Series CCS-18/CS-18 High Power Multi-Throw DC12 GHz COAX SWITCHES Normally Open Coaxial Switch PART NUMBER DESCRIPTION CCS-18 Commercial Normally Open Multi-throw, DC-12GHz CS-18 Elite Normally Open Multi-throw, DC-12GHz The CCS-18/CS-18 is a broadband multi-position coaxial switch designed to switch RF signals from one input port to any one of 3 through 8 output ports. It is readily adapted to any 50 Ohms transmission line system. The standard actuator gives individual solenoid control of each position and when de-energized, all positions are open. Standard actuator voltage is 28 VDC. The primary advantage of this switch over the miniature versions shown on previous pages is the higher power handling capability. ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Operating Temperature Form Factor Multi-Throw, Commercial Model, CCS-18 40C to 65C break before make Elite Model, CS-18 55C to 85C Frequency Range Vibration (MIL-STD-202 Method 214, 10 gs RMS CCS-18 DC12 GHz Condition D, non-operating) CS-18 DC12 GHz Shock (MIL-STD-202 Method 213, 500 gs Characteristic Impedance 50 Ohms Condition D, non-operating) Operate Time 10 ms (max.) Standard Actuator Life 3,000,000 cycles Release Time 10 ms (max.) Actuator Life w/ Additional Features 1,000,000 cycles Actuation Voltage Available 12 15 24 28 V Connector Type Type N or TNC Actuation Current, max. ambient 600 700 230 270 mA Humidity (Moisture Seal) Available Weight 9 oz. (255.2g) (max.) PERFORMANCE CHARACTERISTICS: N CONNECTOR OPTION (TNC CONNECTOR, 11GHZ MAX.) Frequency DC3 GHz 36 GHz 69 GHz 912 GHz Insertion Loss, dB, 0.2 0.2 0.3 0.4 max. Isolation, dB, min. 80 80 80 75 VSWR , max. 1.3:1 1.3:1 1.5:1 1.7:1 PART NUMBERING SYSTEM ** CCS-18 N 1 6 C - T Series Options Connectors Actuator Type Actuator Voltage Number of Positions CONNECTOR ACTUATOR VOLTAGE NUMBER OF POSITIONS ACTUATOR TYPE OPTIONS N: TYPE N FEMALE 1: 28 VDC NORMALLY OPEN 3: SP3T 0: NO INDICATOR CONTACTS T: TTL DRIVERS WITH DIODES T: TNC FEMALE 2: 15 VDC NORMALLY OPEN 4: SP4TC: INDICATOR CONTACTS D: COIL TRANSIENT SUPPRESSION DIODES 3: 12 VDC NORMALLY OPEN 5: SP5TS: D-SUB CONNECTOR* 4: 24 VDC NORMALLY OPEN 6: SP6TTD: DECODERS AND TTL DRIVERS WITH DIODES 7: SP7T 8: SP8TM: MOISTURE SEAL **SEE PARTS LIST ON PAGE 13-16 * D-Sub Connector may be 9 or 15 pin depending on For additional options, please contact factory. number of throws. (See Connector Pinout page) 2013 TELEDYNE RELAYS (800) 284-7007 www.teledynecoax.com CCS-18/CS-18 Page 1 CCS-18 CS-18 072013 Q3Series CCS-18/CS-18 High Power Multi-Throw DC12 GHz COAX SWITCHES Normally Open Coaxial Switch SCHEMATICS AND MECHANICAL OUTLINE FOR SP3T-SP6T SWITCHES TTL Analog Indicators 14X SOLDER TERMINALS SOLDER WIRE MAXIMUM TEMP 250C FOR NO MORE THAN 5 SEC SP6T SP5T SP4T SP3T SP3T - SP6T H = 2.15 STD & Indicator Model SP3T - SP6T H = 2.65 All OTHER Models MECHANICAL OUTLINE FOR SP7T & SP8T SWITCHES SP7T SP8T 14X SOLDER TERMINALS SOLDER WIRE MAXIMUM TEMP 250C FOR NO MORE THAN 5 SEC SP7T & SP8T H = 2.15 STD Model SP7T & SP8T H = 2.65 All OTHER Models -S OPTION 9-PIN D-SUB OR 15-PIN D-MICRO CONNECTOR (EXAMPLE: CCS-18N160-S) CCS-18/CS-18 Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2013 TELEDYNE COAX SWITCHES CCS-18 CS-18 072013 Q3