CCS-18N360 Teledyne

High Power Connectors Standard N Type Connectors Commercial CCS-18 High Power DC-12 GHz Multi - Throw Switch SP3T to SP6T versions only Normally Open The CCS-18 Switch is a broadband multi-position coaxial switch designed to switch RF signals from one input port to any one of 3 through 6 output ports. It is readily adapted to any 50 Ohms transmission line system. The standard actuator gives individual solenoid control of each position and when de-energized, all positions are open. Standard actua- tor voltage is 28 VDC. The primary advan- Specifications tage of this switch over the miniature versions shown on previous pages is the higher power RF Contacts: Break before make handling capability. O Actuator Voltage (VDC) 20C 121528 Current (mA) 600 480 270 Switching Time: 20 msec max Connectors: SMA (f), TNC(f)(max frequency 11GHz only)*, N Type (f) Weight: 9 oz. max (3 Position) 11 oz (6 Position) O O Temperature Range: -25 C to +65 C (Operating) Shock: MIL-STD-202 Method 213, Condition D (500G Non Operating) Vibration: MIL-STD-202 Method 214, Condition D (10G RMS Non Operating) Humidity: Moisture Seal Available Typical Contact Life: 5 Million Cycles RF Power Handling 3000 Typical Performance 800 400 200 15 80 25 40 0.01 12.0 Frequency GHz 10 0.1 1.0 4.0 10 18 26.5 Frequency GHz 0.0 Specifications DC-1 GHz 1-4 GHz 4-12 GHz (TNC limit 11GHz) 0.4 VSWR (max) 1.25:1 1.40:1 1.70:1 60 Insertion Loss (max) 0.30 dB 0.40 dB 0.50 dB 70 Isolation (min) 70.0 dB 60.0 dB 60.0 dB 80 90 0.01 12.0 Frequency GHz Specifications subject to change without notice. www.rfswitches.com email: switches teledyne.com Tel: 800 -284-7007 01/2004 116 Power CW (Watts) Return Loss IL dB Isolation dBCommercial CCS-18 High Power DC-12 GHz Multi - Throw Switch SP3T to SP6T versions only Normally Open TTL Analog Indicators SP6T H = 2.15 STD Model H = 2.65 TTL Model SP5T SP4T SP3T Part Numbering System for CCS-18 (Normally Open) CCS-18 N 1 5 O - T Series Options Connectors Actuator Type Actuator Voltage Number of Switch Positions Connector Actuator Voltage Number of Actuator Type Options S: SMA Female Positions T: TTL Drivers with Diodes 1: 28Vdc Normally Open O: No Indicator Contacts N: N type Female 2: 15Vdc Normally Open 3: SP3T C: Indicator Contacts R: Positive + Common T: TNC Female* 3: 12Vdc Normally Open 4: SP4T TD: TTL Driver with Decoder 5: SP5T For other options contact Factory 6: SP6T See additional Datasheet for SP7T and SP8T versions Specifications subject to change without notice. www.rfswitches.com email: switches teledyne.com Tel: 800- 284-7007 01/2004 117