINOUT FOR LATCHING SPDT TRUTH TABLE (with TTL option) OPTIONS Indicator Logic Input RF Path Pin Indicators & (if applicable) Basic Indicators TTL No. TTL 1 1 2 IN IN A B 1 1 1 9 to 1 to 2 2 2 2 0 0 No Change 3 C C Common Common P/N 2707572 1 0 On Off C 0 4 1 1 5 2 2 0 1 Off On 0 C 6 Vsw Vsw 1 1 Forbidden 7 A A 8 B B 1 5 6 10 9 C C 11 15 CCR-53S/CR-53S Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2019 TELEDYNE COAX SWITCHES AMPHENOL P/N P-17EHD-015P CCR-53S CR-53S 022019 Q1