Series CCT-38S/CT-38S Multi-Throw DC18 GHz/DC-22 GHz COAX SWITCHES Normally Open Coaxial Switch PART NUMBER DESCRIPTION CCT-38S Commercial Normally Open Multi-throw, DC-18GHz CT-38S Elite Normally Open Multi-throw, DC-22GHz The CCT-38S/CT-38S is an internally terminated, broadband, multi-throw, electromechanical coaxial Available with switch designed to switch a microwave signal from a common input to any of 3, 4, 5, or 6 outputs. USB & Ethernet Control The characteristic impedance is 50 Ohms. Internal terminations provide an impedance match for the unselected ports. The switches are small using the popular connector spacing on a 1.062 dia. circle. Each position has an individual actuator mechanism allowing random position selection. This also minimizes switching time. Click here The CCT-38S/CT-38S comes with a normally open actuator. For the normally open actuator, all ports are MMC SERIES terminated in 50 Ohms, except the common input port which is open when the switch is de-energized. ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Operating Temperature Form Factor Multi-Throw,, Commercial Model, CCT-38S 40C to 65C break before make Elite Model, CT-38S 55C to 85C Frequency Range Vibration (MIL-STD-202 Method 214, 10 gs RMS CCT-38S DC18 GHz Condition D, non-operating) CT-38S DC22 GHz Shock (MIL-STD-202 Method 213, 500 gs Characteristic Impedance 50 Ohms Condition D, non-operating) Terminations 50 , 2 Watts CW max. Standard Actuator Life 5,000,000 cycles Operate Time 15 ms (max.) Actuator Life w/ Additional Features 1,000,000 cycles Release Time 15 ms (max.) Connector Type SMA Actuation Voltage Available 12 15 24 28 V Humidity (Moisture Seal) Available Actuation Current, max. ambient 420 350 250 200 mA Weight 6 oz. (170.1g) (max.) TYPICAL PERFORMANCE CHARACTERISTICS Frequency DC4 GHz 48 GHz 812 GHz 1216 GHz 16-20 GHz 20-22 GHz Insertion Loss, dB, typ. 0.1 0.2 0.2 0.3 0.3 0.4 Isolation, dB, typ. 80 80 80 80 75 70 VSWR , typ. 1.05:1 1.1:1 1.2:1 1.2:1 1.2:1 1.2:1 For maximum limits, please see charts on pages 7-9 PART NUMBERING SYSTEM ** CCT-38 S 1 6 C - T Series Options Connectors Actuator Type Actuator Voltage Number of Positions CONNECTOR ACTUATOR VOLTAGE NUMBER OF POSITIONS ACTUATOR TYPE OPTIONS S: SMA FEMALE 1: 28 VDC NORMALLY OPEN 3: SP3T 0: NO INDICATOR CONTACTS T: TTL DRIVERS WITH DIODES 2: 15 VDC NORMALLY OPEN 4: SP4TC: INDICATOR CONTACTS D: COIL TRANSIENT SUPPRESSION DIODES 3: 12 VDC NORMALLY OPEN 5: SP5T D: SELF CUTOFF ONLY R: POSITIVE + COMMON 4: 24 VDC NORMALLY OPEN 6: SP6TTD: DECODERS AND TTL DRIVERS WITH DIODES ** SEE PARTS LIST ON PAGE 12-14 M: MOISTURE SEAL S: D-SUB CONNECTOR* * D-Sub Connector may be 9 or 15 pin depending on For additional options, please contact factory. number of throws. (See Connector Pinout page) 2016 TELEDYNE RELAYS (800) 284-7007 www.teledynecoax.com CCT-38S/CT-38S Page 1 CCT-38S CT-38S 092016 Q3Series CCT-38S/CT-38S Multi-Throw DC18 GHz/DC-22 GHz COAX SWITCHES Normally Open Coaxial Switch SCHEMATICS AND MECHANICAL OUTLINE Analog Indicators TTL SP3T 14X SOLDER TERMINALS SOLDER WIRE MAXIMUM TEMP 250C FOR NO MORE THAN 5 SEC SP5T SP6T SP4T H = 1.85 STD Models /P 0QUJPOT H = 2.50 All OTHER Models -S OPTION 9-PIN D-SUB OR 15-PIN D-MICRO CONNECTOR (EXAMPLE: CCT-38S160-S) CCT-38S/CT-38S Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2016 TELEDYNE COAX SWITCHES CCT-38S CT-38S 092016 Q3